Important compatibility info
| Width | 45 mm |
| Outer diameter | 72 mm |
| Inner diameter | 32 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173057)
- 1x Febi Circlip (173802)
- 1x Febi Shaft Seal, wheel bearing (173803)
Important compatibility info
| Additional Information | with lock nut |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Spanner Size | 25 |
| Paired article numbers | 180524 |
| Placement on Vehicle | Front Axle Left |
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M18 x 1,5 |
| Length | 156 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Seal Material | Rubber/Metal |
| Operating Mode | pneumatic |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Number of grooves | 7 |
| Additional Information 2 | switchable water pump |
| Pulleys | with belt pulley |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Paired article numbers | 181392 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
| Inner diameter | 42 mm |
| Outer diameter | 54 mm |
| Material | ACM (Polyacrylate) |
| Placement on Vehicle | frontal sided |
| Width | 6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tie Rod End |
| Function | Tie Rod End |
| Spanner Size | 23 |
| Additional Information | with lock nut |
| Paired article numbers | 183437 |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Length | 197 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 284 mm |
| Diameter | 1 mm |
| Material | Steel |
| Paired article numbers | 184018 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Bearing Kit |
| Inner diameter | 42 mm |
| Placement on Vehicle | Rear Axle |
| Width | 39 mm |
| Type | Wheel Bearing Kit |
| Outer diameter | 76 mm |
| Additional Information 2 | with retaining ring |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173845)
- 1x Febi Circlip (173844)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with nut, with washers |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M12 x 1,25 |
| Length | 170 mm |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 23641 |
| Colour | Black |
| Surface | Painted |
| External Thread Size | M12 x 1,25 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 28700 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Extra Description | ProKit |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 43122 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 28701 |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30430 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter 1 | 79 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 51 mm |
| Outer diameter | 90 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 143 mm |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (23369)
- 4x Febi Screw (18396)
Important compatibility info
| Material | Brass |
| Spanner Size | 19 |
| Colour | Green |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| External Thread Size | M12 x 1,5 |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 128 mm |
| Outer diameter | 128 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| for OE number | 3748.A3 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 275 mm |
| Material | Steel |
| Paired article numbers | 32064 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Pipe Diameter | 10 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| External Thread Size | M8 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Rod/Strut | Coupling Rod |
| Thickness | 1 mm |
| Thread Length | 23 mm |
| Diameter | 1 mm |
| Length | 100 mm |
| Material | Steel |
| Spanner Size | 13, 12 |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 86 mm |
| Spanner Size | 19 |
| Thread Length | 58.5 mm |
| Bolt Head/Nut Design | Hexagon Socket |
| Quality/ Grade | 10.9 |
| Function | Screw |
| Screw length below head | 72 mm |
| Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 16 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Inner diameter | 83.6 mm |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Silver |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 113 mm |
| Spanner Size | 17 |
| Paired article numbers | 48032 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 70 mm |
| Thickness | 59.5 mm |
| Rod/Strut | Coupling Rod |
| Thread Length | 20 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 48 mm |
| Placement on Vehicle | frontal sided |
| Height | 7 mm |
| Material | FPM (fluoride rubber) |
| Inner diameter | 34 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 113 mm |
| Spanner Size | 19 |
| Paired article numbers | 108796 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 222 mm |
| Paired article numbers | 108891 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | frontal sided |
| Material | Metal |
| Sealing lip material | PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) |
| Function | Housing Cover, crankcase |
| Type | Housing Cover, crankcase |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with integrated magnetic sensor ring |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (101297)
- 4x Febi Screw (101133)
- 1x Febi Nut, kingpin (12181)
Important compatibility info
| Inner diameter | 50 mm |
| Bearing Type | Tapered Roller Bearing |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 47 mm |
| Outer diameter | 88 mm |
| Additional Information | with axle nut |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173383)
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Placement on Vehicle | Front Axle Left |
| Type | Splash Guard, brake disc |
| Paired article numbers | 176423 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane) |
| Length | 75 mm |
| Width | 72 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Thickness | 81 mm |
| Outer diameter | 69 mm |
| Inner diameter | 13.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 155 mm |
| Diameter | 1 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 148 mm |
| Additional Information 2 | with crown nut |
| Spanner Size | 17 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| External Thread Size | M12 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | outer, Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Length | 115 mm |
| Thickness | 71 mm |
| Spanner Size | 19 |
| External Thread Size | M18 x 1,5, M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 220 mm |
| Width | 130 mm |
| Thickness | 110 mm |
| Inner diameter 1 | 33.9 mm |
| Inner diameter 2 | 33.3 mm |
| Function | Oil Pump |
| for OE number | 0682 560 |
| Internal Thread Size | M10 x 1,5 |
| Type | Oil Pump |
| Number of Teeth | 11. 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Thread Length | 26 mm |
| Rod/Strut | Coupling Rod |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right |
| Spanner Size | 17 |
| Thickness | 90 mm |
| Material | Steel |
| Paired article numbers | 175655 |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Diameter | 1 mm |
| Length | 201 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 650 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 05640 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 320 mm |
| Material | Steel |
| Paired article numbers | 31570 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| External Thread Size | M10 x 1,25 |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 14 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 225 mm |
| Paired article numbers | 21494 |
| Quality/ Grade | 10 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 82 |
| Surface | Coated |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 245.5 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 15 mm |
| Outer diameter | 91 mm |
| Inner diameter | 49 mm |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | frontal sided |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
| for OE number | 22441-2B610 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 140 mm |
| Inner diameter | 28 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































