Important compatibility info
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 2 |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 273 mm. 210 mm |
| Thickness | 203 mm. 675 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1231 mm |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (183223)
- 1x Febi Belt Tensioner, v-ribbed belt (184025)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (182534)
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 53 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 110 A |
| Belt Pulley Diameter | 47 mm |
| Current Strength | 110 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without sensor |
| Type | Housing, fuel filter |
| External Thread Size | M14 x 1, M32 x 1,5 |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 516 mm. 194 mm |
| Placement on Vehicle | non-steered leading axle |
| Outer diameter | 226 mm. 198 mm |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M24 x 1,5, M16 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 49 mm |
| Current Strength | 90 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 1315 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 5 0436 1204 |
| Type | Rocker Arm, engine timing |
| Function | Rocker Arm, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Placement on Vehicle | Rear Axle Right, Front Axle Left |
| Length | 470 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188117 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 434 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Shaft Cam | Z-cam |
| Length | 452 mm |
| Number of Teeth | 48 |
| Paired article numbers | 188173 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 415 mm |
| Placement on Vehicle | Front Axle Right, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Width | 120 mm |
| Height | 120 mm |
| Length | 520 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Diameter 1 | 60 mm |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 682 mm |
| Min. Length | 408 mm |
| Pipe Diameter | 63 mm. 51 mm |
| Piston conrod diameter | 18 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 570 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, control/trailing arm (35324)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 239 |
| Width | 25.4 mm |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14640)
- 1x Febi Water Pump, engine cooling (18896)
Important compatibility info
| Type | Repair Kit, kingpin |
| Outer diameter | 50 mm |
| Length | 225 mm |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (104082)
- 1x Febi Lock Ring, steering knuckle (104179)
- 1x Febi Lock Ring, steering knuckle (104180)
- 1x Febi Bush, kingpin (104181)
- 2x Febi Bush, steering knuckle (29780)
- 1x Febi Seal Ring, steering knuckle (29724)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (105835)
- 1x Febi Nut (107681)
- 1x Febi Lock Ring, steering knuckle (107269)
- 1x Febi Spacer, kingpin (107484)
- 1x Febi Spacer, kingpin (107485)
- 1x Febi Spacer, kingpin (107486)
- 1x Febi Spacer, kingpin (107487)
- 1x Febi Spacer, kingpin (107488)
- 1x Febi Spacer, kingpin (107489)
- 1x Febi Spacer, kingpin (107490)
Important compatibility info
| for OE number | 21789684 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 934 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30.2 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 596 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 29 mm |
| Bolt Hole Circle Diameter | 64 mm |
| Outer diameter | 136 mm |
| Thickness | 90 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 136 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















