Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Shaft Seal, wheel bearing |
| Function | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter, cabin air |
| Filter type | Pollen Filter |
| Length | 229 mm |
| Height | 26 mm |
| Width | 201 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 30 mm |
| Placement on Vehicle | Rear Axle, Rear |
| Material | Rubber/Metal |
| Outer diameter | 47 mm |
| Inner diameter | 14 mm |
| Function | Mounting, differential |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 112 018 02 09 |
| Function | Hose, crankcase ventilation |
| Thickness | 50 mm |
| Width | 50 mm |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Hose Length | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Screw Plug, oil sump |
| Material | Plastic |
| External Thread Size | M14 x 1,5 |
| Extra Description | febi Plus |
| Outer diameter | 23 mm |
| Type | Screw Plug, oil sump |
| Additional Information 2 | with seal ring |
| Thread Length | 14 mm |
| Screw length below head | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 81 mm |
| Width | 67 mm |
| Function | Lift Point Pad, jack |
| Height | 30 mm |
| Shape/Form | rectangular |
| Extra Description | febi Plus |
| Type | Lift Point Pad, jack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Screw Plug, oil sump |
| Surface | Zinc-coated |
| Bolt Head/Nut Design | External Hexagon |
| Spanner Size | 17 |
| External Thread Size | M20 x 1,5 |
| Additional Information 2 | without seal ring |
| Thread Length | 13 mm |
| Type | Screw Plug, oil sump |
| Outer diameter | 28 mm |
| Length | 26 mm |
| Material | Steel |
| Screw length below head | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 165 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Replaces | 23166 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Outer diameter | 44 mm. 37 mm |
| Thickness | 55 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Lower Front Axle, Front |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Steering arm type | Control Arm |
| Function | Mounting and Bolting Kit, control/trailing arm |
| Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Washer (08375)
- 1x Febi Screw (17277)
- 1x Febi Screw (17274)
- 2x Febi Nut (21055)
- 1x Febi Washer (17278)
Important compatibility info
| Material | Steel |
| Height | 21 mm |
| Spanner Size | 30 |
| Placement on Vehicle | Rear Axle |
| Function | Nut, kingpin |
| Internal Thread Size | M20 x 1,5 |
| Outer diameter | 45 mm |
| Type | Nut, kingpin |
| Bolt Head/Nut Design | External Hexagon |
| Surface | Zink-nickel coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, radiator |
| Extra Description | febi Plus |
| Type | Mounting, radiator |
| Colour | Black |
| for OE number | 5Q0 121 367 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1 |
| Height | 13 mm |
| Function | Urea Filter |
| Outer diameter | 10 mm |
| Type | Urea Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Height | 80 mm |
| Outer diameter | 76 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 72 mm |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 50 mm |
| Width | 41 mm |
| Material | Rubber |
| Thickness | 48 mm |
| Inner diameter | 26 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 265 mm |
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 218 mm |
| Height | 21 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 220 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Additional Information 2 | with buckle protection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Function | Cap, coolant tank |
| Opening Pressure | 1.5 bar |
| Type | Cap, coolant tank |
| for OE number | 1J0 121 321 B |
| Thread Size | M63 x 3,0 |
| Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Finger Follower, engine timing |
| Type | Finger Follower, engine timing |
| Replaces | 03564 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber |
| Inner diameter | 23 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Length | 48 mm |
| Outer diameter | 37 mm |
| Inner diameter | 17 mm |
| Placement on Vehicle | Front Axle, outer |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 390 mm |
| Height | 31 mm |
| Width | 148 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 102 mm |
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 76 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Placement on Vehicle | Rear Axle |
| Thickness | 5 mm |
| Number of Knobs | 1 |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 184 mm |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 43 mm |
| Inner diameter | 18 mm |
| Function | Mounting, stabiliser bar |
| Length | 42 mm |
| Width | 40 mm |
| Material | Rubber |
| Type | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 115 mm |
| Outer diameter | 70 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 12 mm |
| Filter type | Filter Insert |
| Seal Diameter | 79 mm |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 65 mm |
| Outer diameter | 54 mm |
| Inner diameter | 16 mm |
| Function | Mounting, control/trailing arm |
| Steering arm type | for semi-trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chemical Properties | not resistant to rapeseed oil |
| Length | 75 mm |
| Height | 54 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | Filter Insert, Pre-Filter, with water separator |
| Width | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 95 mm |
| Outer diameter | 72 mm |
| Inner diameter | 32 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 42 mm |
| Material | Rubber/Metal |
| Outer diameter | 38 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Hose |
| Type | Oil Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 42 mm |
| Outer diameter | 62 mm |
| Material | FPM (fluoride rubber) |
| Thickness | 7 mm |
| Placement on Vehicle | frontal sided |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 46 mm |
| Width | 44 mm |
| Material | Rubber/Metal |
| Thickness | 46 mm |
| Inner diameter | 19.5 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 20 mm |
| Function | Mounting Kit, stabiliser bar |
| Extra Description | ProKit |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, stabiliser bar (22794)
- 1x Febi Bracket, stabiliser mounting (23366)
- 1x Febi Fastening Bolt, stabiliser bar (29507)
Important compatibility info
| Inner diameter | 20 mm |
| Function | Mounting, stabiliser bar |
| Thickness | 41 mm |
| Outer diameter | 52 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Dipstick |
| Length from grip collar to min. marking | 476 mm |
| Length from grip collar to max. marking | 490 mm |
| Length | 560 mm |
| Type | Oil Dipstick |
| Colour | Orange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 68 mm |
| Outer diameter | 54 mm |
| Inner diameter | 14 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Pressure Switch |
| Switch point from | 0.3 bar |
| Switch point to | 0.6 bar |
| Length | 53 mm |
| Spanner Size | 24 |
| Number of Connectors / Ports | 2 |
| Shifting Points | 3 bar |
| External Thread Size | M10 x 1 |
| Housing Colour | Green |
| Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
| Length | 44 mm |
| Width | 36 mm |
| Material | Rubber |
| Thickness | 42 mm |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Width | 46 mm |
| Thickness | 49 mm |
| Inner diameter | 22 mm |
| Type | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 48 mm |
| Colour Coding | Green |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber |
| Function | Bellow, steering |
| Inner diameter 2 | 42 mm |
| Inner diameter 1 | 25 mm |
| Length | 180 mm |
| Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
| Housing Colour | black |
| for OE number | 191 945 515 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane) |
| Length | 100 mm |
| Placement on Vehicle | Front Axle |
| Function | Rubber Buffer, suspension |
| Width | 61 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Dipstick |
| Length from grip collar to min. marking | 522 mm |
| Length from grip collar to max. marking | 479 mm |
| Extra Description | febi Plus |
| Type | Oil Dipstick |
| Colour | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Rear Axle Left, Rear Axle Right |
| Length | 69 mm |
| Material | Rubber |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 68 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 1343.KX SK |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 737 mm |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































