Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M22 x 1,5, M16 x 2, M12 x 1,75 |
| Rolling piston material | Steel |
| Thickness | 312 mm. 600 mm |
| Outer diameter | 311 mm. 250 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.75
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Width | 124 mm |
| Material | Aluminium |
| Outer diameter | 55 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.71
Important compatibility info
| for OE number | 23897050 |
| Operating Mode | Electronic |
| Function | Accelerator Pedal |
| Type | Accelerator Pedal |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.62
Important compatibility info
| Piston conrod diameter | 16 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 474 mm |
| Min. Length | 287 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.55
Important compatibility info
| Hole Spacing | 125 mm |
| Placement on Vehicle | Rear Axle |
| Length | 496 mm |
| Steering arm type | Control Arm |
| Bore Diameter | 14 mm |
| Pipe Diameter | 58 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.53
Important compatibility info
| Belts | with rounded tooth profile |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Number of Teeth | 153 |
| Type | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28107)
- 1x Febi Water Pump, engine cooling (21877)
£125.47
Important compatibility info
| Type | Mounting, engine |
| Number of Connectors / Ports | 1 |
| Placement on Vehicle | Upper Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 142 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Additional Information | with crankshaft gear |
| Replaces | 33846 |
| for OE number | 11 34 8 649 768 S3 |
| Additional Information 2 | with bolts/screws |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29868)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29536)
- 1x Febi Guide, timing chain (29537)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£125.46
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
| Number of screws | 18 |
| for OE number | 51.03905.0177 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Housing length | 291.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Stroke | 214 mm |
| Eject Force | 470 N |
| Housing Diameter | 18 mm |
| Length | 537 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| External Teeth, Diff.Side | 25 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 24 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Transmission-side joint diameter | 72.4 mm |
| Wheel Sided Joint Diameter | 68.8 mm |
| Min. Length | 600 mm |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Voltage | 24 V |
| Control Range | 0,7+0,5 bar |
| Type | Air Dryer, compressed-air system |
| Rated Power | 100 W |
| Function | Air Dryer, compressed-air system |
| Cut-off Pressure | 8,5 bar |
| Additional Information 2 | with integrated oil separator, with dryer |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Width of castor bearing surface | 28 mm |
| Outer diameter | 52 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 41756 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Number of mounting bores | 4 |
| Function | Central Slave Cylinder, clutch |
| Fill Medium | Mineral Oil |
| Type | Central Slave Cylinder, clutch |
| Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 15694 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Length | 2028 mm |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.38
Important compatibility info
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 120 mm |
| Thickness | 36 mm |
| Outer diameter | 159 mm |
| Placement on Vehicle | Front |
| Additional Information | with nuts, with bush |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.37
Important compatibility info
| Piston conrod diameter | 16 mm |
| Max. Length | 730 mm |
| Min. Length | 439 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.36
Important compatibility info
| Type | Oil Pump |
| Internal Thread Size | M6 x 1 |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.34
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023