Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 2 |
| Additional Information 2 | with brake fluid reservoir |
| Operating Mode | Hydraulic |
| Weight | 0.780 kg |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.41
Important compatibility info
| Weight | 0.16 kg |
| Number of Connectors / Ports | 4 |
| Inner diameter | 63 mm |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Outer diameter | 70 mm |
| Material | Plastic |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.39
Important compatibility info
| Number of Wings | 7 |
| Material | Grey Cast Iron |
| Number of Teeth | 23 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Weight | 4.17 kg |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.36
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 612 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.32
Important compatibility info
| Weight | 11.5 kg |
| Placement on Vehicle | Rear Axle |
| Length | 575 mm |
| Steering arm type | Trailing Arm, Triangular Control Arm (CV) |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.29
Important compatibility info
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 258 mm. 178 mm |
| Thickness | 280 mm. 130 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 2 |
| Weight | 8.53 kg |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.24
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Weight | 4.44 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber |
| Piston conrod diameter | 15 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Max. Length | 605 mm |
| Min. Length | 364 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.23
Important compatibility info
| Extra Description | febi Plus |
| Function | Dosing Module, urea injection |
| Type | Dosing Module, urea injection |
| Weight | 0.283 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.22
Important compatibility info
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Weight | 2.088 kg |
| Type | Expansion Tank, coolant |
| Additional Information | with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.21
Important compatibility info
| Minimum thickness | 38 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Surface | Coated |
| Function | Brake Disc |
| Number of Holes | 10 |
| Thickness | 99 mm |
| Weight | 23.9 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.13
Important compatibility info
| Weight | 1.66 kg |
| Width | 168 mm |
| Outer diameter | 168 mm |
| Inner diameter | 13 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.09
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 205 mm. 228 mm |
| Thickness | 340 mm |
| Weight | 8.3 kg |
| External Thread Size | M14 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.05
Important compatibility info
| Number of spring leaves | 1 |
| Length | 695 mm. 672 mm |
| Function | Spring Pack |
| Type | Spring Pack |
| Weight | 12.2 kg |
| Spring Design | Leaf spring |
| Width | 57 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.04
Important compatibility info
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 112 |
| Chain Type | Simplex, Closed chain |
| Weight | 1.021 kg |
| for OE number | 11 31 1 485 400 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31803)
- 1x Febi Tensioner, timing chain (37587)
- 1x Febi Guide, timing chain (37586)
- 1x Febi Guide, timing chain (37588)
- 1x Febi Screw Plug, timing chain tensioner (37589)
- 1x Febi Gear/Sprocket, camshaft (177237)
- 1x Febi Sprocket, crankshaft (177084)
- 1x Febi Shaft Seal, crankshaft (177734)
£107.01
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 10.8 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 365 mm |
| Thickness | 75 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 17 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.98
Important compatibility info
| Weight | 0.873 kg |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49713)
- 1x Febi Tensioner, timing chain (170098)
- 1x Febi Guide, timing chain (170101)
- 1x Febi Guide, timing chain (170103)
£106.97
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 4.4 kg |
| Outer diameter | 81 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Width | 136 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.89
Important compatibility info
| Weight | 7.128 kg |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 22 |
| Min. Length | 973 mm |
| ABS Ring Diameter | 86 mm |
| Wheel Sided Joint Diameter | 76.3 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.81
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 202 mm |
| Thickness | 240 mm. 600 mm |
| External Thread Size | M12 x 1,75, M20 x 1,5, M16 x 2 |
| Weight | 9.5 kg |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.80
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 228 mm |
| Thickness | 290 mm. 500 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Weight | 9.1 kg |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.75
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023