Important compatibility info
| Length | 211 mm |
| Height | 29 mm |
| Width | 205 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Parameter | Typ 20 / 30 |
| Outer diameter | 13.8 mm |
| Function | Mounting Kit, diaphragm brake cylinder |
| Type | Mounting Kit, diaphragm brake cylinder |
| Length | 78.5 mm |
| Additional Information | Round hole clevis design |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 60 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| for OE number | 038 121 132 D |
| Function | Coolant Flange |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Upper |
| Thickness | 66 mm |
| Function | Spring Seat |
| Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 380 mm |
| Height | 42 mm |
| Width | 156 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 61 mm. 27 mm |
| Thickness | 46 mm |
| Inner diameter | 13 mm |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | Tripod Joint |
| Length | 85 mm |
| Material | Rubber |
| Inner diameter 2 | 72 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22016)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 365 mm |
| Spanner Size | 14 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 142 mm |
| Outer diameter | 96 mm |
| Filter type | Spin-on Filter |
| Function | Oil Filter |
| Internal Thread Size | 3/4" - 16 UNF |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 123 mm |
| Outer diameter | 76 mm |
| Filter type | Spin-on Filter |
| Function | Oil Filter |
| Internal Thread Size | 3/4" - 16 UNF |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Length | 182 mm |
| Height | 25 mm |
| Width | 161 mm |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Guide Sleeve, clutch |
| Type | Guide Sleeve, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Flange |
| Additional Information | with gasket/seal |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 12 mm |
| Thickness | 55 mm |
| Outer diameter | 60.5 mm |
| Material | Rubber/Metal |
| Width | 61 mm |
| Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
| Length | 55 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Protection Lid, wheel hub |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 11 12 7 806 196 |
| Additional Information | with gasket/seal |
| Type | Coolant Flange |
| Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Bellow, steering |
| Type | Bellow, steering |
| Inner diameter 2 | 54 mm |
| Inner diameter 1 | 15 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 191 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Function | Bellow, steering |
| Type | Bellow, steering |
| Inner diameter 2 | 51 mm |
| Inner diameter 1 | 16 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 173 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 215 mm |
| Height | 29 mm |
| Width | 185 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Finger Follower, engine timing |
| Function | Finger Follower, engine timing |
| for OE number | 0903.69 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Centre, Front |
| Length | 306 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Replaces | 07238 |
| Type | Tie Rod End |
| External Thread Size | M14 x 1,5, M10 x 1 |
| Additional Information | with lock nut |
| Cone Size 2 | 14 mm |
| Cone Size 1 | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 87 mm |
| Outer diameter | 98 mm |
| Inner diameter | 72 mm |
| Function | Pipe Connector, exhaust system |
| Type | Pipe Connector, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 238 mm |
| Material | Aluminium |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 262 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Extra Description | ProKit |
| Function | Mounting, control/trailing arm |
| Inner diameter | 12.1 mm |
| Thickness | 64 mm |
| Outer diameter | 60 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Centre, Rear Axle Right |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (104473)
- 1x Febi Fastening Bolt, control arm (175145)
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| for OE number | 61 66 1 377 830 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 105 mm |
| Outer diameter | 73 mm |
| Filter type | Filter Insert |
| Seal Diameter | 22 mm |
| Function | Oil Filter |
| Seal Material | NBR (nitrile butadiene rubber) |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 295 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Height | 32 mm |
| Width | 235 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 217 mm |
| Height | 17 mm |
| Width | 107 mm |
| Filter type | Pollen Filter |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 185492 |
| Colour | Black |
| Type | Door Handle, interior equipment |
| Function | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 193 mm |
| Material | Thermoplastic polyester elastomer |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 15 mm |
| Inner diameter 2 | 55 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 261 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
| for OE number | 4H0 615 121 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, drive shaft |
| Material | ACM (Polyacrylate) |
| Outer diameter | 52 mm |
| Thickness | 11 mm |
| Inner diameter | 40 mm |
| Type | Shaft Seal, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 185493 |
| Type | Door Handle, interior equipment |
| Function | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 74.5 mm |
| Material | Rubber/Metal |
| Outer diameter | 59 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1400 mm |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Number of Connectors / Ports | 2 |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Outer diameter | 39 mm |
| Thickness | 46 mm |
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 37993 |
| Placement on Vehicle | Front Axle Left, Rear, Lower, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| for OE number | 77 01 469 231 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Assembly Kit, propshaft joint |
| Type | Assembly Kit, propshaft joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Bolt, drive shaft flange (04678)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 545 mm |
| Outer diameter | 9.9 mm |
| Spanner Size | 14 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Pollen Filter |
| Length | 216 mm |
| Height | 30 mm |
| Width | 200 mm |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 19 mm |
| Width | 82 mm |
| Filter type | Pollen Filter |
| Function | Filter Set, cabin air |
| Length | 288 mm |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 41417 |
| Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
| Outer diameter | 66 mm |
| Thickness | 60 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, inner |
| Length | 64 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber with fabric lining |
| Inner diameter | 30 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber |
| Inner diameter | 14 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 36 mm |
| Thickness | 42 mm |
| Inner diameter | 26 mm |
| Outer diameter | 47 mm |
| Width | 47 mm |
| Material | Rubber |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right |
| Outer diameter | 37 mm |
| Thickness | 55 mm |
| Inner diameter | 13 mm |
| Bearing/Mounting Type | Rubber Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Replaces | 41392 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































