Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 160 mm |
| Outer diameter | 160 mm |
| Thickness | 35 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101778)
- 3x Febi Screw (109456)
- 4x Febi Screw (109454)
- 4x Febi Nut (19104)
£120.52
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Min. Length | 472 mm |
| Wheel Sided Joint Diameter | 89.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.52
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts, with seal ring |
| for OE number | 5 0036 2859 |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.52
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 126 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33892)
- 1x Febi Guide, timing chain (30546)
- 1x Febi Guide, timing chain (30547)
- 1x Febi Tensioner, timing chain (30548)
- 1x Febi Gasket, timing case (102340)
- 2x Febi Screw (100646)
- 1x Febi Screw Plug, oil sump (46332)
- 1x Febi Seal Ring, oil drain plug (04054)
£120.50
Important compatibility info
| Width | 68 mm |
| Outer diameter | 173 mm |
| Inner diameter | 37 mm |
| Number of Ribs | 6 |
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with bolts/screws |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32220)
£120.48
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 186 |
| Function | Timing Chain Kit |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09277)
- 1x Febi Guide, timing chain (10413)
- 3x Febi Guide, timing chain (10411)
- 1x Febi Guide, timing chain (10414)
- 1x Febi Guide, timing chain (10412)
- 1x Febi Tensioner, timing chain (02135)
£120.48
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40341 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (14523)
- 2x Febi Camber Correction Screw (07758)
- 1x Febi Bolt, control arm (11154)
- 1x Febi Nut, exhaust manifold (01554)
- 1x Febi Nut (06877)
- 1x Febi Nut (22263)
£120.48
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 57 mm |
| Material | Cast Iron |
| Paired article numbers | 182272 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.48
Important compatibility info
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182271 |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.48
Important compatibility info
| Mounting points diameter | 14 mm |
| Min. Length | 460 mm |
| Function | Shock Absorber |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Max. Length | 760 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Pipe Diameter | 53 mm. 45 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.45
Important compatibility info
| Material | Aluminium |
| Function | Cylinder Head Cover |
| Additional Information | without gasket/seal |
| Extra Description | febi Plus |
| Heating / Cooling | without breather valve |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.38
Important compatibility info
| Placement on Vehicle | Intake Side |
| Inner diameter | 13 mm |
| Number of Teeth | 46 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.37
Important compatibility info
| Placement on Vehicle | Right Front |
| for OE number | 961 241 58 13 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.36
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.29
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 635 mm |
| Min. Length | 417 mm |
| Shock Absorber Type | Oil Pressure |
| Replaces | 20146 |
| Placement on Vehicle | Front Axle |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.27
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 984 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 60 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.19
Important compatibility info
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.99
Important compatibility info
| Outer diameter | 300 mm |
| Material | Steel |
| Length | 609 mm |
| Capacity | 36 l |
| Operating Pressure | 12.5 bar |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.96
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Internal Thread Size | M16 x 1,5, M18 x 1,5 |
| Type | Mounting, engine |
| for OE number | 961 241 48 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.86
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M10 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.85
Important compatibility info
| Placement on Vehicle | Driver side |
| Number of Connectors / Ports | 17 |
| for OE number | 22566510 |
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
| Combi Switch Function | Window Regulator, Mirror Adjustment, Door Locking, Heated wing mirror on/off |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.79
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.79
Important compatibility info
| Placement on Vehicle | Intake Side |
| Number of Teeth | 46 |
| Engine Management | Timing Belt |
| Function | Camshaft Adjuster |
| Additional Information 2 | with screw |
| Paired article numbers | 46117 |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (46087)
- 1x Febi Bolt, camshaft gear (46098)
- 1x Febi Tensioner, timing chain (46119)
£119.77
Important compatibility info
| Hole Spacing | 115 mm |
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 799 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.74
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.71
Important compatibility info
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 702 mm |
| Min. Length | 470 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.66
Important compatibility info
| Outer diameter | 153 mm |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Parameter | 6 PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.63
Important compatibility info
| Inner diameter | 31 mm |
| Number of Ribs | 9 |
| Parameter | 4PK + 7PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with bolts/screws |
| Width | 54 mm |
| Outer diameter | 165 mm |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (30176)
- 4x Febi Pulley Bolt (33822)
£119.54
Important compatibility info
| Length | 98 mm |
| Number of Connectors / Ports | 4 |
| Function | Main Switch, battery |
| Type | Main Switch, battery |
| Hole Spacing | 59 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.54
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 142 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Additional Information | with crankshaft gear |
| Replaces | 33846 |
| for OE number | 11 34 8 649 768 S3 |
| Additional Information 2 | with bolts/screws |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29868)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29536)
- 1x Febi Guide, timing chain (29537)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£119.54
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023