Proud to be a UK-based company
Contact us
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| for OE number | 21 52 6 758 820 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 134 mm |
| Outer diameter | 134 mm |
| Inner diameter | 60 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| Belt Pulley Diameter | 49 mm |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Number of Ribs | 6 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Pressure | 180 bar |
| Internal Thread Size | M26 x 1,5, M18 x 1,5 |
| Function | Hydraulic Pump, steering |
| Mounting points diameter | 11 mm |
| Type | Hydraulic Pump, steering |
| Hole Spacing | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.53
Important compatibility info
| Thread Size | M27x1,5 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 971 mm |
| Wheel Sided Joint Diameter | 86.2 mm |
| Transmission-side joint diameter | 81.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.53
Important compatibility info
| Type | High-pressure Pump |
| Function | High-pressure Pump |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.52
Important compatibility info
| Voltage | 12 V |
| Type | Starter |
| Number of Teeth | 10 |
| Rated Power | 2.0 kW |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.50
Important compatibility info
| Material | Steel |
| Length | 743 mm |
| Number of Connectors / Ports | 6 |
| Capacity | 40 l |
| Operating Pressure | 15 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 276 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 95 mm |
| Outer diameter | 140 mm |
| Additional Information 2 | with ABS sensor ring |
| Inner diameter | 50 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.43
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Pipe Diameter | 66 mm. 59 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 802 mm |
| Min. Length | 483 mm |
| Replaces | 20546 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.42
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 333 mm |
| Thickness | 55.4 mm |
| Brake Disc Thickness | 32.5 mm |
| Minimum thickness | 28.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.38
Important compatibility info
| Placement on Vehicle | Intake Side |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.37
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Number of mounting bores | 3 |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.32
Important compatibility info
| Parameter | Typ 44 |
| Internal Thread Size | M22 x 1,5 |
| Type | Diaphragm Brake Cylinder |
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Thread | M20 x 1,5 |
| Stroke | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.29
Important compatibility info
| Material | Plastic |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.27
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 36 |
| Min. Length | 1057 mm |
| ABS Ring Diameter | 105 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.27
Important compatibility info
| Height | 93 mm |
| Outer diameter | 94 mm |
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.24
Important compatibility info
| Length | 479 mm |
| Height | 175 mm |
| Width | 296 mm |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.24
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 102 mm |
| Transmission-side joint diameter | 95.5 mm |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 650 mm |
| Paired article numbers | 182959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.23
Important compatibility info
| Number of grooves | 7 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Housing material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.22
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 176657 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.22
Important compatibility info
| for OE number | 81.27203.6020 |
| Number of Connectors / Ports | 2. 4 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 610 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.19
Important compatibility info
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M16 x 1,5 |
| Inner diameter | 15 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.17
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 39 mm |
| Operating Mode | Automatic |
| Number of Ribs | 10 |
| Outer diameter | 78 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Function | Multi-circuit Protection Valve |
| Internal Thread Size | 7 x M22 x 1,5, 2 x M12 x 1,5 |
| Type | Multi-circuit Protection Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Core Length | 370 mm |
| Core Width | 179 mm |
| Core Depth | 32 mm |
| Function | Heat Exchanger, interior heating |
| Type | Heat Exchanger, interior heating |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Additional Information 2 | with screw |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 863 mm |
| Transmission-side joint diameter | 81 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M10 x 1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 981 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 93.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 479 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Max. Length | 801 mm |
| Replaces | 20398 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.10
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 268 mm |
| Thickness | 73.3 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 65 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.10
Important compatibility info
| Function | Cable Pull, manual transmission |
| for OE number | 81.32655.6311 |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 2845 mm |
| Outer length 1 | 3190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.10
Important compatibility info
| Paired article numbers | 174697 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Material | Aluminium |
| Paired article numbers | 174696 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 51 mm |
| Outer diameter | 88 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Outer diameter 1 | 79 mm |
| Outer diameter 2 | 143 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.04
Important compatibility info
| External Thread Size | M8 x 1,25, M22 x 1,5 |
| Placement on Vehicle | non-steered trailing axle |
| Outer diameter | 286 mm |
| Thickness | 262 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.00
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.99
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 168 mm |
| Thickness | 188 mm. 560 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M10 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.99
Important compatibility info
| Min. Length | 569 mm |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 107.8 mm |
| Number of mounting bores | 6 |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.99
Important compatibility info
| Placement on Vehicle | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.98
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M14x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.2 mm |
| External Teeth, Wheel Side | 33 |
| Number of mounting bores | 6 |
| Min. Length | 633 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.96
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of Wings | 5 |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.90
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 789 mm |
| Wheel Sided Joint Diameter | 71.9 mm |
| Transmission-side joint diameter | 72 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.89
Important compatibility info
| Additional Information 2 | with Temperature Switch |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 87 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.85
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.84
Important compatibility info
| Surface | Coated |
| Number of Teeth | 160 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 03L 198 119 F S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37021)
- 1x Febi Water Pump, engine cooling (36048)
£110.84
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14522 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.83
Important compatibility info
| Number of grooves | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| for OE number | 58 0193 1312 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.81
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| for OE number | 12 41 8 515 900 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.73
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.71
Important compatibility info
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Spanner Size | 22 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
| Cable Length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023