Important compatibility info
| Function | Valve Guide |
| Type | Valve Guide |
| Valve type | for exhaust valves |
| Paired article numbers | 177904 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 147 mm |
| Filter type | Pollen Filter |
| Length | 212 mm |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Height | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Function | Bellow Kit, steering |
| Length | 181 mm |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 55 mm |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Rear, Centre |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Outer diameter | 37.2 mm |
| Thickness | 40 mm |
| Inner diameter | 10.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 200 mm |
| Height | 46 mm |
| Length | 294 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 1 | 13 mm |
| Inner diameter 2 | 60 mm |
| Material | Thermoplastic polyester elastomer |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Length | 196 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Length | 101 mm |
| Width | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear, Lower |
| Length | 85 mm |
| Material | Rubber/Metal |
| Outer diameter | 45 mm |
| Inner diameter | 12.2 mm |
| Type | Bushing, leaf spring |
| Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 40 mm |
| Width | 40 mm |
| Material | Rubber |
| Thickness | 74 mm |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 10659 |
| Function | Tie Rod End |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M10 x 1,25, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 89 mm |
| Material | Steel |
| Paired article numbers | 28052 |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 9 mm |
| Colour | black |
| Placement on Vehicle | Rear Axle Right |
| Surface | Painted |
| Additional Information | with nuts |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 89 mm |
| Material | Steel |
| Paired article numbers | 28051 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left |
| Surface | Painted |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Pipe Diameter | 9 mm |
| Additional Information | with nuts |
| Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Right Front |
| Material | Rubber/Metal |
| Outer diameter | 74 mm |
| Thickness | 46 mm |
| Paired article numbers | 15785 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 91 mm |
| Thickness | 72 mm |
| Spanner Size | 17 |
| Function | Tie Rod End |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Filter |
| Inner diameter | 29 mm |
| Filter type | Filter Insert |
| Seal Diameter | 81 mm |
| Type | Oil Filter |
| Additional Information 2 | with seal ring |
| Height | 200 mm |
| Outer diameter | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Function | Coolant Flange |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 88 mm |
| Material | Rubber |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 92 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (07997)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (07995)
- 1x Febi Spring Washer (07253)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Length | 104 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | painted |
| Pipe Diameter | 9 mm |
| Placement on Vehicle | Front Axle Left |
| Length | 80 mm |
| Material | Steel |
| Paired article numbers | 28053 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Colour | black |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 17 |
| Thread Length | 23 mm |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Seal, timing chain tensioner |
| Type | Seal, timing chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 12660 |
| External Thread Size | M12 x 1,5 |
| Function | Ball Joint |
| Cone Size | 15 mm |
| Mounting points diameter | 8.1 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 138 mm |
| Colour | Blue |
| Bolt Head/Nut Design | External Hexagon |
| Function | Camber Correction Screw |
| External Thread Size | M14 x 1,5 |
| for OE number | 210 330 00 18 |
| Type | Camber Correction Screw |
| Surface | Zink flake coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting and Bolting Kit, control/trailing arm (07759)
- 2x Febi Washer (07755)
- 1x Febi Nut (07757)
Important compatibility info
| Placement on Vehicle | Outer, Front Axle Left, Front Axle Right |
| Length | 73 mm |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| Outer diameter | 37 mm. 23 mm |
| Thickness | 50 mm |
| Inner diameter | 10 mm |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Paired article numbers | 15432 |
| Colour | Black |
| Function | Exterior Door Handle |
| Type | Exterior Door Handle |
| Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Membrane, vacuum pump |
| Type | Membrane, vacuum pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, at brake caliper |
| Length | 485 mm |
| Spanner Size | 14, 17 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 50 mm |
| Diameter 1 | 37 mm |
| Diameter 2 | 67 mm |
| Opening Temperature | 71 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Material | Plastic |
| Placement on Vehicle | Left |
| Paired article numbers | 15434 |
| Function | Exterior Door Handle |
| Type | Exterior Door Handle |
| Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023




























