Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Shaft Seal, drive shaft |
| Material | ACM (Polyacrylate) |
| Outer diameter | 52 mm |
| Thickness | 11 mm |
| Inner diameter | 40 mm |
| Type | Shaft Seal, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.47
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 85 mm |
| Inner diameter 1 | 35 mm |
| Material | Thermoplast |
| Length | 118 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38760)
- 1x Febi Clamping Clip (45644)
- 1x Febi Molybdenum Grease (02582)
£13.32
Important compatibility info
| Outer diameter | 164 mm |
| Thickness | 101 mm |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
| Hole Spacing | 97 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£283.12
Important compatibility info
| Length | 2253 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.96
Important compatibility info
| Type | Pedal Pad, clutch pedal |
| Function | Pedal Pad, clutch pedal |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.84
Important compatibility info
| Placement on Vehicle | Wheel Side, transmission sided, Rear Axle Left, Rear Axle Right |
| Length | 99 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 57 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.15
Important compatibility info
| Length | 99 mm |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08478)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Nut, kingpin (02346)
- 1x Febi Molybdenum Grease (02582)
£13.78
Important compatibility info
| Rod/Strut | Coupling Rod |
| Steering arm type | Trailing Arm |
| Placement on Vehicle | Upper Front Axle, both sides |
| Length | 330 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 36 mm |
| Cone Size | 36 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.19
Important compatibility info
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
| Inner diameter | 40 mm |
| Material | ACM (Polyacrylate) |
| Outer diameter | 55 mm |
| Placement on Vehicle | Left, Right |
| Width | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.23
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 134 mm |
| Thickness | 24 mm |
| Inner diameter | 37 mm |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Placement on Vehicle | Front |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.40
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Thickness | 43.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Outer diameter | 285 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.96
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.82
Important compatibility info
| Number of Teeth | 27 |
| Number of Wings | 12 |
| Housing material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| Material | Metal |
| Outer diameter | 74 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 68 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Thickness | 44 mm |
| Outer diameter | 269 mm |
| Number of mounting bores | 2 |
| Minimum thickness | 19.8 mm |
| Brake Disc Thickness | 22 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 228 mm |
| Outer diameter | 94.5 mm |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 60 mm |
| Internal Teeth, wheel side | 27 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 48 mm |
| Width | 39 mm |
| Material | Rubber/Metal |
| Thickness | 47 mm |
| Inner diameter | 14.5 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.34
Important compatibility info
| Hole Spacing | 130 mm |
| Steering arm type | for trailing arm |
| Additional Information 2 | with spacer disc, with retaining ring |
| Mounting points diameter | 19 mm |
| Type | Repair Kit, control/trailing arm |
| Function | Repair Kit, control/trailing arm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 85 mm |
| Length | 166 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.00
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 105 mm |
| Pipe Diameter | 30 mm |
| Cone Size | 20 mm |
| Thread Type | with right-hand thread |
| External Thread Size | M16 x 1,5, M24 x 1,5 RHT |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.07
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Length | 1688 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023