Important compatibility info
Additional Information | with gaskets/seals |
Type | EGR Valve |
Function | EGR Valve |
Weight | 0.608 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top pin, Bottom Yoke |
Max. Length | 400 mm |
Min. Length | 361 mm |
Pipe Diameter | 62 mm. 45 mm |
Piston conrod diameter | 18 mm |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M14 x 1,5 |
Weight | 3.6 kg |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Alternator Charge Current | 90 A |
Belt Pulley Diameter | 49 mm |
Weight | 4.52 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 465 mm |
Placement on Vehicle | Rear Axle |
Thickness | 102 mm |
Diameter | 85 mm |
Rod/Strut | Coupling Rod |
Weight | 4.499 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M16x1,5 |
Bore Diameter | 8.5 mm |
External Teeth, Wheel Side | 36 |
Weight | 5.684 kg |
Number of mounting bores | 6 |
Min. Length | 472 mm |
Wheel Sided Joint Diameter | 89.5 mm |
Transmission-side joint diameter | 100 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing |
Inner diameter | 78 mm |
Bearing Type | Tapered Roller Bearing |
Width | 90 mm |
Outer diameter | 130 mm |
Weight | 4.45 kg |
Type | Wheel Bearing |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Right |
External Teeth, Wheel Side | 31 |
Thread Size | M24x2,0 |
Min. Length | 1093 mm |
External Teeth, Diff.Side | 41 |
Weight | 13.440 kg |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 99 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | Basic Short Kit |
for OE number | 1 102 609 S5 |
Weight | 2.180 kg |
Chain Type | Duplex, Closed chain |
Number of Chain Links | 132 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (36294)
- 1x Febi Tensioner, timing chain (36296)
- 1x Febi Guide, timing chain (40146)
- 1x Febi Guide, timing chain (36292)
- 1x Febi Guide, timing chain (170791)
- 1x Febi Guide, timing chain (170761)
Important compatibility info
Function | Drive Shaft |
Transmission-side joint diameter | 99 mm |
Type | Drive Shaft |
Wheel Sided Joint Diameter | 98 mm |
Min. Length | 755 mm |
External Teeth, Diff.Side | 41 |
Weight | 9.930 kg |
External Teeth, Wheel Side | 31 |
Thread Size | M24x2,0 |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Upper Left |
Cone Size | 18 mm |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Steering arm type | Triangular Control Arm (CV) |
Paired article numbers | 179576 |
Weight | 1.958 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 57 mm |
Weight | 5.0 kg |
Current Strength | 70 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.958 kg |
Cone Size | 18 mm |
Paired article numbers | 179577 |
Additional Information | with rubber mounts |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Steering arm type | Triangular Control Arm (CV) |
Placement on Vehicle | Front Axle, Upper Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.78 kg |
Material | Grey Cast Iron |
Number of Wings | 12 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Replaces | 03584 |
Additional Information | with gaskets/seals |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
Weight | 0.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Core Length | 370 mm |
Core Width | 179 mm |
Core Depth | 32 mm |
Function | Heat Exchanger, interior heating |
Type | Heat Exchanger, interior heating |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.2 kg |
Placement on Vehicle | Front Axle |
Length | 532 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Pressure Rod |
Pipe Diameter | 48 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Clutch, radiator fan |
Weight | 1.000 kg |
Type | Clutch, radiator fan |
Hole Spacing | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.451 kg |
Placement on Vehicle | Exhaust Side |
Function | Camshaft |
Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.800 kg |
Mounting points diameter | 10 mm |
Type | Manifold, exhaust system |
Function | Manifold, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 14 mm. 35 mm |
Pipe Diameter | 45 mm |
Placement on Vehicle | Front |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Mechanical |
Weight | 3.8 kg |
Min. Length | 103 mm |
Max. Length | 362 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023