Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 174 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 2 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Material | Thermoplastic polyester elastomer |
| Additional Information 2 | with clamps |
| Inner diameter 2 | 61 mm |
| Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Length | 140 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.333 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.335 kg |
| Height | 56 mm |
| Outer diameter | 408 mm |
| Inner diameter | 325 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Function | Thermostat, coolant |
| Weight | 0.112 kg |
| Opening Temperature | 79 °C |
| Heating / Cooling | without vent hole |
| Additional Information 2 | with seal ring |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (10528)
- 1x Febi Gasket, water pump (03505)
£11.78
Important compatibility info
| Height | 194 mm |
| Outer diameter | 96 mm |
| Filter type | Spin-on Filter |
| Function | Oil Filter |
| Internal Thread Size | 3/4" - 16 UNF |
| Weight | 0.665 kg |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.400 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.290 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| for OE number | 1300716080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.451 kg |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17 mm |
| Mounting points diameter | 10.5 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Type | Accessory Kit, brake shoes |
| Function | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
| Weight | 0.168 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Outer diameter | 44.2 mm |
| Thickness | 59 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, outer |
| Material | Rubber/Metal |
| Inner diameter | 14.3 mm |
| Weight | 0.262 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.246 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Inner diameter | 14 mm |
| Colour Coding | Green |
| Replaces | 08307 |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 37 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (08298)
- 1x Febi Rolling Bearing, suspension strut support mount (12594)
£11.78
Important compatibility info
| Weight | 0.1 kg |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Length | 450 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Rod/Strut | Coupling Rod |
| Length | 245 mm |
| Placement on Vehicle | Front Axle |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 0.318 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Placement on Vehicle | Rear Axle Upper, Rear, inner, Outer |
| Outer diameter | 48 mm. 25 mm |
| Thickness | 48 mm |
| Inner diameter | 20 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.157 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Outer diameter | 105 mm |
| Thickness | 10 mm. 11 mm |
| Inner diameter | 88 mm |
| Function | Seal Ring, drive shaft mounting |
| Weight | 0.080 kg |
| Type | Seal Ring, drive shaft mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.057 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 185 mm |
| Material | Thermoplast |
| Inner diameter 2 | 39 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Inner diameter 1 | 13 mm |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101865)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38760)
£11.78
Important compatibility info
| Weight | 0.31 kg |
| Length | 449 mm |
| Height | 32 mm |
| Width | 120 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Placement on Vehicle | Rear Axle, Wheel Side |
| Weight | 0.198 kg |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 44 mm |
| Inner diameter 1 | 30 mm |
| Length | 77 mm |
| Type | Bellow Kit, drive shaft |
| Bellows Material | Polychloroprene (Neoprene) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (26840)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38763)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Circlip (03196)
£11.78
Important compatibility info
| Length | 71 mm |
| Weight | 0.280 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Height | 43 mm |
| Width | 209 mm |
| Filter type | Pollen Filter |
| Weight | 0.07 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Length | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Length | 261 mm |
| Height | 29 mm |
| Width | 218 mm |
| Weight | 0.190 kg |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.050 kg |
| Height | 125 mm |
| Outer diameter | 53 mm |
| Filter type | Filter Insert |
| Seal Diameter | 58 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.009 kg |
| Width | 15 mm |
| Outer diameter | 21 mm |
| Inner diameter | 15 mm |
| Bearing Type | Needle Bearing |
| Function | Pilot Bearing, clutch |
| Type | Pilot Bearing, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.165 kg |
| Function | Radiator Hose |
| Cooling Hose | from engine to oil cooler and water pump |
| Type | Radiator Hose |
| Hose Length | 133 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.36 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 102 mm |
| Thickness | 76 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information | with lock nut |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Material | Rubber |
| Length | 87 mm |
| Inner diameter 2 | 66 mm |
| Inner diameter 1 | 20 mm |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Weight | 0.279 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100211)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 2x Febi Molybdenum Grease (02582)
£11.78
Important compatibility info
| Length | 125 mm |
| Filter type | Spin-on Filter |
| Function | Air Filter, compressor intake |
| Outer diameter | 78 mm |
| Internal Thread Size | M16 x 1,5 |
| Weight | 0.385 kg |
| Type | Air Filter, compressor intake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 50 mm |
| Weight | 0.090 kg |
| Width | 40 mm |
| Material | Rubber with fabric lining |
| Thickness | 50 mm |
| Outer diameter | 40 mm |
| Inner diameter | 13 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
Important compatibility info
| Weight | 0.44 kg |
| Length | 109 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 78 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (03185)
- 1x Febi Bellow, drive shaft (03596)
- 1x Febi Spring Washer (07254)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi Nut, kingpin (08023)
£11.78
Important compatibility info
| Thickness | 50 mm |
| Inner diameter | 10.4 mm |
| Material | Rubber/Metal |
| Outer diameter | 45.1 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Type | Mounting, control/trailing arm |
| Weight | 0.179 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.78
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023