Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 36 |
| Weight | 5.000 kg |
| Min. Length | 546 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 107.7 mm |
| Type | Drive Shaft |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | Oil Cooler, engine oil |
| Weight | 0.551 kg |
| Type | Oil Cooler, engine oil |
| Height | 43 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (105939)
- 1x Febi Gasket Set, oil cooler (105944)
£40.01
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 87 mm |
| Weight | 0.085 kg |
| Joint Type | CV Joint |
| Length | 126 mm |
| Material | Thermoplastic polyester elastomer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184713)
- 1x Febi Molybdenum Grease (02582)
£27.56
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Length | 265.5 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.76 kg |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Function | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 1.85 kg |
| Type | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Height | 353 mm |
| Outer diameter | 282 mm. 345 mm |
| Inner diameter | 127 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Weight | 3.73 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.68
Important compatibility info
| Colour | Grey |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Weight | 0.029 kg |
| Type | Sensor, coolant temperature |
| for OE number | 1 802 332 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.66
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.875 kg |
| Type | Hydraulic Hose, steering |
| Function | Hydraulic Hose, steering |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Weight | 0.750 kg |
| Length | 538.5 mm |
| Outer diameter | 38 mm. 8 mm. 23 mm |
| Colour | Black |
| Eject Force | 800 N |
| Stroke | 208.5 mm |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.10
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Additional Information | with rubber-metal mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179987 |
| Weight | 4.55 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Brake caliper piston diameter | 54 mm |
| Paired article numbers | 185996 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Weight | 4.3 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.92
Important compatibility info
| Weight | 0.1 kg |
| Hose Length | 240 mm |
| Outer diameter | 30 mm |
| Inner diameter | 21 mm |
| Colour | Black |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 942 506 32 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.09
Important compatibility info
| Weight | 0.06 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Repair Kit, brake caliper |
| Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.30
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 61 mm |
| Outer diameter | 82 mm |
| Weight | 3.445 kg |
| Outer diameter 1 | 64 mm |
| Outer diameter 2 | 152 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.94
Important compatibility info
| Function | Door Check |
| Mounting points diameter | 11 mm |
| Type | Door Check |
| Weight | 0.56 kg |
| Length | 172 mm |
| Placement on Vehicle | Left |
| Mounting bores distance | 107 mm. 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.43
Important compatibility info
| Weight | 0.314 kg |
| Length | 300 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M12 x 1,5 |
| Width | 25 mm |
| Thickness | 64 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 27 mm |
| Material | Plastic |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.52
Important compatibility info
| Weight | 0.212 kg |
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 2 |
| Cable Length | 950 mm |
| Function | Sensor, wheel speed |
| Paired article numbers | 174803 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.50
Important compatibility info
| Function | Oil Pressure Switch |
| Switch point from | 0.3 bar |
| Switch point to | 0.6 bar |
| Length | 53 mm |
| Spanner Size | 24 |
| Number of Connectors / Ports | 2 |
| Shifting Points | 3 bar |
| External Thread Size | M10 x 1 |
| Housing Colour | Green |
| Weight | 0.034 kg |
| Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.17
Important compatibility info
| Length | 221 mm |
| Height | 83 mm |
| Width | 175 mm |
| Additional Information 2 | with oil sump gasket |
| Weight | 0.39 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.83
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178187 |
| Weight | 4.6 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.42
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake caliper piston diameter | 44 mm |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 4.981 kg |
| Paired article numbers | 180306 |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.54
Important compatibility info
| Type | Brake Hose |
| Function | Brake Hose |
| Weight | 0.120 kg |
| Length | 502 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.32
Important compatibility info
| Weight | 0.5 kg |
| Placement on Vehicle | Upper, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1K0 199 867 Q S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, engine mounting system (22766)
- 1x Febi Holder, engine mounting system (22762)
£28.55
Important compatibility info
| Weight | 0.69 kg |
| Placement on Vehicle | Front Axle Left, Upper, Front |
| Steering arm type | Control Arm |
| Paired article numbers | 27502 |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.31
Important compatibility info
| Function | Suspension, propshaft |
| Inner diameter | 30 mm |
| Type | Suspension, propshaft |
| Weight | 0.462 kg |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (02137)
£15.30
Important compatibility info
| Function | Brake Caliper |
| Weight | 2.109 kg |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181191 |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.15
Important compatibility info
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
| Length | 80 mm |
| Material | Rubber/Metal |
| Outer diameter | 44 mm |
| Inner diameter | 16 mm |
| Weight | 0.258 kg |
| Type | Bushing, leaf spring |
| Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.84
Important compatibility info
| Weight | 1.283 kg |
| Width | 23 mm |
| Number of Teeth | 150 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| for OE number | 06B 109 119 A S3 |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. tensioner pulley |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19546)
- 1x Febi Tensioner Pulley, timing belt (18556)
- 1x Febi Tensioner, timing belt (22346)
£109.71
Important compatibility info
| Weight | 1.94 kg |
| Type | Brake Caliper |
| Paired article numbers | 181698 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 48 mm |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Weight | 0.102 kg |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 19 |
| Number of Connectors / Ports | 2 |
| Switch Point | 130 °C |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| for OE number | 008 542 45 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023