Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Length | 128 mm |
Material | Thermoplast |
Inner diameter 1 | 40 mm |
Inner diameter 2 | 97 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.286 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100001)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (101027)
Important compatibility info
Outer diameter | 153 mm |
Type | Shaft Seal, crankshaft |
Material | PTFE (polytetrafluoroethylene) |
Weight | 0.08 kg |
Width | 13 mm |
Placement on Vehicle | frontal sided |
Inner diameter | 135 mm |
Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Weight | 0.158 kg |
Outer diameter | 82 mm. 64 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 34 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Pressure | 1.2 bar |
Type | Cap, coolant tank |
Material | Plastic |
for OE number | 21360115 |
Function | Cap, coolant tank |
Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.244 kg |
Placement on Vehicle | Lower Front Axle, Rear |
Outer diameter | 59 mm. 24 mm |
Thickness | 55 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 114 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Weight | 0.276 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48815)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chemical Properties | Elastic |
Weight | 0.11 kg |
Length | 1029 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.14 kg |
Placement on Vehicle | both sides |
Length | 255 mm |
Housing Diameter | 15 mm |
Eject Force | 420 N |
Stroke | 104 mm |
Mounting points diameter | 8.3 mm |
Piston conrod diameter | 6 mm |
Type | Gas Spring, bonnet |
Function | Gas Spring, bonnet |
Housing length | 143.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 80 |
Function | Nut, kingpin |
Thickness | 21.6 mm |
Type | Nut, kingpin |
Weight | 0.277 kg |
Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Suspension Rod |
Material | Steel |
Length | 310 mm |
Placement on Vehicle | Front Axle Right |
Weight | 0.406 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
for OE number | 129 545 02 24 |
Function | Sensor, coolant level |
Number of Connectors / Ports | 2 |
Housing Colour | Black/White |
Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.215 kg |
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 108 mm |
Inner diameter 1 | 24 mm |
Material | Rubber |
Length | 129 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.43 kg |
Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 100 mm |
Inner diameter 1 | 21 mm |
Material | Rubber |
Length | 96 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03362)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Shape/Form | rectangular |
Weight | 0.112 kg |
Height | 62 mm |
Length | 90 mm |
Width | 64 mm |
Material | Plastic |
Colour | Black |
Type | Lift Point Pad, jack |
Function | Lift Point Pad, jack |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 11 mm |
Placement on Vehicle | frontal sided |
Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
Weight | 0.052 kg |
Inner diameter | 78 mm |
Function | Shaft Seal, crankshaft |
Outer diameter | 104 mm |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 0.199 kg |
Length | 70 mm |
Width | 54 mm |
Outer diameter | 41 mm |
Thickness | 54 mm |
Inner diameter | 16.5 mm |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Length | 104.5 mm |
Valve head diameter | 24.54 mm |
Notches / Holes Number | 1 |
Function | Exhaust Valve |
Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.264 kg |
Additional Information 2 | with oil sump gasket |
Height | 46 mm |
Length | 244 mm |
Width | 152 mm |
Function | Hydraulic Filter Kit, automatic transmission |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic, PA (polyamide) |
Function | Guide, timing chain |
Friction Lining Material | Plastic |
Placement on Vehicle | Left |
Weight | 0.118 kg |
Type | Guide, timing chain |
Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023