Proud to be a UK-based company
Contact us
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 1.698 kg |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.44
Important compatibility info
| Number of Ribs | 6 |
| Function | Alternator |
| Alternator Charge Current | 75 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Weight | 5.0 kg |
| Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Number of Ribs | 5 |
| Width | 37 mm |
| Parameter | 6PK |
| Outer diameter | 138 mm |
| Inner diameter | 27 mm |
| Weight | 1.57 kg |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 75 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.9 kg |
| Current Strength | 75 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Weight | 3.10 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 686 mm |
| Min. Length | 411 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Function | Idler Arm |
| Placement on Vehicle | Front Axle |
| Spanner Size | 17 |
| Weight | 2.83 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Idler Arm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 2 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 82 mm |
| Weight | 5.98 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.40
Important compatibility info
| Weight | 4.87 kg |
| Placement on Vehicle | Driver side |
| Function | Repair Kit, kingpin |
| Extra Description | febi Plus |
| Type | Repair Kit, kingpin |
| Paired article numbers | 198303 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.24
Important compatibility info
| Height | 410 mm |
| Outer diameter | 325 mm |
| Inner diameter | 193 mm |
| Filter type | Filter Insert |
| Weight | 4.40 kg |
| Type | Air filter kit |
| Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.17
Important compatibility info
| Length | 52 mm |
| Spanner Size | 27 |
| Function | Sensor, compressed-air system |
| External Thread Size | M16 x 1,5 |
| Weight | 0.040 kg |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.09
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 2.5 kg |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.06
Important compatibility info
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 059 906 461 S |
| Number of Connectors / Ports | 5 |
| Weight | 0.20 kg |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.03
Important compatibility info
| Weight | 4.12 kg |
| Replaces | 19205; 20047 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 695 mm |
| Min. Length | 425 mm |
| Pipe Diameter | 66 mm. 59 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.99
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 51 mm |
| Outer diameter | 88 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Weight | 3.25 kg |
| Outer diameter 1 | 79 mm |
| Outer diameter 2 | 143 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.91
Important compatibility info
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 23.2 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Weight | 4.056 kg |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171116)
- 2x Febi Link/Coupling Rod, stabiliser bar (102810)
£127.84
Important compatibility info
| Placement on Vehicle | Left Front |
| Weight | 8.120 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Shore-A hardness value, base body | 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.79
Important compatibility info
| Weight | 3.005 kg |
| for OE number | 003 250 74 15 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.76
Important compatibility info
| Weight | 5.6 kg |
| Placement on Vehicle | Rear, Rear Axle |
| Outer diameter | 228 mm. 168 mm |
| Thickness | 538 mm. 239 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.76
Important compatibility info
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Weight | 8.4 kg |
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Placement on Vehicle | Front Axle |
| Outer diameter | 225 mm. 258 mm |
| Thickness | 500 mm. 210 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.71
Important compatibility info
| Operating Mode | Electronic |
| Weight | 0.73 kg |
| for OE number | 23897052 |
| Function | Accelerator Pedal |
| Type | Accelerator Pedal |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£127.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023