Important compatibility info
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 76 mm |
| Material | Rubber |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 51 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (37217)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (10248)
- 2x Febi Mounting, stabiliser bar (07200)
- 2x Febi Fastening Bolt, stabiliser bar (06858)
- 2x Febi Screw (01634)
- 4x Febi Screw (10247)
- 4x Febi Fastening Bolt, stabiliser bar (10249)
- 8x Febi Springwasher (01075)
- 4x Febi Nut (01697)
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 120 mm |
| Spanner Size | 25 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 216 mm |
| External Thread Size | M14 x 1,5, M12 x 1 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Control Type | Push Actuation |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 8 |
| Function | Hazard Warning Light Switch |
| Extra Description | febi Plus |
| Type | Hazard Warning Light Switch |
| Additional Information 2 | with control light |
| Placement on Vehicle | Dashboard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 22.2 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Iron |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Surface | Painted |
| Function | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | 30736 |
| Material | Steel |
| Length | 105 mm |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 64 mm |
| Inner diameter | 34 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 193 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22302)
- 2x Febi Nut, exhaust manifold (01554)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
| Replaces | 13066 |
| Additional Information | with bump stop |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | outer, Rear Axle Left, Rear Axle Right, Lower, Front |
| Width | 38 mm |
| Outer diameter | 38 mm |
| Thickness | 38 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 12.4 mm |
| Function | Ball Joint |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Wheel Bearing |
| Inner diameter | 41 mm |
| Bearing Type | Tapered Roller Bearing |
| Width | 19.5 mm |
| Outer diameter | 73.5 mm |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1689 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Paired article numbers | 101803 |
| Replaces | 16919 |
| Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from expansion tank to coolant reg housing/add pump |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| Hose Length | 425 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 44 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Additional Information 2 | with screw, with seal ring |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, wing holder |
| Type | Mounting, wing holder |
| Inner diameter | 60 mm |
| Outer diameter | 86 mm |
| Material | Rubber |
| Length | 126 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Outer diameter | 102 mm |
| Additional Information 2 | with seal ring |
| Filter type | Spin-on Filter |
| Height | 104 mm |
| Internal Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Type | Bush, driver cab suspension |
| Function | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 15 mm |
| Number of Connectors / Ports | 3 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 87 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
| for OE number | 7589135 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ball Joint |
| Cone Size | 22 mm |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1145 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer Length | 670 mm |
| Function | Oil Dipstick |
| Length from grip collar to min. marking | 616 mm |
| Length from grip collar to max. marking | 596 mm |
| Extra Description | febi Plus |
| Type | Oil Dipstick |
| Colour | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 7 |
| DIN / ISO | 3731 - Typ S |
| Version | OE Standard |
| Material | Plastic |
| Additional Information | with splash protection caps |
| Additional Information 2 | with connector parts |
| Voltage | 24 V |
| Function | Socket |
| Type | Socket |
| Paired article numbers | 172655 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| External Thread Size | M10 x 1,25 |
| Pipe Diameter | 8 mm |
| Thread Length | 21 mm |
| Placement on Vehicle | Front Axle Left |
| Length | 216 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 34560 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Surface | Painted |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front, Right Front |
| Length | 42 mm |
| Width | 18.5 mm |
| Material | Plastic |
| Thickness | 24 mm. 35 mm |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Control Type | Rocker Actuation |
| Function | Switch, window regulator |
| Extra Description | febi Plus |
| Type | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Material | Rubber |
| Inner diameter | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























