Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Starter |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| Weight | 3.28 kg |
| Voltage | 12 V |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.89
Important compatibility info
| Weight | 1.5 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.82
Important compatibility info
| Weight | 7.128 kg |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 22 |
| Min. Length | 973 mm |
| ABS Ring Diameter | 86 mm |
| Wheel Sided Joint Diameter | 76.3 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.81
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 202 mm |
| Thickness | 240 mm. 600 mm |
| External Thread Size | M12 x 1,75, M20 x 1,5, M16 x 2 |
| Weight | 9.5 kg |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.80
Important compatibility info
| Additional Information 2 | with integrated magnetic sensor ring |
| Weight | 1.4 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (101297)
- 4x Febi Screw (101133)
- 1x Febi Nut, kingpin (12181)
£106.79
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 228 mm |
| Thickness | 290 mm. 500 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Weight | 9.1 kg |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.75
Important compatibility info
| Number of Teeth, ABS ring | 29 |
| Weight | 2.10 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 59.2 mm |
| Outer diameter | 129 mm |
| Inner diameter | 25 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.73
Important compatibility info
| Weight | 6.70 kg |
| Thickness | 435 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bellow, air suspension |
| Internal Thread Size | M10 x 1,5, M12 x 1,75, M16 x 1,5 |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.72
Important compatibility info
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 288 mm |
| Weight | 6.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.69
Important compatibility info
| Function | Master Cylinder, clutch |
| Additional Information | with gasket/seal |
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Driver Position | for right-hand drive vehicles |
| Type | Master Cylinder, clutch |
| Weight | 0.264 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.68
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 600 mm |
| Min. Length | 350 mm |
| Pipe Diameter | 63 mm. 54 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Weight | 3.9 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.67
Important compatibility info
| Thread Length | 37 mm |
| Shaft Length | 103 mm |
| Function | Cylinder Head Bolt Set |
| Weight | 9.96 kg |
| Length | 152 mm |
| Spanner Size | 17 |
| External Thread Size | M12 x 1,75 |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Cylinder Head Bolt (18476)
- 34x Febi Cylinder Head Bolt (18477)
£106.66
Important compatibility info
| Min. Length | 1004 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information 2 | with nut |
| Paired article numbers | 182958 |
| Weight | 11.987 kg |
| Thread Size | M24x1,5 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 88.7 mm |
| Additional Information | with Split Pin |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Additional Information 2 | with crown nut |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Length | 1645 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Weight | 12.5 kg |
| Pipe Diameter | 42 mm |
| Cone Size | 28.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Pipe Diameter | 50 mm |
| Weight | 13.6 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Length | 1624 mm |
| Cone Size | 30 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Inner diameter | 167 mm |
| Filter type | Filter Insert |
| Weight | 3.30 kg |
| Outer diameter | 303 mm |
| Height | 525 mm |
| Type | Air Filter |
| Function | Air Filter |
| for OE number | 1 869 994 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Weight | 6.474 kg |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 989 mm |
| Width | 69 mm |
| Thickness | 128 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M24 x 1,5 RHT |
| External Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information | with nuts |
| Outer diameter | 150 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 64 mm |
| Function | Joint, propshaft |
| Weight | 1.49 kg |
| Number of Holes | 8 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (27582)
- 8x Febi Screw (19106)
- 8x Febi Washer (19107)
- 8x Febi Nut (19104)
£106.66
Important compatibility info
| Type | Bellow, air suspension |
| Placement on Vehicle | Rear Axle, Front Axle |
| Additional Information | with piston |
| Outer diameter | 270 mm. 227 mm |
| Weight | 6.4 kg |
| Function | Bellow, air suspension |
| Thickness | 220 mm. 480 mm |
| Rolling piston material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.63
Important compatibility info
| Max. Length | 338 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 79 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| External Thread Size | M14 x 1,5 |
| Weight | 4.53 kg |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.63
Important compatibility info
| Min. Length | 297 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 25 mm |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 330 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 14 mm |
| Weight | 3.0 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.63
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.211 kg |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.RL |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.62
Important compatibility info
| Weight | 0.24 kg |
| Operating Mode | Hydraulic |
| Thickness | 54 mm |
| Function | Tensioner, timing belt |
| Outer diameter | 32 mm |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.62
Important compatibility info
| Number of Chain Links | 154 |
| Function | Timing Chain Kit |
| for OE number | 13028-4M51A S2 |
| Weight | 2.380 kg |
| Chain Type | Silent Chain, Closed chain |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (100629)
- 1x Febi Tensioner, timing chain (104189)
- 1x Febi Guide, timing chain (173850)
- 1x Febi Guide, timing chain (173855)
- 1x Febi Guide, timing chain (173857)
- 2x Febi Gear/Sprocket, camshaft (173858)
- 1x Febi Sprocket, crankshaft (173860)
- 1x Febi Shaft Seal, crankshaft (107663)
£106.62
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 11.8 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 328 mm |
| Thickness | 51.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.62
Important compatibility info
| Weight | 0.69 kg |
| for OE number | 116 050 16 11 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.62
Important compatibility info
| Weight | 7.526 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 687 mm |
| Wheel Sided Joint Diameter | 88.9 mm |
| Transmission-side joint diameter | 85.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.59
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Inner diameter | 10 mm. 45 mm |
| Outer diameter | 185 mm |
| Material | Rubber/Metal |
| Weight | 3.34 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.57
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 3.68 kg |
| Length | 1045 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Stabiliser Diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.55
Important compatibility info
| Weight | 4.90 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 710 mm |
| Min. Length | 445 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20260 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.55
Important compatibility info
| Height | 39 mm |
| Width | 39 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 173 mm |
| Type | Repair Kit, kingpin |
| Weight | 1.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (109533)
- 1x Febi Bush, kingpin (108227)
- 2x Febi Lock Ring, steering knuckle (109458)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (108376)
- 2x Febi Lock Ring, steering knuckle (109459)
- 2x Febi Circlip, kingpin (10553)
- 1x Febi Spacer, kingpin (46072)
- 1x Febi Spacer, kingpin (46073)
- 1x Febi Spacer, kingpin (46074)
- 1x Febi Spacer, kingpin (46075)
- 1x Febi Spacer, kingpin (46076)
- 1x Febi Spacer, kingpin (46077)
- 1x Febi Spacer, kingpin (46078)
- 1x Febi Spacer, kingpin (46079)
- 1x Febi Spacer, kingpin (46080)
- 1x Febi Bush, steering knuckle (107408)
- 1x Febi Seal Ring, steering knuckle (46071)
£106.53
Important compatibility info
| Outer diameter | 163 mm |
| Width | 65 mm |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 27 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Weight | 3.1 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.53
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Cone Size | 19 mm |
| Paired article numbers | 183286 |
| Weight | 2.368 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.53
Important compatibility info
| Water pump impeller material | Metal |
| Additional Information | with gasket/seal |
| Function | Water Pump, engine cooling |
| Additional Information 2 | switchable water pump |
| Seal Material | Rubber/Metal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.52
Important compatibility info
| Function | Mounting, manual transmission |
| Weight | 3.536 kg |
| Placement on Vehicle | Left, Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.52
Important compatibility info
| Min. Length | 422 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 692 mm |
| Placement on Vehicle | Rear Axle |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Function | Shock Absorber |
| Piston conrod diameter | 20 mm |
| External Thread Size | M14 x 1,5 |
| Weight | 6.36 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.50
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| for OE number | 203 835 00 64 |
| Weight | 0.43 kg |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.45
Important compatibility info
| Function | Mounting, manual transmission |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 5.24 kg |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.43
Important compatibility info
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Weight | 5.905 kg |
| Thickness | 175 mm |
| External Thread Size | M30 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.38
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| for OE number | 000 500 03 86 |
| Weight | 1.070 kg |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.37
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.296 kg |
| for OE number | 13513995 |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.36
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Weight | 0.805 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.34
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 29 |
| Min. Length | 619 mm |
| Wheel Sided Joint Diameter | 95 mm |
| Transmission-side joint diameter | 85 mm |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| External Teeth, Wheel Side | 29 |
| Weight | 7.664 kg |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.29
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Outer diameter | 188 mm |
| Inner diameter | 176 mm |
| Weight | 1.9 kg |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.25
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 8.000 kg |
| Bore Diameter | 42 mm |
| Rod/Strut | Pull Rod |
| Length | 415 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.25
Important compatibility info
| Weight | 5.082 kg |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.24
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1515 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Weight | 11.7 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.21
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 181887 |
| Weight | 3.0 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Brake caliper piston diameter | 36 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Weight | 3.0 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181886 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
| Weight | 0.77 kg |
| for OE number | 23890980 |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023