Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Aluminium |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 140 mm |
| Core Width | 80 mm |
| Core Depth | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.66
Important compatibility info
| Type | Repair Kit, control arm |
| Function | Repair Kit, control arm |
| for OE number | 179-23.30.213-02 S1 |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Nut (15512)
- 1x Febi Fastening Bolt, control arm (15511)
- 2x Febi Spacer Ring (15516)
- 2x Febi Mounting, control/trailing arm (15513)
£107.65
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 67.5 mm |
| Outer diameter | 139 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 105 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 8 |
| Seal Material | Rubber |
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring, with bolts |
| for OE number | 5 0036 1919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of grooves | 12 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| for OE number | 5 0035 6553 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Inner diameter | 15 mm |
| Outer diameter | 55 mm |
| Length | 75 mm |
| Type | Repair Kit, steering idler arm |
| Mounting points diameter | 14 mm |
| Additional Information | with counter nut |
| Function | Repair Kit, steering idler arm |
| Internal Thread Size | M6 x 1 |
| External Thread Size | M30 x 3,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Length | 516 mm |
| Height | 145 mm |
| Width | 289 mm |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Type | Protection Lid, wheel hub |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Cable Pull, manual transmission |
| Inner length 1 | 2923 mm |
| Outer length 1 | 3250 mm |
| Type | Cable Pull, manual transmission |
| for OE number | 81.32655.6322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Operating Mode | Electric-pneumatic |
| Valve type | Solenoid Valve |
| Function | EGR valve, exhaust control |
| Type | EGR valve, exhaust control |
| for OE number | 51.25902.0130 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Additional Information | with lids |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Water pump impeller material | Metal |
| Width | 23 mm |
| Number of Teeth | 142 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 30731727 S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27559)
- 1x Febi Water Pump, engine cooling (22145)
£107.65
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Pull Rod |
| Length | 317 mm |
| Inner diameter | 12 mm |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Width | 286 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
| Filter type | Screen Filter |
| Additional Information 2 | with bolts/screws |
| Height | 59 mm |
| Type | Hydraulic Filter, automatic transmission |
| Length | 608 mm |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Type | Solenoid valve, automatic transmission |
| Extra Description | febi Plus |
| Function | Solenoid valve, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Placement on Vehicle | Rear |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm. 14 mm |
| Pipe Diameter | 42 mm |
| Max. Length | 265 mm |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Voltage | 12 V |
| Function | Interior Blower |
| Type | Interior Blower |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Min. Length | 1004 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information 2 | with nut |
| Paired article numbers | 182958 |
| Thread Size | M24x1,5 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 88.7 mm |
| Additional Information | with Split Pin |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 50 mm |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Number of Teeth | 9 |
| Voltage | 12 V |
| Rated Power | 1.7 kW |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Additional Information 2 | with crown nut |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Cone Size 2 | 30 mm |
| External Thread Size | M24 x 1,5 |
| Length | 978 mm |
| Placement on Vehicle | Front Axle |
| Cone Size | 27 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1056 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 27 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size 2 | 30 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M38 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05040 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| for OE number | 1 672 781 |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 190 |
| Timing Chain Size | G68HRF |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 258 mm. 230 mm |
| Thickness | 458 mm. 138 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.60
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 181829 |
| Cone Size | 25 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.59
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 704 mm |
| Min. Length | 442 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20045 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.58
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 197 mm |
| Thickness | 267 mm. 655 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.55
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 20 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Max. Length | 865 mm |
| Min. Length | 495 mm |
| External Thread Size | M14 x 1,5 |
| Replaces | 20145 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023