Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 340 mm |
| Height | 57 mm |
| Width | 198 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.13
Important compatibility info
| Length | 126 mm |
| Height | 126 mm |
| Outer diameter | 21 mm. 60 mm. 72 mm. 82 mm. 83 mm |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M16 x 1,5 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Pipe Diameter | 64 mm. 76 mm |
| Min. Length | 330 mm |
| Max. Length | 534 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.38
Important compatibility info
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (49544)
- 3x Febi Screw (01696)
- 3x Febi Nut (19104)
- 3x Febi Washer (19107)
£68.20
Important compatibility info
| Material | Metal |
| Outer diameter | 84 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Mounting points diameter | 17 mm |
| Inner diameter | 17 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.28
Important compatibility info
| Inner diameter | 14 mm |
| Filter type | Filter Insert |
| Additional Information | with gaskets/seals |
| Function | Oil Filter |
| Height | 202 mm |
| Outer diameter | 111 mm |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.40
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 801 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Mounting points diameter | 20 mm. 16 mm |
| Min. Length | 485 mm |
| Pipe Diameter | 76 mm. 65 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£170.89
Important compatibility info
| Function | Repair Kit, automatic clutch adjustment |
| Type | Repair Kit, automatic clutch adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.53
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 30 mm |
| Thickness | 15 mm |
| Function | Mounting, radiator |
| Type | Mounting, radiator |
| External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.57
Important compatibility info
| Bolt Hole Circle Diameter | 124 mm |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.05
Important compatibility info
| Placement on Vehicle | Front Axle |
| Bearing/Mounting Type | Rubber Mount |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.50
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 55 mm |
| Inner diameter | 18 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Length | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.78
Important compatibility info
| Placement on Vehicle | Front Axle, Lower Front Axle, Upper Front Axle |
| Material | Rubber |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.86
Important compatibility info
| Length | 423 mm |
| Height | 48 mm |
| Width | 200 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Additional Information 2 | with pre-filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.19
Important compatibility info
| Length | 349 mm |
| Height | 49 mm |
| Width | 227 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.82
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Outer diameter 1 | 71 mm |
| Width | 44.4 mm |
| Outer diameter | 76 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | High-pressure Pump |
| Type | High-pressure Pump |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£213.27
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear, Rear Axle Right |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Inner diameter | 17.7 mm |
| Thickness | 65 mm |
| Outer diameter | 56.2 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.35
Important compatibility info
| Function | Oil Cooler, automatic transmission |
| Type | Oil Cooler, automatic transmission |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.97
Important compatibility info
| Function | Finger Follower, engine timing |
| Type | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.40
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Length | 39 mm |
| Width | 30 mm |
| Inner diameter | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.51
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 118 mm |
| Material | Steel |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.23
Important compatibility info
| Internal Thread Size | M6 |
| Length | 207 mm |
| Outer diameter | 24 mm |
| Inner diameter | 8 mm |
| Colour | Black |
| Stroke | 38 mm |
| Function | Vibration Damper, v-ribbed belt |
| Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.12
Important compatibility info
| Placement on Vehicle | Cylinder Head |
| Material | Plastic |
| Function | Coolant Flange |
| Type | Coolant Flange |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.70
Important compatibility info
| Function | Hose, crankcase ventilation |
| for OE number | 103 094 00 82 |
| Type | Hose, crankcase ventilation |
| Hose Length | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.81
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Replaces | 47661 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29534)
- 1x Febi Guide, timing chain (29535)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£122.06
Important compatibility info
| Material | PP (Polypropylene) |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 13 04 222 |
| Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.46
Important compatibility info
| Water pump impeller material | Plastic |
| Number of Teeth | 28 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Housing Type | with housing |
| Seal Material | Rubber |
| Housing material | Aluminium |
| Additional Information 2 | with thermostat |
| Type | Water Pump, engine cooling |
| for OE number | 04E 121 600 CR |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£183.55
Important compatibility info
| Length | 301 mm |
| Height | 56 mm |
| Width | 173 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.81
Important compatibility info
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.10
Important compatibility info
| for OE number | 11 31 8 618 317 S8 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HR, G53HP, 53RING |
| Extra Description | Full Kit |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29532)
- 1x Febi Guide, timing chain (29533)
- 1x Febi Sprocket, crankshaft (30458)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Gasket, cylinder head cover (32987)
- 1x Febi Shaft Seal, crankshaft (47566)
- 1x Febi Gasket, oil sump (36379)
£184.65
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 56 mm |
| Outer diameter | 78 mm |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 32 mm |
| Bearing Type | Angular Ball Bearing |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.88
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (178709)
- 2x Febi Protective Cap/Bellow, shock absorber (181467)
£20.01
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from expansion tank to water pipe |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.52
Important compatibility info
| Additional Information | with temperature sensor, with gasket/seal |
| Opening Temperature | 82 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.63
Important compatibility info
| Outer diameter | 42 mm. 56 mm |
| Thickness | 63 mm |
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Replaces | 42053 |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.26
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Inner diameter | 26 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.26
Important compatibility info
| Manufacturer | BorgWarner |
| Paired article numbers | 186955 |
| Charge Type | Exhaust Turbocharger, First stage of the two-stage charging |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | BorgWarner Turbo REMAN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£680.48
Important compatibility info
| Material | Plastic |
| Outer diameter | 135 mm |
| Inner diameter | 30 mm |
| Thickness | 18 mm |
| Function | Belt Pulley, power steering pump |
| Extra Description | febi Plus |
| Type | Belt Pulley, power steering pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.76
Important compatibility info
| Length | 68 mm |
| Outer diameter | 18 mm |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.11
Important compatibility info
| Type | Tensioner, timing belt |
| Function | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.20
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Width | 42 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.69
Important compatibility info
| Additional Information | with gasket/seal |
| Placement on Vehicle | Cylinder Head |
| Material | Plastic |
| Function | Coolant Flange |
| Type | Coolant Flange |
| for OE number | 11 53 1 743 199 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.03
Important compatibility info
| Width | 20 mm |
| Number of Teeth | 130 |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19364)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21766)
- 1x Febi Tensioner Pulley, timing belt (11274)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (11339)
£69.59
Important compatibility info
| Width | 32 mm |
| Material | Plastic |
| Outer diameter | 65 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.93
Important compatibility info
| for OE number | 06 36 176 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 148 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33043)
- 1x Febi Tensioner, timing chain (33044)
- 1x Febi Guide, timing chain (173887)
- 1x Febi Guide, timing chain (173890)
- 1x Febi Guide, timing chain (106667)
- 1x Febi Gear/Sprocket, camshaft (173894)
- 1x Febi Gear/Sprocket, camshaft (173895)
- 1x Febi Sprocket, crankshaft (174669)
- 1x Febi Oil Jet, timing chain (174153)
- 2x Febi Screw (33067)
- 2x Febi Screw (33068)
- 2x Febi Screw (33069)
- 2x Febi Bolt, camshaft gear (172269)
£194.19
Important compatibility info
| Width | 28 mm |
| Material | Plastic |
| Outer diameter | 46 mm |
| Inner diameter | 10 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.69
Important compatibility info
| Width | 34.5 mm |
| Outer diameter | 47 mm |
| Inner diameter | 27 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.31
Important compatibility info
| Outer diameter | 97 mm |
| Thickness | 24 mm |
| Inner diameter | 15 mm |
| Type | Deflection Pulley/Guide Pulley, V-belt |
| Function | Deflection Pulley/Guide Pulley, V-belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.77
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023