Important compatibility info
External Thread Size | M10 x 1,5 |
Operating Mode | Manual |
Driver Position | for right-hand drive vehicles |
Number of Connectors / Ports | 3 |
Function | Tilt Pump, driver cab |
Weight | 2.4 kg |
Suction side external thread size | M12 x 1,5 |
Pressure side external thread size | M14 x 1,5 |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.003 kg |
Material | ACM (Polyacrylate) |
Type | Gasket, vacuum pump |
Function | Gasket, vacuum pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 188 mm |
Width | 73.6 mm. 73 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Cable Length | 305 mm |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Weight | 2.817 kg |
Type | Brake Pad Set, disc brake |
Replaces | 116078 |
Additional Information 2 | with piston clip, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.557 kg |
Ignition Coil | 2 Spark |
Function | Ignition Coil |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 83 mm |
Inner diameter | 14 mm |
Height | 146 mm |
Function | Fuel filter |
Filter type | Filter Insert |
Type | Fuel filter |
Weight | 0.320 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M30 x 1,5 |
External Thread Size | M24 x 1,5 |
Additional Information | with lock nut |
Weight | 7.45 kg |
Length | 895 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 22443-2B800 |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Material | ACM (Polyacrylate) |
Weight | 0.006 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.262 kg |
Placement on Vehicle | Front |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | Mount, exhaust system |
Function | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.925 kg |
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Outer diameter | 164 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 19.1 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.128 kg |
Outer diameter | 95 mm |
Inner diameter | 31 mm |
Type | Bushing, leaf spring |
Function | Bushing, leaf spring |
Material | Rubber/Metal |
Length | 92 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.53 kg |
Number of Chain Links | 76 |
Timing Chain Size | G67HP, G67HR |
Chain Type | Simplex, Closed chain |
Placement on Vehicle | Lower |
Function | Timing Chain |
Type | Timing Chain |
Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.1 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thickness | 70 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 98 mm |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.31 kg |
Placement on Vehicle | Right Rear, Lower |
Material | Cast Steel |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Paired article numbers | 40571 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36329)
- 1x Febi Bolt, control arm (37661)
- 1x Febi Bolt, control arm (37638)
- 2x Febi Nut (37412)
Important compatibility info
Placement on Vehicle | Front, Centre |
Length | 1836 mm |
Weight | 0.311 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.370 kg |
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Front Axle |
Inner diameter | 12 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (12064)
- 2x Febi Bushing, stabiliser coupling rod (12065)
Important compatibility info
Filter type | Filter Insert |
Length | 35 mm |
Type | Urea Filter |
Weight | 0.001 kg |
Outer diameter | 6.6 mm |
Inner diameter | 1.8 mm |
Function | Urea Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Width | 145 mm |
Height | 54 mm |
Length | 258 mm |
Function | Air Filter |
Type | Air Filter |
Weight | 0.23 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 42 mm |
Thickness | 70 mm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Weight | 0.33 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 200 mm |
Filter type | Pollen Filter |
Weight | 0.07 kg |
Type | Filter, cabin air |
Function | Filter, cabin air |
Length | 215 mm |
Height | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Stop Light Switch |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Weight | 0.015 kg |
Type | Stop Light Switch |
Additional Information | with pressure plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023