Important compatibility info
Weight | 1.04 kg |
Outer diameter | 105 mm |
Inner diameter | 21 mm |
Number of Teeth | 40 |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.750 kg |
Material | Grey Cast Iron |
Number of Wings | 12 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
for OE number | 51.06500.6669 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Placement on Vehicle | Rear Axle |
Outer diameter | 358 mm |
Thickness | 73.5 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 130 mm |
Centering Diameter | 85 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Weight | 9.66 kg |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 6 |
for OE number | 4 515 688 |
Weight | 0.038 kg |
Type | Mass Air Flow Sensor |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-film Sensor |
Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 17.5 mm |
Operating Mode | Hydraulic |
Rotation Direction | Clockwise rotation |
Weight | 1.753 kg |
Number of mounting bores | 3 |
for OE number | 49 11 009 15R |
Mounting points diameter | 8 mm |
Type | Hydraulic Pump, steering |
Operating pressure to | 12 bar |
Function | Hydraulic Pump, steering |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
Weight | 0.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.645 kg |
Voltage | 24 V |
Number of Connectors / Ports | 5 |
Function | Wiper Motor |
Placement on Vehicle | Front |
Type | Wiper Motor |
Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 90 A |
Belt Pulley Diameter | 54 mm |
Weight | 4.732 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 100 A |
Belt Pulley Diameter | 55 mm |
Weight | 6.4 kg |
Current Strength | 100 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Length | 908 mm |
Weight | 9.700 kg |
Placement on Vehicle | Front Axle |
Function | Centre Rod Assembly |
External Thread Size | M20 x 1,5 |
Cone Size | 28.6 mm |
Rod/Strut | Push Rod |
Adjustable | Adjustable on one side |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Pipe Diameter | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Adjustable | Adjustable on one side |
Cone Size | 28.6 mm |
Diameter 1 | 52 mm |
Rod/Strut | Push Rod |
Weight | 9.880 kg |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Placement on Vehicle | Front Axle |
Length | 895 mm |
Material | Steel |
Additional Information 2 | with crown nut |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1646 mm |
Rod/Strut | Guide Rod |
Weight | 11.0 kg |
Cone Size | 30 mm |
Pipe Diameter | 40 mm |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | EGR Valve |
for OE number | 11 71 7 804 379 |
Type | EGR Valve |
Weight | 0.651 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 20.5 kg |
Extra Description | ProKit |
Function | Tie Rod |
Type | Tie Rod |
Cone Size | 30 mm |
for OE number | 2 973 569 |
Placement on Vehicle | Front Axle |
Length | 1743 mm |
Additional Information 2 | with crown nut |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Pipe Diameter | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Voltage | 12 V |
Number of Connectors / Ports | 4 |
Function | Wiper Motor |
Weight | 1.208 kg |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Max. Length | 275 mm |
Min. Length | 233 mm |
Pipe Diameter | 42 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 2.73 kg |
External Thread Size | M14 x 1,5 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 52 mm |
Weight | 5.12 kg |
Current Strength | 70 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 83 mm |
Voltage | 12 V |
Operating Mode | Electric |
Number of Connectors / Ports | 6 |
Function | Throttle body |
Weight | 0.94 kg |
Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 30 mm |
Function | Centre Rod Assembly |
Length | 1080 mm |
Rod/Strut | Guide Rod |
Adjustable | Adjustable on one side |
Weight | 5.8 kg |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.180 kg |
Colour | Grey |
Number of Connectors / Ports | 10 |
Combi Switch Function | with klaxon, with light dimmer function, with indicator function, with high beam function |
Function | Steering Column Switch |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023