Proud to be a UK-based company
Contact us
Important compatibility info
| for OE number | 21100904 |
| Number of Connectors / Ports | 2. 3 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 687 mm |
| Weight | 0.820 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£109.00
Important compatibility info
| Height | 93 mm |
| Outer diameter | 94 mm |
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
| Weight | 0.164 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.99
Important compatibility info
| Material | Steel |
| Length | 827 mm |
| Outer diameter | 206 mm |
| Number of Connectors / Ports | 4 |
| Function | Air Tank, compressed-air system |
| Weight | 9.9 kg |
| Capacity | 25 l |
| Operating Pressure | 15.5 bar |
| Type | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.94
Important compatibility info
| Internal Thread Size | 1 x M26 x 1,5, 3 x M16 x 1,5 |
| Weight | 2.743 kg |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Pressure | 180 bar |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| for OE number | 002 460 08 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.91
Important compatibility info
| Mounting points diameter | 19 mm |
| Hole Spacing | 115 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 569 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 46 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 7.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.91
Important compatibility info
| Weight | 4.03 kg |
| Function | Shock Absorber |
| Mounting points diameter | 16 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Min. Length | 400 mm |
| Max. Length | 615 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.89
Important compatibility info
| Number of Connectors / Ports | 6 |
| Weight | 1.0 kg |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.81
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.293 kg |
| for OE number | 22 11 6 860 482 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.72
Important compatibility info
| Weight | 11.1 kg |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 953 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M38 x 1,5 LHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.69
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm. 239 mm |
| Thickness | 192 mm. 483 mm |
| External Thread Size | M22 x 1,5 |
| Function | Bellow, air suspension |
| Weight | 10.01 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.69
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 16 mm |
| Shock Absorber Type | Gas Pressure |
| External Thread Size | M14 x 1,5 |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Pipe Diameter | 60 mm |
| Function | Shock Absorber |
| Weight | 6.227 kg |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Max. Length | 688 mm |
| Min. Length | 499 mm |
| Type | Shock Absorber |
| Piston conrod diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.68
Important compatibility info
| Outer diameter | 192 mm |
| Width | 48 mm |
| Inner diameter | 24 mm |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 5 |
| Weight | 3.900 kg |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Replaces | 26338 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.68
Important compatibility info
| Weight | 6.66 kg |
| Voltage | 12 V |
| Function | Alternator |
| Type | Alternator |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.67
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 1.49 kg |
| Width of castor bearing surface | 33.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.65
Important compatibility info
| Parameter | 6PK |
| Additional Information 2 | with bolts/screws |
| Weight | 3.400 kg |
| Material | Rubber/Metal |
| Outer diameter | 185 mm |
| Number of Ribs | 5 |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 45 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (37419)
- 4x Febi Centering Bolt, crankshaft pulley (33076)
£108.65
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2. 10 |
| Weight | 0.304 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.65
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| Cone Size | 31.5 mm |
| Driver Position | for right-hand drive vehicles |
| Outer diameter | 50 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Weight | 14.5 kg |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Length | 1822 mm |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Paired article numbers | 179342 |
| Weight | 0.7 kg |
| Number of Connectors / Ports | 6 |
| Function | Electric Motor, window regulator |
| Placement on Vehicle | Right |
| Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Type | Electric Motor, window regulator |
| Weight | 0.7 kg |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Left |
| Function | Electric Motor, window regulator |
| Paired article numbers | 179340 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Operating Mode | Electric-pneumatic |
| Valve type | Solenoid Valve |
| Function | EGR valve, exhaust control |
| Weight | 0.4 kg |
| Type | EGR valve, exhaust control |
| for OE number | 51.25902.0130 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Weight | 0.478 kg |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Bore Diameter | 24 mm |
| for OE number | 81.30715.6152 |
| Fill Medium | Mineral Oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Outer diameter | 198.5 mm |
| Inner diameter | 45 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 6.54 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| Weight | 7.122 kg |
| External Teeth, Diff.Side | 24 |
| Min. Length | 870 mm |
| Wheel Sided Joint Diameter | 86.1 mm |
| Transmission-side joint diameter | 80.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Weight | 2.537 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 441 mm |
| Core Width | 608 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 6 |
| Material | Grey Cast Iron |
| Weight | 7.915 kg |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 160 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
| Weight | 1.805 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (34127)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (17712)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (24754)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21708)
- 1x Febi Tensioner Pulley, timing belt (30215)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (177915)
£108.62
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Weight | 3.9 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 26720 |
| Function | Window Regulator |
| Additional Information | without electric motor |
| Type | Window Regulator |
| Weight | 1.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.8 kW |
| Weight | 3.85 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Weight | 1.5 kg |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Weight | 1.392 kg |
| Material | Plastic |
| Colour | Black |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 145 mm |
| Outer diameter | 145 mm |
| Thickness | 90 mm |
| Bolt Hole Circle Diameter | 67 mm |
| Function | Wheel Bearing Kit |
| Weight | 2.668 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (24994)
- 1x Febi Wheel Bearing (05417)
- 1x Febi Anti-friction Bearing Grease (28194)
£108.60
Important compatibility info
| Weight | 0.956 kg |
| Inner length 1 | 778 mm |
| Inner length 2 | 798 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1112 mm |
| Outer length 2 | 1139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Weight | 0.918 kg |
| Chain Type | Simplex, Closed chain |
| Timing Chain Size | G53HR |
| Number of Chain Links | 114 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (37766)
- 1x Febi Tensioner, timing chain (49378)
- 1x Febi Guide, timing chain (49380)
- 1x Febi Guide, timing chain (49379)
- 1x Febi Gear/Sprocket, camshaft (178894)
- 1x Febi Sprocket, crankshaft (178532)
- 1x Febi Shaft Seal, crankshaft (174637)
£108.60
Important compatibility info
| Weight | 1.709 kg |
| Length | 516 mm |
| Height | 145 mm |
| Width | 289 mm |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Weight | 0.254 kg |
| Type | Solenoid Valve, retarder |
| Length | 90 mm |
| Thickness | 40 mm |
| Function | Solenoid Valve, retarder |
| Width | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.59
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 0.870 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.57
Important compatibility info
| Number of Teeth | 9 |
| Voltage | 12 V |
| Rated Power | 1.7 kW |
| Function | Starter |
| Type | Starter |
| Weight | 3.68 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.56
Important compatibility info
| Number of Teeth | 11 |
| Weight | 4.12 kg |
| Rated Power | 2.3 kW |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.55
Important compatibility info
| Type | Spring Pack |
| Length | 694 mm. 674 mm |
| Placement on Vehicle | Rear Axle |
| Number of spring leaves | 1 |
| Width | 70 mm |
| Spring Design | Leaf spring |
| Weight | 15.0 kg |
| Function | Spring Pack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.55
Important compatibility info
| Weight | 0.120 kg |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.55
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 2.32 kg |
| Length | 433 mm |
| Spanner Size | 19 |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.54
Important compatibility info
| Additional Information | with gaskets/seals, with oil filter, with oil cooler |
| Additional Information 2 | with pressure sensor |
| Weight | 1.7 kg |
| for OE number | 03N 115 389 M |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.53
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.7 kW |
| Weight | 4.2 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.52
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Surface | Coated |
| Number of Teeth | 163 |
| Type | Water Pump & Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Width | 24 mm |
| Weight | 1.302 kg |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30792)
- 1x Febi Water Pump, engine cooling (10599)
£108.51
Important compatibility info
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 824 mm |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Weight | 8.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.50
Important compatibility info
| Weight | 6.35 kg |
| Type | Shock Absorber |
| Piston conrod diameter | 20 mm |
| Max. Length | 890 mm |
| Min. Length | 525 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.48
Important compatibility info
| Outer diameter | 380 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 180 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle, Front Axle |
| Weight | 20.0 kg |
| Internal Thread Size | M18 x 1,5 |
| Rim Hole Number | 8 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.43
Important compatibility info
| Weight | 4.7 kg |
| Placement on Vehicle | Rear Axle Right |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 122 mm. 385 mm |
| Paired article numbers | 102721 |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| External Thread Size | M7 x 1, M10 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.41
Important compatibility info
| Function | Cylinder Head, air compressor |
| Weight | 2.2 kg |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.40
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023