Important compatibility info
External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M14 x 2 |
Weight | 5.7 kg |
Placement on Vehicle | Rear Axle, non-steered trailing axle |
Outer diameter | 229 mm. 168 mm |
Thickness | 630 mm. 185 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Additional Information | with piston rod, with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 425 mm |
Width | 55 mm |
Function | Camshaft |
Type | Camshaft |
Weight | 4.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 27 |
Weight | 7.500 kg |
External Teeth, Diff.Side | 23 |
Min. Length | 973 mm |
Wheel Sided Joint Diameter | 82.4 mm |
Transmission-side joint diameter | 74 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Grey Cast Iron |
Number of grooves | 10 |
Seal Material | Rubber |
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Number of Wings | 7 |
Weight | 3.6 kg |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
for OE number | 58 0193 1331 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner length 2 | 770 mm |
Inner length 1 | 810 mm |
Weight | 0.934 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Outer length 1 | 1039 mm |
Outer length 2 | 1090 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, manual transmission |
Inner length 1 | 722 mm |
Type | Cable Pull, manual transmission |
Weight | 1.258 kg |
Inner length 2 | 742 mm |
Outer length 1 | 990 mm |
Outer length 2 | 1010 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
Function | Drive Shaft |
Weight | 8.210 kg |
External Teeth, Wheel Side | 40 |
Placement on Vehicle | Front Axle Left |
Additional Information | with Split Pin |
Thread Size | M10x1,5 |
Transmission-side joint diameter | 93.5 mm |
Type | Drive Shaft |
Wheel Sided Joint Diameter | 92.2 mm |
External Teeth, Diff.Side | 31 |
Min. Length | 548 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Weight | 0.659 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 96 |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45953)
- 1x Febi Tensioner, timing chain (46275)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
- 1x Febi Guide, timing chain (49690)
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Weight | 3.7 kg |
Min. Length | 333 mm |
Pipe Diameter | 45 mm |
Mounting points diameter | 16 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pump |
Weight | 1.369 kg |
Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Thickness | 10 mm |
Weight | 0.321 kg |
Type | Gasket, cylinder head |
Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rated Power | 2.2 kW |
Number of Teeth | 9 |
Function | Starter |
Voltage | 12 V |
Weight | 5.7 kg |
Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head Cover |
Weight | 1.728 kg |
Type | Cylinder Head Cover |
Colour | Black |
Paired article numbers | 182648 |
Material | Plastic |
Additional Information | with gasket/seal |
Placement on Vehicle | Left |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt Set |
Weight | 4.034 kg |
Extra Description | ProKit |
Type | V-Ribbed Belt Set |
Units / Pulleys | incl. deflection pulley |
Length 1 | 1342 mm |
Additional Information | with clamping elements |
Length 2 | 1526 mm |
Number of ribs 2 | 8 |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of ribs 1 | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (38983)
- 1x Febi V-Ribbed Belt (40707)
- 1x Febi V-Ribbed Belt (34350)
- 2x Febi Belt Tensioner, v-ribbed belt (27117)
Important compatibility info
Fill Medium | Brake Fluid |
Function | Clutch Booster |
Weight | 2.934 kg |
Type | Clutch Booster |
Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | EGR Valve |
Type | EGR Valve |
Weight | 0.73 kg |
Additional Information | with gasket/seal |
Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.130 kg |
External Thread Size | M14 x 1,5 |
Spanner Size | 32 |
Number of Connectors / Ports | 4 |
Cable Length | 180 mm |
Type | Sensor, oil pressure |
Function | Sensor, oil pressure |
for OE number | 1 881 260 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Weight | 6.103 kg |
Cone Size | 21 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.33 kg |
Placement on Vehicle | Front Axle |
Length | 1045 mm |
Additional Information | with rubber mounts |
Stabiliser Diameter | 19 mm |
Function | Stabiliser Bar, suspension |
Type | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Stabiliser Diameter | 21 mm |
Length | 1075 mm |
Placement on Vehicle | Front Axle |
Function | Stabiliser Bar, suspension |
Weight | 4.55 kg |
Additional Information | with rubber mounts |
Extra Description | ProKit |
Type | Stabiliser Bar, suspension |
Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (36651)
- 1x Febi Repair Kit, stabiliser bush (36757)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023