Important compatibility info
| Thickness | 65 mm |
| Length | 87 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 16 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information 2 | with washers |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1613 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, wheel hub |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (15551)
- 1x Febi Seal Ring, wheel hub (06763)
- 1x Febi Circlip (06761)
Important compatibility info
| Height | 143 mm |
| Filter type | Spin-on Filter |
| Function | Fuel filter |
| Outer diameter | 95 mm |
| Internal Thread Size | M16 x 1,5 |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 240 mm |
| Height | 31 mm |
| Width | 204 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 147 mm |
| Outer diameter | 58 mm |
| Inner diameter | 27 mm |
| Filter type | Filter Insert |
| Seal Diameter | 62.5 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Wheel Brake Cylinder |
| Paired article numbers | 108024 |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 106470 |
| Number of Connectors / Ports | 2 |
| Cable Length | 780 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 67 mm |
| Opening Temperature | 80 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Flange |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 197533 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 29 |
| Number of Connectors / Ports | 3 |
| Connector Shape | Rectangular |
| Colour Coding | Black |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
| Switching temperature range 1 from | 95 °C |
| Switching temperature range 1 to | 84 °C |
| Switching temperature range 2 from | 102 °C |
| Switching temperature range 2 to | 92 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 255 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,25, M38 x 1,5 |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Upper, Rear, inner, Outer |
| Outer diameter | 48 mm. 25 mm |
| Thickness | 48 mm |
| Inner diameter | 20 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 2 | 69 mm |
| Inner diameter 1 | 19 mm |
| Material | Rubber |
| Length | 94 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03376)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Additional Information 2 | with pre-filter |
| Width | 231 mm |
| Height | 46 mm |
| Length | 350 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake System | ATE |
| Placement on Vehicle | Rear Axle |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake System | ATE |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5, M12 x 1,5 |
| Function | Tie Rod End |
| Thread Type | with left-hand thread |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 02290 |
| Length | 90 mm |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















