Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.61
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 1020 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.58
Important compatibility info
| Colour | Grey |
| Number of Connectors / Ports | 10 |
| Combi Switch Function | with klaxon, with light dimmer function, with high beam function, with indicator function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 275 mm |
| Min. Length | 233 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Width | 62 mm |
| Thickness | 121 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 50 mm |
| Length | 1596 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1646 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle |
| Length | 1657 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Length | 580 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Function | Wiper Motor |
| Placement on Vehicle | Front |
| Type | Wiper Motor |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Function | Hydraulic Pump, steering |
| Length | 173 mm |
| Height | 123 mm |
| Width | 152 mm |
| Rotation Direction | Clockwise rotation |
| Mounting points diameter | 11 mm |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 50 10 600 046 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Width | 89 mm |
| Outer diameter | 123 mm |
| Type | Airbag Lifting Device Roll, lift axle |
| Function | Airbag Lifting Device Roll, lift axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Left Front |
| Max. Length | 305 mm |
| Min. Length | 285 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 50 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Additional Information 2 | with crown nut |
| Length | 908 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Cone Size | 28.6 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 40 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Thread Size | M10x1,5 |
| Transmission-side joint diameter | 93.5 mm |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.2 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 548 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Paired article numbers | 188146 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 627 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21303 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.57
Important compatibility info
| Function | Water Pump, engine cooling |
| Additional Information 2 | switchable water pump |
| Type | Water Pump, engine cooling |
| Number of Wings | 9 |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Pulleys | with belt pulley |
| Additional Information | with gasket/seal |
| Number of grooves | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.56
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 21810-2W200 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.51
Important compatibility info
| Height | 84 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.44
Important compatibility info
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Centering Diameter | 63.5 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Thickness | 48.2 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.43
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 80 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G67HR, G67HP |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17616)
- 1x Febi Tensioner, timing chain (12979)
£115.40
Important compatibility info
| Function | Wheel Bearing |
| Inner diameter | 78 mm |
| Bearing Type | Tapered Roller Bearing |
| Width | 90 mm |
| Outer diameter | 130 mm |
| Type | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.36
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 427 mm |
| Min. Length | 303 mm |
| Pipe Diameter | 63 mm. 73 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Replaces | 20342 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.33
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Extra Description | febi Plus |
| Type | Release Fork, clutch |
| Function | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.22
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Right |
| Height | 130 mm |
| Width | 350 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193023 |
| Port / Connector type | ASS2 7 pin |
| Number of Connectors / Ports | 7 |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with reflector (triangular), with taillight, without licence plate light |
| Depth | 120 mm |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.22
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Left |
| Height | 130 mm |
| Width | 350 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193022 |
| Port / Connector type | ASS2 7 pin |
| Number of Connectors / Ports | 7 |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with reflector (triangular), with taillight, without licence plate light |
| Depth | 120 mm |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.22
Important compatibility info
| Type | Bellow, air suspension |
| Thickness | 189 mm. 530 mm |
| Outer diameter | 285 mm. 261 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Additional Information | with piston |
| External Thread Size | M22 x 1,5, M16 x 2, M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.19
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 995 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023