Important compatibility info
Weight | 0.132 kg |
Height | 200 mm |
Outer diameter | 76 mm |
Filter type | Filter Insert |
Type | Oil Filter |
Function | Oil Filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 72 mm |
Joint Type | Tripod Joint |
Weight | 0.221 kg |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 26 mm |
Material | NBR (nitrile butadiene rubber) |
Length | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176426)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Spanner Size | 22 |
Weight | 0.104 kg |
Cable Length | 803 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Weight | 4.195 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
Type | Switch, reverse light |
Function | Switch, reverse light |
Weight | 0.04 kg |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Placement on Vehicle | Front Axle |
Weight | 0.039 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Weight | 0.038 kg |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Iron |
Paired article numbers | 182274 |
Brake caliper piston diameter | 38 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 1.48 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.098 kg |
Function | Repair Kit, automatic clutch adjustment |
Type | Repair Kit, automatic clutch adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.051 kg |
Spanner Size | 29 |
Number of Connectors / Ports | 3 |
Temperature range from | 100 °C. 110 °C |
Temperature range to | 94 °C. 95 °C |
Function | Temperature Switch, radiator fan |
External Thread Size | M22 x 1,5 |
Type | Temperature Switch, radiator fan |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Opening Temperature | 80 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (17904)
- 1x Febi Seal, thermostat (17966)
Important compatibility info
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 0.780 kg |
Placement on Vehicle | Front |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 30 mm |
Outer diameter | 156 mm |
Inner diameter | 25 mm |
Weight | 1.454 kg |
Parameter | 7PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Material | Rubber |
Width | 47 mm |
Length | 51.7 mm |
Placement on Vehicle | Rear Axle |
Type | Mounting, stabiliser bar |
Weight | 0.07 kg |
Inner diameter | 22 mm |
Thickness | 44.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bonnet Lock |
Function | Bonnet Lock |
Weight | 0.38 kg |
Extra Description | febi Plus |
Length | 137 mm |
Width | 78 mm |
Height | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 28 mm. 17 mm |
Thickness | 34 mm |
Inner diameter | 10 mm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Lower Front Axle |
Weight | 0.075 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Type | Oil sump |
Weight | 1.915 kg |
Spanner Size | 24 |
Additional Information 2 | with seal ring |
Length | 400 mm |
Additional Information | with oil drain plug |
Extra Description | febi Plus |
External Thread Size | M16 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Placement on Vehicle | Front Axle |
Length | 79 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Inner diameter | 25 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Material | Metal |
Weight | 0.200 kg |
Length | 85 mm |
Placement on Vehicle | Front Axle |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.073 kg |
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Thickness | 112 mm |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.15 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 110 mm |
Material | Aluminium |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 1.313 kg |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing, with fastening material |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (15870)
- 3x Febi Clamping Bolt, ball joint (07866)
- 1x Febi Nut (37956)
- 1x Febi Screw (05140)
- 2x Febi Nut (05139)
- 1x Febi Rolling Bearing, suspension strut support mount (22498)
Important compatibility info
Number of Connectors / Ports | 5 |
Weight | 1.61 kg |
Type | Wiper Motor |
Function | Wiper Motor |
Voltage | 24 V |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.031 kg |
Placement on Vehicle | Rear Axle |
Inner diameter | 60 mm |
Thickness | 11 mm |
Outer diameter | 73 mm |
Function | Shaft Seal, wheel bearing |
Material | FKM (fluorocarbon rubber) |
Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.600 kg |
Width | 26 mm |
Number of Teeth | 125 |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (24812)
- 1x Febi Tensioner Pulley, timing belt (24767)
Important compatibility info
Inner diameter | 112 mm |
Thickness | 35 mm |
Function | Ring, wheel hub |
Type | Ring, wheel hub |
Outer diameter | 213 mm |
Material | Steel |
Weight | 2.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.271 kg |
Outer diameter | 59 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.018 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, speed |
Type | Sensor, speed |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.255 kg |
Type | Gas Spring, boot/cargo area |
Housing length | 230.5 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 18 mm |
Stroke | 160 mm |
Eject Force | 530 N |
Housing Diameter | 19 mm |
Length | 415 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.255 kg |
Function | Brake Pad Set, disc parking brake |
Thickness/Strength 1 | 9 mm |
Type | Brake Pad Set, disc parking brake |
Inspection Tag | ECE R90 Approved |
Width | 53.4 mm |
Length | 55.7 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Width | 25 mm |
Number of Teeth | 153 |
Belts | with rounded tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Width | 42.8 mm |
Replaces | 16893 |
Function | Brake Pad Set, disc brake |
Length | 116.8 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.2 mm. 17 mm |
Weight | 1.07 kg |
Placement on Vehicle | Rear Axle |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 22 mm |
Pipe Diameter | 80 mm. 70 mm |
Mounting points diameter | 20 mm |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 670 mm |
Min. Length | 436 mm |
Function | Shock Absorber |
Weight | 6.89 kg |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Replaces | 20223 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 302 mm |
Length | 526 mm |
Type | Air Filter |
Weight | 3.60 kg |
Filter type | Filter Insert |
Inner diameter | 171 mm |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.150 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 516 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Seal, air compressor |
Width | 125 mm |
Material | Metal |
Thickness | 0.5 mm |
Weight | 0.008 kg |
Length | 125 mm |
Type | Seal, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 107 mm |
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Material | PU (Polyurethane) |
Width | 110 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Weight | 0.540 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Function | Stop Light Switch |
Weight | 0.010 kg |
Housing Colour | black/white |
Type | Stop Light Switch |
for OE number | 77 00 414 988 |
Additional Information
Technical Information
Please note colour of connector
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.408 kg |
Placement on Vehicle | Rear Axle |
Height | 48 mm |
Material | PU (Polyurethane), Aluminium |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 102.1 mm |
Width | 44.5 mm |
Additional Information 2 | with anti-squeak plate |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Weight | 0.936 kg |
Thickness/Strength 1 | 16.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Operating Mode | Electric |
Colour | Black |
Number of Connectors / Ports | 4 |
Function | Stop Light Switch |
Type | Stop Light Switch |
for OE number | 46840510 |
Housing Colour | White |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side, Exhaust Side |
Weight | 0.95 kg |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Length | 397 mm |
Height | 7.8 mm |
Width | 91 mm |
Material | MVQ (silicone rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.52 kg |
Placement on Vehicle | both sides |
Length | 656 mm |
Housing Diameter | 22 mm |
Eject Force | 880 N |
Stroke | 165 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 447.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Internal Thread Size | M10 x 1,5 LHT |
Weight | 0.106 kg |
Extra Description | ProKit |
Function | Ball Head, gearshift linkage |
Type | Ball Head, gearshift linkage |
Cone Size | 10 mm |
Paired article numbers | 36326 |
Length | 55 mm |
Placement on Vehicle | transmission sided |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 55 mm |
Function | Bearing, clutch lever |
Thickness | 13 mm |
Inner diameter | 32 mm |
Weight | 0.105 kg |
Type | Bearing, clutch lever |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Placement on Vehicle | both sides |
Length | 640 mm |
Housing Diameter | 19 mm |
Eject Force | 465 N |
Stroke | 248 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 363.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1041 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 4 |
Function | V-Ribbed Belt |
Weight | 0.077 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 17 mm |
Weight | 2.387 kg |
Paired article numbers | 176587 |
Steering arm type | Control Arm |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Upper, Front Axle Right |
Additional Information | with fastening/mounting material |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (107291)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Additional Information | with fastening/mounting material |
Weight | 1.36 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 120 mm |
Outer diameter | 120 mm |
Thickness | 63 mm |
Inner diameter | 27 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Upper, Rear, Rear Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.082 kg |
Inner diameter | 12.2 mm |
Thickness | 40 mm |
Material | Rubber/Metal |
Outer diameter | 39.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023