Important compatibility info
Weight | 0.07 kg |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Number of Connectors / Ports | 2 |
for OE number | 04L 906 088 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.924 kg |
Placement on Vehicle | Front Axle |
Length | 192.3 mm. 193 mm |
Width | 96.6 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 20.3 mm. 19.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.105 kg |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Width | 55.9 mm |
Brake System | TRW |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Rear Axle |
Length | 103.8 mm |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.144 kg |
Length | 1413 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 73 mm |
Thickness | 10 mm |
Inner diameter | 53 mm |
Function | Shaft Seal, wheel hub |
Weight | 0.002 kg |
Type | Shaft Seal, wheel hub |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Placement on Vehicle | Rear Axle |
Material | FPM (fluoride rubber) |
Outer diameter | 160.3 mm |
Thickness | 10 mm |
Inner diameter | 130.2 mm |
Function | Shaft Seal, wheel hub |
Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Right |
Weight | 1.301 kg |
Bearing/Mounting Type | Hydro Mount |
Replaces | 29329; 29969 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 675 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 198 mm |
Height | 61 mm |
Width | 143 mm |
Additional Information 2 | with seal ring |
Filter type | Screen Filter |
Weight | 0.22 kg |
Type | Hydraulic Filter, automatic transmission |
Function | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.900 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 228 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 22.2 mm |
Type | Brake Shoe Set |
Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | EGR Valve |
Function | EGR Valve |
Additional Information | with gasket/seal |
Weight | 0.683 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Length | 780 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Weight | 0.08 kg |
Chemical Properties | Elastic |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.124 kg |
Length | 321 mm |
Height | 60 mm |
Width | 128 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.490 kg |
Length | 298 mm |
Width | 238 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Height | 69 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Length | 280 mm |
Function | Brake Hose |
Weight | 0.08 kg |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Stub Shaft, differential |
Placement on Vehicle | Front Axle Right |
Weight | 0.88 kg |
Type | Stub Shaft, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.99 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (28245)
- 1x Febi Oil Filter (24665)
- 1x Febi Fuel filter (24663)
Important compatibility info
Length | 79 mm |
Width | 55 mm |
Thickness | 30 mm |
Voltage | 28 V |
Number of Connectors / Ports | 2 |
Function | Alternator Regulator |
Type | Alternator Regulator |
Weight | 0.085 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Coolant Flange |
Type | Coolant Flange |
Weight | 0.160 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.23 kg |
Cone Size | 22.5 mm |
Mounting points diameter | 12.2 mm |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Function | Ball Joint |
External Thread Size | M16 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 152 mm |
Length | 268 mm |
Filter type | Filter Insert |
Weight | 0.18 kg |
Type | Air Filter |
Height | 38 mm |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Function | Shaft Seal, drive shaft |
Material | ACM (Polyacrylate) |
Outer diameter | 52 mm |
Thickness | 11 mm |
Inner diameter | 40 mm |
Type | Shaft Seal, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 77 mm |
Function | Oil Filter |
Internal Thread Size | M20 x 1,5 |
Type | Oil Filter |
Outer diameter | 70 mm |
Filter type | Spin-on Filter |
Seal Diameter | 64 mm |
Weight | 0.223 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 1220 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Weight | 0.111 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 1.79 kg |
Type | Mounting, engine |
for OE number | 1363376080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.004 kg |
Extra Description | febi Plus |
Material | NBR (nitrile butadiene rubber) |
Inner diameter | 11 mm |
Inner diameter 1 | 6 mm |
Function | Hose, crankcase ventilation |
Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.24 kg |
Placement on Vehicle | Rear Axle Right |
Length | 75 mm |
Material | Steel |
Spanner Size | 17 |
Paired article numbers | 42966 |
Rod/Strut | Coupling Rod |
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.894 kg |
Placement on Vehicle | outer, Rear Axle |
Length | 166.5 mm |
Mounting points diameter | 19 mm |
Type | Repair Kit, control/trailing arm |
Function | Repair Kit, control/trailing arm |
Additional Information 2 | with retaining ring, with spacer disc |
Outer diameter | 75 mm |
Steering arm type | for trailing arm, for triangular control arm (CV) |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 644 mm |
Placement on Vehicle | Front |
Multi-piece | One-piece |
Type | Propshaft, axle drive |
Weight | 3.364 kg |
Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.141 kg |
Material | Aluminium, Rubber/Metal |
Outer diameter | 60 mm. 27 mm |
Thickness | 41 mm |
Inner diameter | 17 mm |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 38 |
Extra Description | febi Plus |
Placement on Vehicle | Intake Side |
Function | Camshaft Adjuster |
Type | Camshaft Adjuster |
Weight | 0.496 kg |
Paired article numbers | 178385 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.280 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 11 22 000 14R |
Paired article numbers | 184587, 184170 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 12 mm |
Type | Shock Absorber, driver cab suspension |
Max. Length | 236 mm |
Min. Length | 190 mm |
Pipe Diameter | 42 mm |
Weight | 1.1 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Function | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.1 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 166 mm. 100.8 mm |
Thickness | 350 mm |
Function | Bellow, air suspension |
Type | Bellow, air suspension |
Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 10 |
Function | V-Ribbed Belt |
Length | 1425 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.224 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Opening Pressure | 1.4 bar |
Function | Cap, coolant tank |
Colour | Blue |
Weight | 0.057 kg |
Type | Cap, coolant tank |
for OE number | 1H0 121 321 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Filter, cabin air |
Filter type | Activated Carbon Filter |
Width | 231 mm |
Height | 32 mm |
Weight | 0.290 kg |
Function | Filter, cabin air |
Length | 246 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.140 kg |
Outer diameter | 73.7 mm |
Material | Plastic |
Number of Ribs | 6 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Type | Deflection/Guide Pulley, v-ribbed belt |
Mounting points diameter | 8 mm |
Inner diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.172 kg |
Cone Size | 30 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 50 mm |
Type | Centre Rod Assembly |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Length | 995 mm |
Placement on Vehicle | Front Axle |
Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 109350 |
Number of Connectors / Ports | 2 |
Weight | 0.15 kg |
Cable Length | 1070 mm |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Mounting, control/trailing arm |
Weight | 0.561 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (22635)
- 2x Febi Mounting, control/trailing arm (22636)
Important compatibility info
Width | 26.5 mm |
Material | Plastic |
Outer diameter | 81 mm |
Number of Ribs | 6 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.235 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.078 kg |
Bolt Head/Nut Design | Male Hex |
Material | Steel |
Function | Wheel Nut |
Wheel Fastening | Flat Seat |
Quality/ Grade | 10 |
Surface | UV paint coated |
Spanner Size | 21 |
Thickness | 25 mm |
Outer diameter | 31.3 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Type | Wheel Nut |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.541 kg |
Placement on Vehicle | Lower |
Surface | Coated |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 70 |
Timing Chain Size | G68HS-8 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49528)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (48770)
- 1x Febi Guide, timing chain (48773)
Important compatibility info
Type | Gasket Set, cylinder liner |
Outer diameter 2 | 147 mm |
Outer diameter 1 | 152 mm |
Weight | 0.014 kg |
Function | Gasket Set, cylinder liner |
Thickness | 4 mm. 3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder liner (49827)
- 1x Febi Gasket, cylinder liner (49828)
Important compatibility info
Extra Description | febi Plus |
Type | Switch, tailgate release |
Function | Switch, tailgate release |
Number of Connectors / Ports | 2 |
Additional Information 2 | with plug |
Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Function | Joint, propshaft |
Weight | 0.97 kg |
Type | Joint, propshaft |
Additional Information 2 | with bolts/screws, with washers |
Additional Information | with nuts |
Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (23144)
- 3x Febi Screw (43594)
- 3x Febi Screw (43417)
- 6x Febi Nut (43418)
- 6x Febi Washer (43419)
Important compatibility info
Weight | 0.014 kg |
Cooling Hose | from expansion tank to engine cooler |
Type | Coolant Pipe |
Function | Coolant Pipe |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.4 kg |
for OE number | 51.06630.0144 S1 |
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 109 mm |
Function | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Bolt Hole Circle Diameter | 108 mm |
Width | 136 mm |
Weight | 3.490 kg |
Inner diameter | 29 mm |
Outer diameter | 136 mm |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023