Important compatibility info
Weight | 6.9 kg |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Front Axle |
Length | 821 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.220 kg |
Length | 215 mm |
Height | 25 mm |
Width | 196 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 176764 |
Weight | 0.68 kg |
Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.090 kg |
Cable Length | 503 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 1.313 kg |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thickness | 61 mm |
Weight | 0.156 kg |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Inner diameter | 12.4 mm |
Material | Rubber/Metal |
Outer diameter | 60.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 197156 |
Weight | 0.201 kg |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 1.71 kg |
Paired article numbers | 181888 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Aluminium |
Brake caliper piston diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Weight | 1.507 kg |
Steering arm type | Control Arm, Triangular Control Arm (CV) |
Placement on Vehicle | Front Axle Right, Upper |
Additional Information 2 | with ball joint |
Paired article numbers | 182235 |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 20 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Placement on Vehicle | both sides |
Length | 507 mm |
Housing Diameter | 19 mm |
Eject Force | 420 N |
Stroke | 206 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 278.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Length | 109 mm |
Material | Thermoplast |
Inner diameter 1 | 26 mm |
Inner diameter 2 | 78 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03596)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Circlip (03185)
- 1x Febi Spring Washer (07254)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 1.87 kg |
Placement on Vehicle | Front Axle |
Length | 138 mm |
Width | 59.4 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 19 |
Quality/ Grade | 10.9 |
Function | Bolt, crankshaft mounting bracket |
Screw length below head | 78 mm |
Weight | 0.094 kg |
Type | Bolt, crankshaft mounting bracket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
ABS Ring Diameter | 76 mm |
External Teeth, Wheel Side | 23 |
Internal Teeth, wheel side | 19 |
Weight | 1.508 kg |
Number of Teeth, ABS ring | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 110 mm |
Weight | 0.49 kg |
Mounting bores distance | 65 mm |
Fill Medium | Brake Fluid |
Type | Shift Cylinder |
Function | Shift Cylinder |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Placement on Vehicle | Front Axle |
Material | Rubber |
Outer diameter | 48 mm |
Thickness | 32.3 mm |
Inner diameter | 20 mm. 15.8 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Fitting, intake manifold |
Type | Fitting, intake manifold |
Weight | 1.373 kg |
Additional Information | without adjusting element, with gasket/seal |
Additional Information 2 | with bolts/screws |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.052 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber |
Function | Bellow, steering |
Inner diameter 2 | 49 mm |
Inner diameter 1 | 10 mm |
Length | 178 mm |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.180 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.267 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Metal |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023