Proud to be a UK-based company
Contact us
Important compatibility info
| Adjustable | Adjustable on one side |
| Cone Size | 28.6 mm |
| Diameter 1 | 52 mm |
| Rod/Strut | Push Rod |
| Weight | 9.880 kg |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
| Length | 895 mm |
| Material | Steel |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Placement on Vehicle | Left |
| Height | 130 mm |
| Width | 350 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193022 |
| Port / Connector type | ASS2 7 pin |
| Number of Connectors / Ports | 7 |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with reflector (triangular), with taillight, without number plate light |
| Weight | 1.17 kg |
| Depth | 120 mm |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Function | EGR Valve |
| for OE number | 11 71 7 804 379 |
| Type | EGR Valve |
| Weight | 0.651 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Weight | 9.51 kg |
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Internal Thread Size | M10 x 1,5 |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 60 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 275 mm |
| Min. Length | 233 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.73 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.5 kg |
| Placement on Vehicle | Left Front |
| Max. Length | 305 mm |
| Min. Length | 285 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 50 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Placement on Vehicle | Right |
| Height | 130 mm |
| Width | 350 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193023 |
| Port / Connector type | ASS2 7 pin |
| Number of Connectors / Ports | 7 |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with reflector (triangular), with taillight, without number plate light |
| Weight | 1.17 kg |
| Depth | 120 mm |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 10.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 580 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Weight | 1.208 kg |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Function | Hydraulic Pump, steering |
| Length | 173 mm |
| Height | 123 mm |
| Width | 152 mm |
| Rotation Direction | Clockwise rotation |
| Weight | 3.149 kg |
| Mounting points diameter | 11 mm |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 50 10 600 046 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1646 mm |
| Rod/Strut | Guide Rod |
| Weight | 11.0 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Weight | 4.542 kg |
| Extra Description | febi Plus |
| Type | Release Fork, clutch |
| Function | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Additional Information | with nuts |
| Weight | 13.0 kg |
| Placement on Vehicle | Front Axle |
| Length | 1657 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Weight | 1.31 kg |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | with spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.52
Important compatibility info
| Weight | 1.47 kg |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Number of Connectors / Ports | 4 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.52
Important compatibility info
| Outer diameter | 420 mm |
| Thickness | 74 mm |
| Rotation Direction | Clockwise rotation |
| Number of Wings | 7 |
| Function | Fan, engine cooling |
| Weight | 1.370 kg |
| Type | Fan, engine cooling |
| Switch Point | 68 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.52
Important compatibility info
| Weight | 1.910 kg |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.41
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Vehicle Equipment | for vehicles with electric parking brake |
| Weight | 2.075 kg |
| Paired article numbers | 186533 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.41
Important compatibility info
| Function | Brake Caliper |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake caliper piston diameter | 41 mm |
| Type | Brake Caliper |
| Paired article numbers | 186532 |
| Weight | 2.075 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.41
Important compatibility info
| Weight | 3.04 kg |
| Paired article numbers | 182947 |
| Brake caliper piston diameter | 41 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Iron |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.33
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Iron |
| Paired article numbers | 182946 |
| Weight | 3.04 kg |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.33
Important compatibility info
| Weight | 0.074 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.30
Important compatibility info
| External Thread Size | M8 x 1,25, M22 x 1,5 |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 286 mm |
| Thickness | 262 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 7.14 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.30
Important compatibility info
| Weight | 2.55 kg |
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Replaces | 45119 |
| Type | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30580)
- 1x Febi Water Pump, engine cooling (24360)
£116.23
Important compatibility info
| Weight | 0.82 kg |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.19
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.133 kg |
| Cable Length | 964 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.18
Important compatibility info
| Number of Teeth | 178 |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Weight | 2.83 kg |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 13568-29035 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26811)
- 1x Febi Water Pump, engine cooling (30638)
£116.11
Important compatibility info
| Weight | 1.79 kg |
| Length | 340 mm |
| Height | 285 mm |
| Width | 210 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.10
Important compatibility info
| Material | Grey Cast Iron |
| Number of grooves | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Number of Wings | 7 |
| Weight | 3.635 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 58 0193 1312 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.07
Important compatibility info
| Length | 430 mm |
| Spanner Size | 19 |
| Weight | 3.33 kg |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with seal ring |
| Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.06
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 38 |
| Paired article numbers | 178386 |
| Weight | 0.563 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.06
Important compatibility info
| Number of Teeth | 38 |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Weight | 0.496 kg |
| Paired article numbers | 178385 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.06
Important compatibility info
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 64.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 10.73 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.91
Important compatibility info
| Min. Length | 438 mm |
| Pipe Diameter | 76 mm. 65 mm |
| Mounting points diameter | 20 mm |
| Max. Length | 709 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Weight | 5.33 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.91
Important compatibility info
| Function | EGR Valve |
| Placement on Vehicle | Right |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Paired article numbers | 174957 |
| Weight | 0.792 kg |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.90
Important compatibility info
| Placement on Vehicle | non-steered trailing axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Piston conrod diameter | 15 mm |
| Mounting points diameter | 28 mm. 16 mm |
| Min. Length | 487 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 687 mm |
| Weight | 4.08 kg |
| Function | Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.87
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with piston |
| Outer diameter | 258 mm. 226 mm |
| Thickness | 157 mm. 475 mm |
| Weight | 7.3 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.87
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle, Rear Axle |
| Weight | 5.75 kg |
| External Thread Size | M16 x 1,5 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Pipe Diameter | 64 mm. 76 mm |
| Min. Length | 330 mm |
| Max. Length | 534 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.84
Important compatibility info
| Weight | 0.92 kg |
| Placement on Vehicle | Intake Side |
| Height | 36.5 mm |
| Number of Teeth | 40 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.82
Important compatibility info
| Function | Camshaft Adjuster |
| Number of Teeth | 40 |
| Weight | 0.940 kg |
| Height | 36.8 mm |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.82
Important compatibility info
| Weight | 2.5 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.79
Important compatibility info
| External Thread Size | M16 x 2, M12 x 1,5, M22 x 1,5, M8 x 1,25, M12 x 1,75 |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Weight | 6.6 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm |
| Thickness | 695 mm. 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.79
Important compatibility info
| Weight | 2.091 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.72
Important compatibility info
| Weight | 7.750 kg |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6669 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.70
Important compatibility info
| Weight | 1.04 kg |
| Outer diameter | 105 mm |
| Inner diameter | 21 mm |
| Number of Teeth | 40 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.70
Important compatibility info
| Number of Connectors / Ports | 6 |
| for OE number | 4 515 688 |
| Weight | 0.038 kg |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.69
Important compatibility info
| Brake Disc Thickness | 32 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Thickness | 51.7 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 30 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Weight | 11.0 kg |
| Type | Brake Disc Rotor |
| Rotor Style | perforated/vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.69
Important compatibility info
| Outer diameter | 17.5 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Weight | 1.753 kg |
| Number of mounting bores | 3 |
| for OE number | 49 11 009 15R |
| Mounting points diameter | 8 mm |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.64
Important compatibility info
| Weight | 0.174 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.61
Important compatibility info
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
| Weight | 0.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023