Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.180 kg |
| Colour | Grey |
| Number of Connectors / Ports | 10 |
| Combi Switch Function | with klaxon, with light dimmer function, with indicator function, with high beam function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.49
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Weight | 1.464 kg |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR, G53AM, G53HC |
| Replaces | 33040; 33083 |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17617)
- 1x Febi Tensioner, timing chain (12119)
- 1x Febi Gear Set, engine timing (33033)
- 1x Febi Guide Rails Kit, timing chain (46414)
- 1x Febi Screw Set, gears (timing chain) (46415)
- 1x Febi Sleeve (46469)
- 1x Febi Gasket Kit, crankcase (46470)
£119.43
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top pin, Bottom Yoke |
| Max. Length | 400 mm |
| Min. Length | 361 mm |
| Pipe Diameter | 62 mm. 45 mm |
| Piston conrod diameter | 18 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M14 x 1,5 |
| Weight | 3.6 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.42
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 6.4 kg |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.41
Important compatibility info
| Weight | 10.78 kg |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Replaces | 03584 |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.32
Important compatibility info
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Manual |
| Weight | 3.5 kg |
| Suction side external thread size | M12 x 1,5 |
| Internal Thread Size | M10 x 1,5 |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.30
Important compatibility info
| Weight | 11.3 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 45 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 115 mm |
| Centering Diameter | 70.7 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.30
Important compatibility info
| Weight | 0.836 kg |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
| for OE number | 00 4128 5311 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.25
Important compatibility info
| Thickness | 125 mm |
| Function | Clutch, radiator fan |
| Weight | 2.117 kg |
| Outer diameter | 165 mm |
| for OE number | 904 200 08 22 |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.24
Important compatibility info
| Weight | 3.0 kg |
| Length | 520 mm |
| Height | 210 mm |
| Width | 390 mm |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Fill quantity | 12 l |
| Extra Description | ProKit |
| Opening pressure | 120 kPa |
| Type | Expansion Tank, coolant |
| Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.24
Important compatibility info
| Weight | 5.1 kg |
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (35421)
- 1x Febi Filter Kit, crankcase ventilation (172336)
- 1x Febi Seal, oil filter housing (05970)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Seal Ring, oil drain plug (35640)
- 2x Febi Seal, oil filter housing (35618)
- 2x Febi Oil Filter, manual transmission (38975)
- 1x Febi Air Dryer Cartridge, compressed-air system (35304)
- 1x Febi Filter, cabin air (22095)
- 1x Febi Oil Filter (172139)
£119.20
Important compatibility info
| Placement on Vehicle | non-steered leading axle |
| Thickness | 547 mm. 153 mm |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5 |
| Function | Bellow, air suspension |
| Outer diameter | 228 mm |
| Weight | 7.27 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.07
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 80 mm |
| Outer diameter | 133 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 25 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 2.1 kg |
| Additional Information | with fastening/mounting material |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.05
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Weight | 2.477 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.05
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Weight | 7.340 kg |
| External Teeth, Diff.Side | 31 |
| Min. Length | 590 mm |
| Wheel Sided Joint Diameter | 91.3 mm |
| Transmission-side joint diameter | 88.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.04
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 984 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Weight | 12.000 kg |
| Cone Size | 32 mm |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.04
Important compatibility info
| Weight | 0.102 kg |
| Type | Oxygen Sensor |
| Number of circuits | 4 |
| Cable Length | 625 mm |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.02
Important compatibility info
| Additional Information | with rubber mounts |
| for OE number | 204 326 04 65 S1 |
| Function | Stabiliser Bar, suspension |
| Placement on Vehicle | Rear Axle |
| Stabiliser Diameter | 16 mm |
| Type | Stabiliser Bar, suspension |
| Weight | 4.41 kg |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171135)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 2x Febi Nut (06859)
£119.01
Important compatibility info
| Outer diameter | 73 mm |
| Weight | 3.520 kg |
| Bearing Type | Tapered Roller Bearing |
| Width | 55 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 40 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.99
Important compatibility info
| Width | 23 mm |
| Number of Teeth | 150 |
| Surface | Coated |
| Water pump impeller material | Plastic |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.401 kg |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173220)
- 1x Febi Water Pump, engine cooling (15900)
£118.99
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023