Important compatibility info
Weight | 19.795 kg |
Wishbone Angle Measurement | 49 ° |
Function | Control/Trailing Arm, wheel suspension |
Bolt Hole Circle Diameter | 25 mm |
Steering arm type | Triangular Control Arm (CV) |
Outer diameter | 48 mm |
Placement on Vehicle | Rear Axle |
Type | Control/Trailing Arm, wheel suspension |
for OE number | 942 350 18 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.021 kg |
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Rear Axle Left, outer, Rear Axle Right |
Thickness | 12 mm |
Spanner Size | 19 |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10 |
Function | Nut |
Surface | Zink flake coated |
Type | Nut |
Outer diameter | 27.5 mm |
Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 18 mm |
Housing length | 327.5 mm |
Weight | 0.335 kg |
Placement on Vehicle | both sides |
Length | 537 mm |
Housing Diameter | 19 mm |
Eject Force | 670 N |
Stroke | 180 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.335 kg |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Thickness | 70 mm |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 38 mm |
Outer diameter | 203.2 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 6 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Weight | 1.498 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M22 x 1,5 |
Weight | 0.081 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Material | Steel |
Outer diameter | 36 mm |
Thickness | 22 mm |
Spanner Size | 30 |
Surface | Phosphatized |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10 |
DIN / ISO | 74361 |
Bolt / Nut Version | Countersunk Head |
Wheel Fastening | Flat Seat |
Type | Wheel Nut |
Function | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.167 kg |
Number of Connectors / Ports | 2 |
Function | Ignition Coil |
Type | Ignition Coil |
for OE number | 27301-2B100 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 64 mm |
Parameter | 6PK + 5PK |
Type | Belt Pulley, crankshaft |
Weight | 2.138 kg |
Function | Belt Pulley, crankshaft |
Outer diameter | 166 mm |
Inner diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Number of Connectors / Ports | 3 |
Material | Plastic |
Water pump impeller material | Plastic |
Voltage | 12 V |
Weight | 0.31 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.070 kg |
Function | Coolant Flange |
Placement on Vehicle | Cylinder Head, transmission sided |
Additional Information | with gasket/seal |
Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 249 mm |
Width | 114.5 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 28 mm |
Type | Brake Pad Set, disc brake |
Weight | 11.382 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 14 mm. 25 mm |
Function | Shock Absorber, driver cab suspension |
Max. Length | 346 mm |
Min. Length | 252 mm |
Weight | 3.6 kg |
Placement on Vehicle | Front |
Pipe Diameter | 63 mm. 38 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Mechanical |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.650 kg |
Function | Water Pump, engine cooling |
Number of Wings | 5 |
Number of grooves | 8 |
Seal Material | Paper |
Water pump impeller material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.092 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 46 mm |
Width | 44 mm |
Material | Rubber/Metal |
Thickness | 46 mm |
Inner diameter | 19.5 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.138 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1460 Ohm |
Cable Length | 1075 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Paired article numbers | 174641 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.840 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Right |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 52049744 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Bolt Hole Circle Diameter | 86 mm |
External Teeth, Wheel Side | 27 |
Bore Diameter | 10.3 mm |
Number of mounting bores | 6 |
Thread Size | M24x1,5 |
Paired article numbers | 181694 |
Function | Drive Shaft |
Type | Drive Shaft |
Additional Information 2 | with nut |
Transmission-side joint diameter | 102 mm |
Min. Length | 665 mm |
ABS Ring Diameter | 83 mm |
Wheel Sided Joint Diameter | 83 mm |
Weight | 6.044 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Track rollers material | Plastic |
Outer diameter | 75 mm |
Operating Mode | Mechanical |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Weight | 1.5 kg |
Width of castor bearing surface | 33 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.870 kg |
Outer diameter | 302 mm |
Inner diameter | 191 mm |
Filter type | Filter Insert |
Function | Air Filter |
Height | 475 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Ignition Switch |
Function | Ignition Switch |
Extra Description | febi Plus |
Colour | Black |
Number of Connectors / Ports | 7 |
Weight | 0.053 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023