Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Seal Diameter | 67 mm |
Internal Teeth, wheel side | 32 |
Weight | 2.730 kg |
Outer diameter | 93 mm |
External Teeth, Wheel Side | 24 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Length | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Length | 1190 mm |
Alternator type | for starter generator |
Tensile Cord Material | Aramid |
Type | V-Ribbed Belt Set |
Weight | 1.283 kg |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184952)
- 1x Febi Belt Tensioner, v-ribbed belt (183536)
Important compatibility info
Type | Clutch Booster |
Fill Medium | Brake Fluid (only DOT 3), Brake Fluid (only DOT 4) |
Function | Clutch Booster |
Weight | 2.256 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Securing Plate, ball joint |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.027 kg |
Type | Securing Plate, ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Window Regulator |
Weight | 1.0 kg |
Paired article numbers | 175798 |
Operating Mode | Electric |
Additional Information | without electric motor |
Function | Window Regulator |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 30 mm |
Thickness | 35 mm |
Inner diameter | 27 mm |
Colour | White |
Placement on Vehicle | Front Axle |
Weight | 0.2 kg |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.281 kg |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Outer diameter | 55 mm. 32 mm |
Thickness | 50 mm |
Inner diameter | 18 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 16 mm |
Placement on Vehicle | Front Axle |
Weight | 0.216 kg |
Function | Mounting Kit, stabiliser bar |
Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (27638)
- 1x Febi Bracket, stabiliser mounting (37148)
- 1x Febi Bracket, stabiliser mounting (37147)
- 4x Febi Screw (37063)
Important compatibility info
Weight | 0.32 kg |
Placement on Vehicle | Front Axle Left |
Length | 219 mm |
Material | Steel |
Paired article numbers | 31108 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 9 mm |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 11.2 mm |
Weight | 0.388 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
External Thread Size | M14 x 1,5 |
Function | Ball Joint |
Cone Size | 18.5 mm |
Additional Information | with lock nut |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.669 kg |
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 37292 |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (31253)
- 1x Febi Control/Trailing Arm, wheel suspension (37197)
Important compatibility info
Material | Sheet Steel |
Steering arm type | Triangular Control Arm (CV) |
Paired article numbers | 37611 |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.128 kg |
Type | Sealing Set, air compressor |
Function | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 4.85 kg |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 266 mm |
Thickness | 34 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 66 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65.4 mm |
Operating Mode | Mechanical |
Housing material | Metal |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.32 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.304 kg |
Placement on Vehicle | Right Rear, Left Rear |
Function | Cable Pull, parking brake |
Length | 1445 mm |
Type | Cable Pull, parking brake |
for OE number | 1K0 609 721 BE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.394 kg |
Placement on Vehicle | Front Axle |
Length | 46 mm |
Width | 57 mm |
Material | Rubber/Metal |
Outer diameter | 57 mm |
Thickness | 57 mm |
Inner diameter | 18 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 292 mm |
Height | 71 mm |
Width | 177 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Weight | 0.39 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Length | 224 mm |
Height | 17 mm |
Width | 202 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 19 mm |
Type | Brake Pad Set, disc brake |
Weight | 1.939 kg |
Placement on Vehicle | Front Axle |
Length | 137 mm |
Width | 57.5 mm |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 17.8 mm |
Length | 123 mm |
Weight | 1.42 kg |
Function | Brake Pad Set, disc brake |
Width | 53.3 mm |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle |
Wear Warning Contact | excl. wear warning contact |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 723 mm |
Min. Length | 443 mm |
Mounting points diameter | 20 mm |
Pipe Diameter | 73 mm. 63.5 mm |
Weight | 6.36 kg |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
for OE number | 006 326 60 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.172 kg |
Length | 1687 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.66 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 280 mm |
Thickness | 47 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.185 kg |
Filter type | Filter Insert |
Function | Fuel filter |
Type | Fuel filter |
Height | 164 mm |
Outer diameter | 92 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 70 mm |
Spanner Size | 32 |
Function | Sensor, driver cab tilting device |
External Thread Size | M22 x 1 |
Weight | 0.080 kg |
Type | Sensor, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Steel |
Function | Mount, exhaust system |
Type | Mount, exhaust system |
Weight | 0.185 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
ABS Ring Diameter | 81 mm |
Number of Teeth, ABS ring | 45 |
Weight | 2.426 kg |
Internal Teeth, wheel side | 27 |
External Teeth, Wheel Side | 33 |
Thread Size | M14x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 32 mm |
Width | 120 mm |
Outer diameter | 90 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Weight | 1.047 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023