Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Sheet Steel |
| Rod/Strut | Guide Rod |
| Hole Spacing | 223 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Lower, Rear Axle Right |
| Function | Rod/Strut, wheel suspension |
| Weight | 0.550 kg |
| Additional Information | with rubber-metal mounts |
| Type | Rod/Strut, wheel suspension |
| Replaces | 42440 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.22
Important compatibility info
| Weight | 0.053 kg |
| Type | Gasket, timing case cover |
| Function | Gasket, timing case cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, crankshaft (31329)
- 1x Febi Gasket, housing cover (crankcase) (48868)
- 1x Febi Gasket, timing case (48869)
£13.22
Important compatibility info
| Outer diameter | 40 mm |
| Additional Information | with counter nut |
| Length | 318 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 15 |
| External Thread Size | M16 x 1,5 |
| Function | Inner Tie Rod |
| Weight | 0.693 kg |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.22
Important compatibility info
| Additional Information 2 | with crown nut |
| Weight | 0.350 kg |
| Internal Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Steel |
| Type | Tie Rod End |
| Function | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.22
Important compatibility info
| Weight | 0.03 kg |
| Length | 102 mm |
| Material | Plastic |
| Inner diameter | 24 mm. 33 mm |
| Function | Spark Plug Pipe |
| Extra Description | febi Plus |
| Type | Spark Plug Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.22
Important compatibility info
| Length | 1287 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Weight | 0.131 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.22
Important compatibility info
| Length | 103 mm |
| Material | Rubber |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 65 mm |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Weight | 0.195 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100621)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45636)
- 2x Febi Molybdenum Grease (02582)
£13.22
Important compatibility info
| Weight | 0.127 kg |
| Material | Plastic |
| Outer diameter | 60 mm |
| Mounting points diameter | 8 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.22
Important compatibility info
| Rod/Strut | Coupling Rod |
| Thickness | 76 mm |
| Placement on Vehicle | Front Axle Left |
| Thread Length | 27.4 mm |
| Paired article numbers | 109575 |
| Length | 363 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Weight | 0.5 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 65 mm |
| Width | 60 mm |
| Material | PU (Polyurethane) |
| Weight | 0.079 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Length | 178 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.19 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Pipe Diameter | 8 mm |
| Material | Steel |
| External Thread Size | M10 x 1,25 |
| Weight | 0.200 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 155 mm |
| Paired article numbers | 21876 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Length | 295.9 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5 |
| Type | Inner Tie Rod |
| Weight | 0.700 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
| Function | Ball Joint |
| Weight | 0.450 kg |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Weight | 0.25 kg |
| Additional Information | with gaskets/seals |
| Height | 119 mm |
| Outer diameter | 110 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Function | Resistor, interior blower |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 4 |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Placement on Vehicle | engine sided |
| Length | 1334 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| Weight | 103.0 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Weight | 0.13 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 545 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Weight | 0.490 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 02052 |
| Function | Ball Joint |
| Cone Size | 19 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| Length | 1210 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Weight | 0.115 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023