Important compatibility info
Inner diameter | 173 mm |
Placement on Vehicle | at brake caliper |
Height | 225 mm |
Additional Information | with fastening/mounting material |
Outer diameter | 445 mm |
Weight | 0.47 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Placement on Vehicle | Left |
Length | 205 mm |
Width | 585 mm |
Material | NBR (nitrile butadiene rubber) |
Thickness | 40 mm |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.183 kg |
Joint Type | Tripod Joint |
Placement on Vehicle | Front Axle, transmission sided |
Length | 102 mm |
Material | Thermoplast |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 68 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173235)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 2.56 kg |
Placement on Vehicle | Rear Axle |
Width | 40 mm |
Outer diameter | 228 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 22.2 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.250 kg |
Width | 30 mm |
Belts | with rounded tooth profile |
Number of Teeth | 150 |
Surface | Coated |
Type | Timing Belt Kit |
Function | Timing Belt Kit |
Units / Pulleys | incl. hydraulic belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (31725)
- 1x Febi Tensioner, timing belt (34610)
- 1x Febi Tensioner Pulley, timing belt (27004)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26982)
Important compatibility info
Weight | 0.041 kg |
Length | 806 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 3 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Additional Information 2 | Requires special tools for mounting |
Chemical Properties | Elastic |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.067 kg |
Placement on Vehicle | Front Axle |
Material | PU (Polyurethane) |
Inner diameter | 22 mm |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Width | 54 mm |
Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 95 mm |
Operating Mode | Mechanical |
Number of Connectors / Ports | 2 |
Function | Fuel Pump |
Internal Thread Size | M16 x 1,5 |
Type | Fuel Pump |
Weight | 1.575 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 148 mm |
Paired article numbers | 39253 |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left |
Weight | 3.1 kg |
Cone Size | 30 mm |
Pipe Diameter | 32 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Material | Plastic |
Opening Pressure | 1 bar |
for OE number | 1399 820 |
Type | Cap, coolant tank |
Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts, with rubber mounts |
Weight | 3.31 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 40572 |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Placement on Vehicle | Left Rear, Lower |
Material | Cast Steel |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36328)
- 1x Febi Bolt, control arm (37661)
- 1x Febi Bolt, control arm (37638)
- 2x Febi Nut (37412)
Important compatibility info
Paired article numbers | 176903 |
Placement on Vehicle | Front Axle Right |
Function | Tie Rod |
Type | Tie Rod |
Weight | 1.052 kg |
Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (172723)
- 1x Febi Inner Tie Rod (172729)
Important compatibility info
Length | 252 mm |
Height | 60 mm |
Width | 204 mm |
Filter type | Filter Insert |
Weight | 0.65 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Function | Repair Kit, gear shift lever |
Type | Repair Kit, gear shift lever |
Placement on Vehicle | at gearshift linkage |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 134 |
Function | Timing Belt Kit |
Belts | with rounded tooth profile |
Width | 25.4 mm |
Weight | 0.900 kg |
Track rollers material | Plastic |
Type | Timing Belt Kit |
Additional Information | with fastening/mounting material |
Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11197)
- 1x Febi Tensioner Pulley, timing belt (26715)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26716)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178792)
Important compatibility info
Weight | 0.43 kg |
Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
Function | Fuel filter |
Additional Information 2 | with seal ring |
Height | 128 mm |
Pipe Diameter | 8 mm |
Type | Fuel filter |
Outer diameter | 103 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 142 |
Function | Timing Chain |
Chain Type | Simplex, Closed chain |
Weight | 0.290 kg |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 308 mm |
Thickness | 65 mm |
Brake Disc Thickness | 20 mm |
Minimum thickness | 18 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Number of mounting bores | 5 |
Function | Brake Disc |
Weight | 7.3 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Hole Spacing | 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Weight | 0.23 kg |
Placement on Vehicle | Front Axle Left |
Length | 70 mm |
Material | Steel |
Spanner Size | 17 |
Paired article numbers | 42096 |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Centering Diameter | 56 mm |
Surface | Oiled |
Minimum thickness | 7 mm |
Bolt Hole Circle Diameter | 108 mm |
Thickness | 69.2 mm |
Brake Disc Thickness | 9 mm |
Placement on Vehicle | Rear Axle |
Outer diameter | 248 mm |
Rim Hole Number | 4 -Hole |
Weight | 5.56 kg |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information 2 | with ABS sensor ring, with grease cap |
Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.319 kg |
Number of Connectors / Ports | 2 |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 9.62 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 300 mm |
Thickness | 73.6 mm |
Brake Disc Thickness | 32 mm |
Minimum thickness | 29.9 mm |
Bolt Hole Circle Diameter | 130 mm |
Centering Diameter | 80 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fulfils ECE norm | R37 |
Function | Bulb / Bulb, clearance/end outline marker light / Bulb, licence plate light / Bulb, park/position light / Bulb, position/end outline marker light |
Type | Bulb / Bulb, clearance/end outline marker light / Bulb, licence plate light / Bulb, park/position light / Bulb, position/end outline marker light |
Weight | 0.006 kg |
Rated Power | 10 W |
Bulb Type | R10W, Ball-shaped lamp |
Voltage | 24 V |
Base design light bulb | BA15s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.643 kg |
Type | Mounting, engine |
for OE number | 357 199 279 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Activated Carbon Filter |
Function | Filter Set, cabin air |
Weight | 0.198 kg |
Type | Filter Set, cabin air |
Length | 216.5 mm |
Height | 22 mm |
Width | 119 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.286 kg |
Function | Tie Rod End |
Length | 60 mm |
Additional Information 2 | with nut |
Spanner Size | 19 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.67 kg |
Placement on Vehicle | Rear |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 3C0 199 855 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.217 kg |
Function | Hose, air supply |
Extra Description | febi Plus |
Type | Hose, air supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Function | EGR Valve |
Weight | 0.97 kg |
Type | EGR Valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 2631 mm |
Weight | 0.290 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023