Important compatibility info
Function | Air Filter |
Type | Air Filter |
Weight | 0.389 kg |
Filter type | Filter Insert |
Width | 144 mm |
Height | 42 mm |
Length | 344 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.31 kg |
Placement on Vehicle | Lower |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Inner diameter | 30 mm |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Function | Radiator Hose |
Wall Thickness | 4.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.28 kg |
Height | 48 mm |
Width | 176 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Length | 376 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Length | 252 mm |
Height | 69 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Weight | 0.35 kg |
Type | Air Filter |
Width | 234 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Grey Cast Iron |
Weight | 0.350 kg |
Function | Wheel Brake Cylinder |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Wheel Brake Cylinder |
Piston Diameter | 19.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 11 mm |
Weight | 0.503 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 16 mm |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (19543)
- 3x Febi Screw (18550)
- 3x Febi Nut (18551)
Important compatibility info
Weight | 0.128 kg |
Length | 1256 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.049 kg |
Height | 80 mm |
Outer diameter | 59 mm |
Function | Fuel filter |
Gasket outer diameter | 69 mm |
Gasket inner diameter | 63 mm |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Filter type | Pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 734 mm |
Weight | 0.041 kg |
Number of Ribs | 4 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Chemical Properties | Elastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Outer diameter 1 | 65.5 mm |
Inner diameter | 23.5 mm |
Length | 61.5 mm. 80 mm |
Material | Rubber |
Outer diameter 2 | 70.5 mm |
Function | Bush, driver cab suspension |
Placement on Vehicle | Front, both sides |
Type | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023