Important compatibility info
| Type | Screw Plug, oil sump |
| Length | 29 mm |
| Function | Screw Plug, oil sump |
| Screw length below head | 25 mm |
| Extra Description | febi Plus |
| Spanner Size | 8 |
| Thread Length | 16 mm |
| Bolt Head/Nut Design | Hexagon Socket |
| Outer diameter | 33.7 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer, Lower, Rear |
| Inner diameter | 13 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Outlet |
| Height | 6.5 mm. 8.1 mm |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Shaft Seal, manual transmission |
| Function | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper |
| Function | Radiator Hose |
| Inner diameter | 30 mm |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Stop Light Switch |
| Operating Mode | Electric |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 47 mm |
| Type | Air Filter |
| Length | 280 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Width | 206 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 38 mm |
| Width | 174 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
| Additional Information 2 | with pre-filter |
| Length | 253 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Length | 56.3 mm |
| Outer diameter | 55.5 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 316 mm |
| Filter type | Filter Insert |
| Width | 190 mm |
| Type | Air Filter |
| Function | Air Filter |
| Height | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 30 mm |
| Thickness | 57 mm |
| Outer diameter | 50 mm |
| Material | Rubber |
| Width | 54 mm |
| Length | 50 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Colour Coding | Grey |
| Additional Information | with gasket/seal, with retaining spring |
| Function | Sensor, coolant temperature |
| Screw length below head | 20 mm |
| Type | Sensor, coolant temperature |
| Replaces | 33911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 300 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M12 x 1,5 |
| Width | 25 mm |
| Thickness | 64 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 27 mm |
| Material | Plastic |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 95 mm |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 26096 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 26097 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Length | 95 mm |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 250 mm |
| Height | 25 mm |
| Width | 234 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 550 mm. 108 mm |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 47 mm |
| Width | 53 mm |
| Thickness | 57 mm |
| Inner diameter | 20 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 83 mm |
| Outer diameter | 65 mm |
| Inner diameter | 19 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
| Length | 253 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
| Function | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air Filter |
| Width | 235 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Length | 254 mm |
| Height | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Filter |
| Gasket outer diameter | 80.7 mm |
| Gasket inner diameter | 73.5 mm |
| Inner diameter | 26 mm |
| Filter type | Filter Insert |
| Outer diameter | 65 mm |
| Type | Oil Filter |
| Additional Information | with gasket/seal, with fastening/mounting material |
| Height | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane), Rubber |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Height | 146 mm |
| Outer diameter | 55.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rubber Buffer, suspension (01525)
- 1x Febi Protective Cap/Bellow, shock absorber (06985)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 16 mm |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Replaces | 41882 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Length | 310 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| for OE number | 8Z0 423 810 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 184 mm |
| Material | Thermoplast |
| Inner diameter 1 | 18 mm |
| Inner diameter 2 | 52 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (39832)
- 1x Febi Clamping Clip (38763)
- 1x Febi Clamping Clip (33359)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 85 mm |
| Width | 52 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod |
| Spanner Size | 10 |
| Function | Ball Joint, axle strut |
| Internal Thread Size | M6 x 1,0 LHT |
| Type | Ball Joint, axle strut |
| Placement on Vehicle | Rear Axle |
| Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 440 mm |
| Type | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 180 mm |
| Spanner Size | 13 |
| Rod/Strut | Coupling Rod |
| Surface | Zinc-coated |
| DIN / ISO | 985 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5, M8 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 349 mm |
| Inner diameter | 16 mm |
| Spanner Size | 30 |
| Rod/Strut | Coupling Rod |
| External Thread Size | M12 x 1,75 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 78 mm |
| Inner diameter 1 | 22 mm |
| Material | Rubber |
| Length | 103 mm |
| Replaces | 06299 |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03288)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | FPM (fluoride rubber) |
| Outer diameter | 88 mm |
| Thickness | 8 mm |
| Inner diameter | 74 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 192 mm |
| Filter type | Filter Insert |
| Length | 243 mm |
| Function | Air Filter |
| Height | 58 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 83 °C |
| Heating / Cooling | without vent hole |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (15846)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Outer diameter | 46 mm |
| Thickness | 55 mm |
| Inner diameter | 20 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Shape/Form | slotted |
| Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right, Rear |
| Outer diameter | 47 mm |
| Inner diameter | 12 mm |
| Thickness | 60 mm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Filter, cabin air |
| Length | 195 mm |
| Filter type | Pollen Filter |
| Width | 145 mm |
| Height | 31 mm |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 248 mm |
| Type | Air Filter |
| Function | Air Filter |
| Width | 148 mm |
| Height | 45 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 126 mm |
| Outer diameter | 74 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 32 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
| Type | Control, swirl flaps (induction pipe) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Inner diameter | 16.2 mm |
| Thickness | 62 mm |
| Outer diameter | 51 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Lower, Outer, Rear Axle Right |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 8 mm |
| Filter type | Filter Insert |
| Height | 91 mm |
| Outer diameter | 66 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Seal Diameter | 7.7 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Activated Carbon Filter |
| Width | 216 mm |
| Height | 18 mm |
| Length | 216 mm |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 269 mm |
| Height | 60 mm |
| Width | 175 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1 |
| Function | Brake Hose |
| Length | 465 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, at brake caliper |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 03583 |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Right |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Replaces | 10580 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 200 mm |
| Material | Rubber |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 49 mm |
| Inner diameter 1 | 16 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (26324)
- 1x Febi Clamping Clip (38763)
- 1x Febi Clamping Clip (38756)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 330 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































