Important compatibility info
| External Thread Size | M12 x 1,75 |
| Internal Thread Size | M14 x 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 9 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 238 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5, M23 x 1,5 |
| Material | Steel |
| Paired article numbers | 27512 |
| Colour | Grey |
| Thread Length | 70 mm. 18 mm |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with banjo bolt |
| External Thread Size | M12 x 1 |
| Internal Thread Size | M10 x 1 |
| Length | 200 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air Filter |
| Function | Air Filter |
| Length | 285 mm |
| Height | 70 mm |
| Width | 233 mm |
| Filter type | Filter Insert |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Piston Diameter | 20.6 mm |
| Material | Cast Iron |
| Paired article numbers | 102863 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M24 x 1,5 |
| Height | 146 mm |
| Outer diameter | 97 mm |
| Filter type | Spin-on Filter, with water drain screw |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 34.5 mm |
| Thickness | 40 mm |
| Inner diameter | 14.2 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Type | Gasket, exhaust manifold |
| Length | 119 mm |
| Width | 90 mm |
| Function | Gasket, exhaust manifold |
| Thickness | 1.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 12 V |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Inner diameter | 14 mm |
| Colour Coding | Green |
| Replaces | 08307 |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 37 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (08298)
- 1x Febi Rolling Bearing, suspension strut support mount (12594)
Important compatibility info
| Length | 109 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 78 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (03185)
- 1x Febi Bellow, drive shaft (03596)
- 1x Febi Spring Washer (07254)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi Nut, kingpin (08023)
Important compatibility info
| Paired article numbers | 14184 |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 140 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | 21801 |
| Rod/Strut | Coupling Rod |
| Length | 230 mm |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22422)
- 2x Febi Nut (22263)
Important compatibility info
| Material | Polychloroprene (Neoprene) |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 44 mm |
| Inner diameter 1 | 30 mm |
| Length | 77 mm |
| Type | Bellow Kit, drive shaft |
| Bellows Material | Polychloroprene (Neoprene) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (26840)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38763)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Circlip (03196)
Important compatibility info
| Paired article numbers | 17008 |
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Replaces | 18496; 19346 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 71 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 112 mm |
| Paired article numbers | 30724 |
| Surface | Zinc-coated |
| DIN / ISO | 985 |
| Function | Tie Rod End |
| Internal Thread Size | M18 x 1,5 |
| External Thread Size | M14 x 2 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 72 mm |
| Material | Rubber/Metal |
| Outer diameter | 45 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















