Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 125 mm |
| Material | Rubber |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 92 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left, Rear, Front Axle Right |
| Material | Rubber/Metal |
| Thickness | 58 mm |
| Inner diameter | 16 mm |
| Function | Mounting, control/trailing arm |
| Outer diameter 2 | 68 mm |
| Outer diameter 1 | 60 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 20 mm |
| Function | Mounting, stabiliser bar |
| Thickness | 41 mm |
| Outer diameter | 52 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 68 mm |
| Outer diameter | 54 mm |
| Inner diameter | 14 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 48 mm |
| Material | Sheet Steel |
| Function | Bracket, stabiliser mounting |
| Paired article numbers | 40866 |
| Thickness | 70 mm |
| Placement on Vehicle | Front Axle Right |
| Length | 192 mm |
| Extra Description | febi Plus |
| Type | Bracket, stabiliser mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
| Length | 44 mm |
| Width | 36 mm |
| Material | Rubber |
| Thickness | 42 mm |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Grey |
| Number of Connectors / Ports | 2 |
| Function | Switch, clutch control (cruise control) |
| Type | Switch, clutch control (cruise control) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Switch, clutch control (cruise control) |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Type | Switch, clutch control (cruise control) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PU (Polyurethane) |
| Length | 100 mm |
| Placement on Vehicle | Front Axle |
| Function | Rubber Buffer, suspension |
| Width | 61 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 47 mm |
| Width | 46 mm |
| Thickness | 42.5 mm |
| Inner diameter | 18 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Rear Axle Left, Rear Axle Right |
| Length | 69 mm |
| Material | Rubber |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 68 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Material | Rubber |
| Thickness | 48 mm |
| Inner diameter | 20 mm |
| Width | 42 mm |
| Placement on Vehicle | Front Axle |
| Length | 39.7 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 1343.KX SK |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 40.5 mm |
| Thickness | 31 mm |
| Spanner Size | 46 |
| Function | Centering Sleeve, propshaft |
| Type | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 7 mm |
| Outer diameter | 42 mm |
| Inner diameter | 25 mm |
| Function | Shaft Seal, camshaft |
| Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 297 mm |
| Height | 42 mm |
| Width | 235 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hose Length | 240 mm |
| Outer diameter | 30 mm |
| Inner diameter | 21 mm |
| Colour | Black |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 942 506 32 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Dipstick |
| Length from grip collar to min. marking | 476 mm |
| Length from grip collar to max. marking | 490 mm |
| Length | 560 mm |
| Type | Oil Dipstick |
| Colour | Orange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with clamp |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 130 mm |
| Material | Rubber |
| Inner diameter 1 | 9 mm |
| Inner diameter 2 | 40 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (14083)
- 1x Febi Clamping Clip (38761)
Important compatibility info
| Function | Gasket, intake manifold |
| Type | Gasket, intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Radiator Hose |
| Inner diameter | 11 mm |
| Function | Radiator Hose |
| Hose Length | 135 mm |
| Wall Thickness | 4.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 4 mm |
| Type | Screw Plug, automatic transmission casing |
| Function | Screw Plug, automatic transmission casing |
| External Thread Size | M8 x 1 |
| Additional Information 2 | with seal ring |
| Length | 9.5 mm |
| Screw length below head | 7.5 mm |
| Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Intake Side, Exhaust Side |
| Valve type | for inlet valves, for exhaust valves |
| Type | Valve Guide |
| Function | Valve Guide |
| Material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 675 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 4 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Quality/ Grade | 8.8 |
| Type | Screw Plug, axle drive |
| Function | Screw Plug, axle drive |
| Screw length below head | 29 mm |
| Diameter 1 | 16 mm |
| Spanner Size | 8 |
| Bolt Head/Nut Design | Hexagon Socket |
| Surface | Zink flake coated |
| Material | Steel |
| External Thread Size | M10 x 1,5 |
| Additional Information | with gasket/seal |
| Length | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 65 mm |
| Outer diameter | 54 mm |
| Inner diameter | 16 mm |
| Function | Mounting, control/trailing arm |
| Steering arm type | for semi-trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 91 mm |
| Outer diameter | 77 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 19 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 27 mm |
| Width | 27 mm |
| Thickness | 21 mm |
| Number of Connectors / Ports | 5 |
| Relay function | Normally open contact |
| Function | Multifunctional Relay |
| Type | Multifunctional Relay |
| Replaces | 11931 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 2 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 105 mm |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 30 mm |
| Placement on Vehicle | Rear Axle, Rear |
| Material | Rubber/Metal |
| Outer diameter | 47 mm |
| Inner diameter | 14 mm |
| Function | Mounting, differential |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 36 mm |
| Outer diameter | 24.5 mm |
| Inner diameter | 12 mm |
| Thickness | 38 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Mounting, control/trailing arm |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 101 mm |
| Material | Rubber |
| Inner diameter 1 | 34 mm |
| Inner diameter 2 | 80 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without pre-filter |
| Length | 345 mm |
| Height | 70 mm |
| Width | 136 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow, drive shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 98 mm |
| Material | Rubber |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 56 mm |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Placement on Vehicle | Cylinder Head |
| Function | Coolant Flange |
| Material | Plastic |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 136.25 mm |
| Function | Gasket, oil pump |
| Number of mounting bores | 4 |
| Material | Sheet Steel |
| Height | 0.51 mm |
| Width | 92 mm |
| Type | Gasket, oil pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 46 mm |
| Width | 44 mm |
| Material | Rubber/Metal |
| Thickness | 46 mm |
| Inner diameter | 19.5 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| External Thread Size | M10 x 1 |
| Length | 200 mm |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 22 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Gasket inner diameter | 72.8 mm |
| Additional Information 2 | with seal ring |
| Height | 115 mm |
| Gasket outer diameter | 79.8 mm |
| Outer diameter | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Valve Spring |
| Function | Valve Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 54 mm |
| Material | Steel |
| Spanner Size | 17 |
| Thread Length | 18 mm |
| Quality/ Grade | 9.8 |
| Type | Wheel Bolt |
| Function | Wheel Bolt |
| Screw length below head | 27 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| for OE number | BRK FITTING KIT 151 |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, control/trailing arm |
| Outer diameter | 44 mm. 37 mm |
| Thickness | 55 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Lower Front Axle, Front |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M20 x 1,5 |
| Height | 90 mm |
| Outer diameter | 79 mm |
| Filter type | Spin-on Filter |
| Seal Diameter | 72.3 mm |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 82 mm |
| Outer diameter | 33 mm |
| Inner diameter | 16 mm |
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, manual transmission housing |
| Outer diameter | 32 mm |
| Thickness | 8.2 mm |
| Inner diameter | 22 mm |
| Colour | Brown |
| Type | Gasket, manual transmission housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 76 mm |
| Outer diameter | 65 mm |
| Inner diameter | 22 mm |
| Filter type | Filter Insert |
| Seal Diameter | 74.5 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































