Proud to be a UK-based company
Contact us
Important compatibility info
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.45
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Shore-A hardness value, base body | 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.45
Important compatibility info
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M22 x 1,5, M16 x 2, M12 x 1,75 |
| Rolling piston material | Steel |
| Thickness | 312 mm. 600 mm |
| Outer diameter | 311 mm. 250 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.45
Important compatibility info
| Operating pressure to | 8 bar |
| Pulleys | with belt pulley |
| for OE number | 49110-3X01A |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Outer diameter | 17 mm |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.43
Important compatibility info
| Combi Switch Function | with indicator function, with wipe-wash function, with wipe interval function, with high beam function, with hazard warning light function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.42
Important compatibility info
| Placement on Vehicle | Upper, Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.42
Important compatibility info
| Min. Length | 503 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Max. Length | 853 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Mounting points diameter | 16 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20172 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.42
Important compatibility info
| Function | Water Pump, engine cooling |
| Seal Material | Paper, Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.37
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2.2 kW |
| for OE number | 02Z 911 024 HX |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.34
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Inner diameter | 18 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.33
Important compatibility info
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.31
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 75 A |
| Belt Pulley Diameter | 55 mm |
| Current Strength | 75 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.28
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 258 mm. 226 mm |
| Thickness | 157 mm. 474 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M22 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.12
Important compatibility info
| Mounting points diameter | 18 mm |
| for OE number | 2 311 126 |
| Type | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Function | Hydraulic Pump, steering |
| Inner diameter | 16 mm. 18 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Operating pressure to | 12 bar |
| Number of mounting bores | 3 |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.07
Important compatibility info
| Placement on Vehicle | both sides |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.02
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1595 mm |
| Rod/Strut | Push Rod |
| Cone Size | 27 mm |
| Pipe Diameter | 40 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.02
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Function | Brake Drum |
| Placement on Vehicle | Rear Axle |
| Width | 42.8 mm |
| Outer diameter | 245 mm |
| Thickness | 71.5 mm |
| Centering Diameter | 49.4 mm |
| Additional Information 2 | with wheel bearing |
| Inner diameter | 203 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Max.skimmed drum measure | 204.5 mm |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.02
Important compatibility info
| External Teeth, Diff.Side | 26 |
| External Teeth, Wheel Side | 25 |
| Min. Length | 642 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.00
Important compatibility info
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Length | 2028 mm |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.96
Important compatibility info
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.96
Important compatibility info
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Placement on Vehicle | Front Axle |
| Outer diameter | 225 mm. 258 mm |
| Thickness | 500 mm. 210 mm |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.96
Important compatibility info
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 615 mm |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.96
Important compatibility info
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 96 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45953)
- 1x Febi Tensioner, timing chain (46275)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
- 1x Febi Guide, timing chain (49690)
£125.96
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 199589 |
| Number of Connectors / Ports | 2. 7 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.94
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 199587 |
| Number of Connectors / Ports | 7. 2 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.94
Important compatibility info
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Mounting points diameter | 20 mm |
| Max. Length | 624 mm |
| Min. Length | 394 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M12 x 1,75 |
| Pipe Diameter | 60 mm. 50 mm |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.93
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Additional Information | with piston rod, with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm. 187 mm |
| Thickness | 412 mm. 210 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.93
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 614 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.92
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 92 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.88
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 81 mm |
| External Teeth, Wheel Side | 31 |
| Function | Drive Shaft |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 89 mm |
| Min. Length | 840 mm |
| External Teeth, Diff.Side | 27 |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.88
Important compatibility info
| Function | Chain Kit, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Extra Description | Standard Medium Kit |
| Operating Mode | Hydraulic |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 102 |
| Timing Chain Size | G44HCF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.82
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 104.5 mm |
| Additional Information 2 | with wheel bearing, with ABS sensor ring |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.82
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Width | 124 mm |
| Material | Aluminium |
| Outer diameter | 55 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.71
Important compatibility info
| Piston conrod diameter | 16 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 474 mm |
| Min. Length | 287 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.55
Important compatibility info
| Type | Mounting, engine |
| Number of Connectors / Ports | 1 |
| Placement on Vehicle | Upper Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Pipe Diameter | 60 mm |
| Function | Centre Rod Assembly |
| Cone Size | 31.5 mm |
| Placement on Vehicle | Front Axle, from 1st to 2nd intermediate steering lever |
| Length | 1779 mm |
| Rod/Strut | Push Rod |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 142 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Additional Information | with crankshaft gear |
| Replaces | 33846 |
| for OE number | 11 34 8 649 768 S3 |
| Additional Information 2 | with bolts/screws |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29868)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29536)
- 1x Febi Guide, timing chain (29537)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£125.46
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
| Number of screws | 18 |
| for OE number | 51.03905.0177 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Housing length | 291.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Stroke | 214 mm |
| Eject Force | 470 N |
| Housing Diameter | 18 mm |
| Length | 537 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| External Teeth, Diff.Side | 25 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 24 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Transmission-side joint diameter | 72.4 mm |
| Wheel Sided Joint Diameter | 68.8 mm |
| Min. Length | 600 mm |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Voltage | 24 V |
| Control Range | 0,7+0,5 bar |
| Type | Air Dryer, compressed-air system |
| Rated Power | 100 W |
| Function | Air Dryer, compressed-air system |
| Cut-off Pressure | 8,5 bar |
| Additional Information 2 | with integrated oil separator, with dryer |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Width of castor bearing surface | 28 mm |
| Outer diameter | 52 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 41756 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Number of mounting bores | 4 |
| Function | Central Slave Cylinder, clutch |
| Fill Medium | Mineral Oil |
| Type | Central Slave Cylinder, clutch |
| Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 15694 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 120 mm |
| Thickness | 36 mm |
| Outer diameter | 159 mm |
| Placement on Vehicle | Front |
| Additional Information | with nuts, with bush |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.37
Important compatibility info
| Pipe Diameter | 52 mm. 60 mm |
| Piston conrod diameter | 16 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 602 mm |
| Min. Length | 362 mm |
| Function | Shock Absorber |
| Replaces | 20164 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.31
Important compatibility info
| Type | Oil Pump |
| Internal Thread Size | M6 x 1 |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.31
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 984 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 60 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.29
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023