Important compatibility info
Weight | 0.313 kg |
Placement on Vehicle | Lower Front Axle, both sides |
Function | Repair Kit, guide strut |
Type | Repair Kit, guide strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (04192)
- 1x Febi Screw (04225)
- 1x Febi Nut (05161)
- 2x Febi Washer (04191)
Important compatibility info
Filter type | Filter Insert |
Outer diameter | 113 mm |
Inner diameter | 56 mm |
Weight | 0.378 kg |
Function | Oil Filter |
Height | 312 mm |
Type | Oil Filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 252 mm |
Height | 60 mm |
Width | 204 mm |
Filter type | Filter Insert |
Weight | 0.65 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.164 kg |
Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
Length | 105 mm |
Material | Thermoplast |
Inner diameter 2 | 82 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100640)
- 1x Febi Clamping Clip (45643)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (100869)
Important compatibility info
Placement on Vehicle | Front Axle Right, Front Axle Left |
Length | 208 mm |
Additional Information | with counter nut |
Outer diameter | 40 mm |
Spanner Size | 38 |
Weight | 0.474 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 58 mm |
Inner diameter 2 | 61 mm |
Function | Radiator Hose |
Weight | 0.5 kg |
Type | Radiator Hose |
Hose Length | 184 mm |
Wall Thickness | 6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.540 kg |
Placement on Vehicle | Left Rear |
Length | 1674 mm |
Function | Cable Pull, parking brake |
Paired article numbers | 101804 |
Type | Cable Pull, parking brake |
Replaces | 16918 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.515 kg |
Function | Tie Rod End |
for OE number | 1306716080 |
Extra Description | ProKit |
Type | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M16 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 405 mm |
Height | 34 mm |
Width | 174 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Weight | 0.260 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.400 kg |
Mounting points diameter | 10.5 mm |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 18 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right, outer |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Weight | 0.450 kg |
Cone Size | 20 mm |
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.500 kg |
Paired article numbers | 14440 |
Placement on Vehicle | Front Axle Right, Lower |
External Thread Size | M12 x 1,5 |
Function | Ball Joint |
Extra Description | ProKit |
Additional Information | with fastening/mounting material |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (12660)
- 1x Febi Securing Plate, ball joint (14238)
- 3x Febi Clamping Bolt, ball joint (07866)
- 1x Febi Nut, ball joint (21884)
Important compatibility info
Weight | 0.324 kg |
Placement on Vehicle | Front Axle Right |
Length | 250 mm |
Paired article numbers | 17207 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22338)
- 2x Febi Nut (22263)
Important compatibility info
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 380 mm |
Weight | 0.645 kg |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 55 mm |
Diameter 1 | 34 mm |
Diameter 2 | 67 mm |
Opening Temperature | 75 °C |
Function | Thermostat, coolant |
Weight | 0.05 kg |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (17918)
- 1x Febi Seal, thermostat (17964)
Important compatibility info
Weight | 0.274 kg |
Placement on Vehicle | Rear Axle Right |
Length | 261 mm |
Width | 27.8 mm |
Material | Steel |
Paired article numbers | 29695 |
Rod/Strut | Coupling Rod |
External Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with lock nut |
Hole Spacing | 233 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 100.9 mm |
Function | Exhaust Valve |
Weight | 0.037 kg |
Type | Exhaust Valve |
Notches / Holes Number | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 82 mm |
Thickness | 46 mm |
Inner diameter | 12.2 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.228 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Intake Valve |
Type | Intake Valve |
Notches / Holes Number | 3 |
Weight | 0.037 kg |
Valve head diameter | 24 mm |
Valve stem diameter | 6 mm |
Length | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Screw Plug, oil sump |
Screw length below head | 25 mm |
Length | 28 mm |
Material | Plastic |
Seal Material | FPM (fluoride rubber) |
Thickness | 29 mm |
Inner diameter | 18 mm |
Weight | 0.009 kg |
Type | Screw Plug, oil sump |
Additional Information 2 | with seal ring |
Bolt Head/Nut Design | Hexagon Socket |
Spanner Size | 9 |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.097 kg |
Function | Coolant Flange |
Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Type | Air Filter |
Function | Air Filter |
Filter type | Filter Insert |
Length | 240 mm |
Outer diameter | 155 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.114 kg |
Length | 1113 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.361 kg |
Piston Diameter | 19 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Grey Cast Iron |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.116 kg |
Length | 1138 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Function | Bushing, axle beam |
Inner diameter | 17 mm. 33 mm |
Thickness | 70 mm |
Outer diameter | 81 mm. 78 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Length | 116 mm |
Material | Steel |
Paired article numbers | 27421 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.310 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,75 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Inner diameter | 30 mm |
Function | Rubber Buffer, suspension |
Weight | 0.375 kg |
Type | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle, Front Axle |
Outer diameter 2 | 110 mm |
Outer diameter 1 | 105 mm |
Height | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Weight | 0.162 kg |
Filter type | Filter Insert |
Length | 198 mm |
Height | 42 mm |
Width | 171 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Weight | 0.03 kg |
Cable Length | 591 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023