Important compatibility info
| Length | 61.7 mm |
| Width | 56.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Thickness/Strength 1 | 15 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belts | with rounded tooth profile |
| Width | 26 mm |
| Number of Teeth | 124 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (17220)
- 1x Febi Tensioner Pulley, timing belt (24767)
Important compatibility info
| Function | Shaft Seal, wheel hub |
| Inner diameter | 51.5 mm |
| Outer diameter | 100 mm |
| Material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Shaft Seal, wheel hub |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (32302)
- 1x Febi Gasket, oil pump (36341)
Important compatibility info
| Thickness | 44 mm |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Paired article numbers | 47571 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (40171)
- 1x Febi Screw (27388)
- 1x Febi Nut (14392)
- 3x Febi Clamping Bolt, ball joint (07866)
- 1x Febi Nut (38209)
- 1x Febi Rolling Bearing, suspension strut support mount (44799)
- 2x Febi Nut (103239)
Important compatibility info
| Material | FPM (fluoride rubber) |
| Outer diameter | 48 mm |
| Thickness | 7 mm |
| Inner diameter | 41 mm |
| Type | Gasket, oil pump |
| Function | Gasket, oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.5 mm |
| Width | 74 mm |
| Length | 97 mm |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | incl. wear warning contact |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 1055 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Pump, fuel pre-supply |
| Length | 125 mm |
| Width | 90 mm |
| Thickness | 95 mm |
| Inner diameter | 31 mm |
| Number of Holes | 3 |
| Bolt Hole Circle Diameter | 6 mm |
| Internal Thread Size | 2 x M12 x 1,5 |
| Type | Pump, fuel pre-supply |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 105.3 mm |
| Valve seat angle | 45 ° |
| Valve stem diameter | 6 mm |
| Valve head diameter | 30.5 mm |
| Function | Intake Valve |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 670 mm |
| Paired article numbers | 44335 |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, v-ribbed belt tensioner |
| Type | Repair Kit, v-ribbed belt tensioner |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Stub Shaft, differential |
| Function | Stub Shaft, differential |
| Additional Information 2 | with screw |
| Placement on Vehicle | transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stub Shaft, differential (39890)
- 1x Febi Screw (45930)
Important compatibility info
| Inner diameter | 13 mm |
| Number of Teeth | 42 |
| Function | Camshaft Adjuster |
| for OE number | 11 36 7 534 718 |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side, Right, for cylinder 1-4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Spring Steel |
| Length | 107 mm |
| Mounting points diameter | 11 mm |
| Charge Type | Exhaust Turbocharger |
| Type | Gasket, charger |
| Function | Gasket, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 200 mm |
| Length | 516 mm |
| Thickness | 11 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 284 mm |
| Height | 61 mm |
| Width | 232 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 135 mm |
| Height | 182 mm |
| Width | 115 mm |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
| Filter type | In-Line Filter, with water separator |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Number of Holes | 4 |
| Inner diameter | 24.6 mm |
| Thickness | 71 mm |
| Outer diameter | 119.8 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 71 mm |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without seal ring |
| Bolt Head/Nut Design | Hexagon Socket |
| Surface | Phosphatized |
| Spanner Size | 19 |
| Length | 57 mm |
| Screw length below head | 40 mm |
| External Thread Size | M24 x 2 |
| Outer diameter | 40 mm |
| Function | Screw Plug, oil sump |
| Type | Screw Plug, oil sump |
| Thread Length | 35 mm |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Thickness | 2 mm |
| Inner diameter | 109 mm |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 139.4 mm |
| Width | 92.3 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.7 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Length | 131 mm |
| Width | 62.3 mm |
| Wear Warning Contact | incl. wear warning contact |
| Thickness/Strength 1 | 17.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 314 mm |
| Height | 72 mm |
| Width | 258 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 258 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Material | Steel |
| Paired article numbers | 170549 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with pre-filter |
| Width | 155 mm |
| Height | 44 mm |
| Length | 267 mm |
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 37 mm |
| Outer diameter | 200 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3 mm |
| Type | Brake Shoe Set, parking brake |
| Function | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Width | 78 mm. 69 mm |
| Length | 175 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 19.4 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 11 mm |
| Material | ACM (Polyacrylate) |
| Outer diameter | 95 mm |
| Inner diameter | 76 mm |
| Function | Gasket, timing case cover |
| Type | Gasket, timing case cover |
| for OE number | 06H 103 483 D |
| Shape/Form | round |
| Placement on Vehicle | frontal sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Additional Information | with fuel sender unit |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 176709 |
| Placement on Vehicle | Intake Side, Right |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Number of Teeth | 39 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 108 mm |
| Outer diameter | 83 mm |
| Function | Oil Filter |
| Inner diameter | 28 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1 004 297 S4 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Width | 22 mm |
| Number of Teeth | 117 |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (29958)
- 1x Febi Water Pump, engine cooling (39114)
Important compatibility info
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Filter type | Pollen Filter |
| Width | 190 mm |
| Height | 34 mm |
| Length | 198 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Paired article numbers | 176727 |
| Placement on Vehicle | Intake Side, Left |
| Number of Teeth | 33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 347 mm |
| Height | 58 mm |
| Width | 162 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Centre, Rear Axle Right |
| Material | Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 219 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sealing Set, air compressor |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 46 |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| for OE number | 25203205 |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Seal Material | Metal, NBR (nitrile butadiene rubber) |
| Additional Information | with gasket/seal |
| Additional Information 2 | non-switchable water pump |
| Type | Water Pump, engine cooling |
| Number of Wings | 9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 104.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Length | 185.6 mm |
| Placement on Vehicle | Front Axle |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 2 139 829 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































