Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.380 kg |
| Length | 263 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Outer diameter | 10.9 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 140 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| External Thread Size | M10 x 1,25 |
| Weight | 0.21 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Outer diameter | 150 mm |
| Material | MVQ (silicone rubber) |
| Thickness | 12 mm |
| Inner diameter | 127 mm |
| Weight | 0.125 kg |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Weight | 0.33 kg |
| Piston Diameter | 19 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Paired article numbers | 09593 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 100 mm |
| Inner diameter | 10.3 mm |
| Spanner Size | 16 |
| Rod/Strut | Coupling Rod |
| Thread Length | 25 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.304 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Piston Diameter | 20.6 mm |
| Function | Wheel Brake Cylinder |
| Weight | 0.35 kg |
| Type | Wheel Brake Cylinder |
| Paired article numbers | 12390 |
| Material | Grey Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Weight | 0.151 kg |
| for OE number | 03G 121 132 B |
| Function | Coolant Flange |
| Type | Coolant Flange |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Length | 136 mm |
| Height | 35 mm |
| Placement on Vehicle | Front Axle |
| Width | 122 mm |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.37 kg |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Weight | 0.177 kg |
| Length | 1735 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Weight | 0.160 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 470 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Weight | 0.20 kg |
| Length | 108 mm. 7 mm |
| Outer diameter | 15.06 mm |
| Function | Sensor, coolant level |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 24 mm |
| Material | Rubber |
| Length | 100 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08019)
- 1x Febi Clamping Clip (38764)
- 1x Febi Gasket, transfer case (08020)
- 1x Febi Circlip (05336)
- 1x Febi High Temperature Lubricant (03630)
£11.89
Important compatibility info
| Opening Pressure | 1.38 bar |
| Function | Cap, coolant tank |
| for OE number | 163 500 00 06 |
| Weight | 0.050 kg |
| Material | Plastic |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.88
Important compatibility info
| Weight | 0.06 kg |
| Placement on Vehicle | Rear Axle |
| Length | 1135 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.88
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Weight | 0.16 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Steel |
| Spanner Size | 13 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.88
Important compatibility info
| Weight | 0.13 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 98 mm |
| Outer diameter | 38 mm |
| Inner diameter | 10 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.88
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Brake Hose |
| Length | 362 mm |
| Weight | 0.14 kg |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
| Paired article numbers | 30847 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.88
Important compatibility info
| Weight | 0.3 kg |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 34 mm |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.87
Important compatibility info
| Height | 103 mm |
| Outer diameter | 64 mm |
| Gasket inner diameter | 71 mm |
| Inner diameter | 31 mm |
| Filter type | Filter Insert |
| Weight | 0.047 kg |
| Additional Information | with gaskets/seals |
| Gasket outer diameter | 78 mm |
| Function | Oil Filter |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.87
Important compatibility info
| Type | Brake Hose |
| Length | 448 mm |
| Weight | 0.120 kg |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.87
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023