Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Rubber Buffer, muffler |
| Weight | 0.085 kg |
| Function | Rubber Buffer, muffler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.42
Important compatibility info
| Weight | 0.01 kg |
| Outer diameter | 16 mm |
| Function | Frost Plug |
| Extra Description | febi Plus |
| Type | Frost Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.42
Important compatibility info
| Length | 19 mm |
| Width | 5 mm |
| Thickness | 16 mm |
| Function | Retaining Clip, bonnet noise insulation |
| Weight | 0.05 kg |
| Type | Retaining Clip, bonnet noise insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.42
Important compatibility info
| Outer diameter | 21 mm |
| Material | Steel |
| Function | Wheel Nut |
| Wheel Fastening | Conical Seat F |
| Quality/ Grade | 8 |
| Tightening Torque | 110 Nm |
| Bolt Head/Nut Design | Male Hex |
| Surface | Zinc-coated |
| Spanner Size | 21 |
| Thickness | 17 mm |
| Weight | 0.021 kg |
| Internal Thread Size | M12 x 1,5 |
| Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.40
Important compatibility info
| Weight | 0.001 kg |
| Function | Seal Ring, oil drain plug |
| Thickness | 2 mm |
| Inner diameter | 18 mm |
| Outer diameter | 22 mm |
| Material | NBR (nitrile butadiene rubber) |
| Type | Seal Ring, oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.40
Important compatibility info
| Material | ACM (Polyacrylate) |
| Outer diameter | 47 mm |
| Thickness | 6 mm. 7 mm |
| Inner diameter | 29.9 mm |
| Rotation Direction | Clockwise rotation |
| Weight | 0.016 kg |
| Function | Shaft Seal, manual transmission main shaft |
| Type | Shaft Seal, manual transmission main shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.40
Important compatibility info
| Rims | for steel rims |
| Screw length below head | 26 mm |
| Outer diameter | 19 mm |
| Weight | 0.05 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 47 mm |
| Material | Steel |
| Spanner Size | 17 |
| Surface | Zink flake coated |
| Thread Length | 18 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 8.8 |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Bolt |
| External Thread Size | M12 x 1,25 |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.39
Important compatibility info
| Weight | 0.012 kg |
| Material | ACM (Polyacrylate) |
| Inner diameter | 8 mm |
| Colour | Black |
| Function | Seal Ring, valve stem |
| Type | Seal Ring, valve stem |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.38
Important compatibility info
| Weight | 0.017 kg |
| Material | Rubber/Metal |
| Inner diameter | 9 mm |
| Function | Seal Ring, valve stem |
| Type | Seal Ring, valve stem |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.38
Important compatibility info
| Internal Thread Size | M6 x 0,75 |
| Bolt Head/Nut Design | Male Hex |
| Function | Counter Nut, valve clearance adjusting screw |
| DIN / ISO | 934 |
| Type | Counter Nut, valve clearance adjusting screw |
| Weight | 0.002 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.38
Important compatibility info
| Weight | 0.0052 kg |
| Material | Spring Steel |
| Bolt / Nut Version | Sheet Metal Nut |
| Function | Retaining Clip, bonnet noise insulation |
| Type | Retaining Clip, bonnet noise insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.36
Important compatibility info
| Outer diameter | 21 mm |
| Material | Steel |
| Internal Thread Size | M12 x 1,25 |
| Weight | 0.021 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Thickness | 16 mm |
| Spanner Size | 21 |
| Surface | Zinc-coated |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 6 |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Nut |
| Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.36
Important compatibility info
| Length | 13 mm |
| Width | 19.8 mm |
| Thickness | 15.8 mm |
| Function | Holding Clip, interior panels |
| Weight | 0.002 kg |
| Type | Holding Clip, interior panels |
| Material | Spring Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.35
Important compatibility info
| Material | FPM (fluoride rubber) |
| Outer diameter | 13 mm |
| Thickness | 2.5 mm |
| Inner diameter | 8 mm |
| Function | Seal, fuel line |
| Weight | 0.005 kg |
| Type | Seal, fuel line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.35
Important compatibility info
| Weight | 0.066 kg |
| Rims | for steel rims |
| Outer diameter | 24.4 mm |
| Screw length below head | 19 mm |
| Function | Wheel Bolt |
| Wheel Fastening | Ball seat A/G |
| Quality/ Grade | 10.9 |
| Bolt Head/Nut Design | Male Hex |
| Thread Length | 19 mm |
| Surface | Phosphatized |
| Spanner Size | 19 |
| Material | Steel |
| Length | 38 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Type | Wheel Bolt |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.34
Important compatibility info
| Colour | Black |
| Length | 31 mm |
| Material | Plastic |
| Outer diameter | 13 mm |
| Function | Expanding Rivet |
| Weight | 0.001 kg |
| Bore Diameter | 8 mm |
| Type | Expanding Rivet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.34
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 43.3 mm |
| Thickness | 3.5 mm |
| Inner diameter | 36.3 mm |
| Function | Seal Ring, coolant hose |
| Weight | 0.001 kg |
| Type | Seal Ring, coolant hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.34
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 45 mm |
| Thickness | 3 mm |
| Inner diameter | 39 mm |
| Function | Seal Ring, injector shaft |
| Weight | 0.005 kg |
| Type | Seal Ring, injector shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.34
Important compatibility info
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 10 |
| Function | Nut |
| Spanner Size | 13 |
| Thickness | 7.7 mm |
| Surface | Copper coated |
| Weight | 0.015 kg |
| Internal Thread Size | M8 x 1,25 |
| Material | Steel |
| Type | Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.32
Important compatibility info
| Colour | White |
| Outer diameter 1 | 13 mm |
| Outer diameter 2 | 18 mm |
| Function | Retaining Clip, underbody panelling |
| Weight | 0.001 kg |
| Length | 18 mm |
| Material | Plastic, POM (Polyoxymethylene) |
| Extra Description | febi Plus |
| Type | Retaining Clip, underbody panelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.32
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023