Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.0 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Aluminium |
| Paired article numbers | 183206 |
| Placement on Vehicle | Rear Axle Right |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.38
Important compatibility info
| Weight | 0.03 kg |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.38
Important compatibility info
| Weight | 1.85 kg |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 120 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21724)
- 1x Febi Water Pump, engine cooling (24360)
£98.35
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Capacity | 25 l |
| Number of Connectors / Ports | 5 |
| Weight | 8.5 kg |
| Material | Steel |
| Outer diameter | 276 mm |
| Length | 490 mm |
| Operating Pressure | 15 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.34
Important compatibility info
| for OE number | 5Q0 199 262 BM |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 1.5 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.34
Important compatibility info
| Function | EGR Valve |
| Type | EGR Valve |
| Weight | 0.640 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.32
Important compatibility info
| Function | Timing Chain Kit |
| Timing Chain Size | G53HC |
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Weight | 0.909 kg |
| for OE number | 98 228 270 80 S3 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (171786)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
£98.31
Important compatibility info
| Width | 157 mm |
| Placement on Vehicle | Upper Left |
| Function | Mounting, automatic transmission |
| Length | 193 mm |
| Number of Connectors / Ports | 2 |
| Weight | 1.997 kg |
| Type | Mounting, automatic transmission |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Height | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.24
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Weight | 0.04 kg |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.23
Important compatibility info
| Weight | 0.23 kg |
| Housing Type | with housing |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| for OE number | 13 62 7 566 986 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.23
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 9.070 kg |
| External Teeth, Diff.Side | 41 |
| Min. Length | 759 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.21
Important compatibility info
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Rotor Style | Solid |
| Centering Diameter | 52.3 mm |
| Surface | Coated |
| Weight | 6.7 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Brake Disc Thickness | 8 mm |
| Additional Information 2 | with ABS sensor ring |
| Thickness | 86 mm |
| Outer diameter | 260 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.19
Important compatibility info
| Additional Information | with oil drain plug |
| Weight | 3.65 kg |
| Additional Information 2 | with seal ring |
| External Thread Size | M16 x 1,5 |
| Length | 421 mm |
| Wet Sump Material | Aluminium |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.19
Important compatibility info
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,6, M16 x 2 |
| Weight | 8.8 kg |
| Outer diameter | 258 mm. 227 mm |
| Thickness | 133 mm. 495 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.17
Important compatibility info
| Rod/Strut | Push Rod |
| Mounting points diameter | 19 mm |
| Weight | 10.700 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Outer diameter | 48 mm |
| Length | 573 mm |
| Placement on Vehicle | Rear Axle Left, Lower, Front Axle, Rear Axle Right |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.16
Important compatibility info
| Placement on Vehicle | both sides |
| Weight | 1.625 kg |
| for OE number | 31401726 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.12
Important compatibility info
| Inner length 1 | 775 mm |
| Outer length 1 | 1095 mm |
| Inner length 2 | 687 mm |
| Weight | 1.012 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 997 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.09
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 2.368 kg |
| Cone Size | 19 mm |
| External Thread Size | M16 x 1,5 |
| Material | Aluminium |
| Paired article numbers | 183284 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.07
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.4 kW |
| Weight | 3.102 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.00
Important compatibility info
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Weight | 0.605 kg |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.99
Important compatibility info
| Material | Aluminium |
| Operating Mode | Mechanical |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 1.3 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | non-switchable water pump, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.97
Important compatibility info
| Stabiliser Diameter | 19.6 mm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Weight | 2.18 kg |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171119)
- 2x Febi Link/Coupling Rod, stabiliser bar (36989)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
£97.91
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Weight | 1.33 kg |
| Paired article numbers | 182138 |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (39575)
- 1x Febi Rolling Bearing, suspension strut support mount (179052)
- 3x Febi Nut (37858)
£97.86
Important compatibility info
| Weight | 10.5 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 324 mm |
| Thickness | 77.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79.1 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.84
Important compatibility info
| Outer diameter | 316 mm |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 26 mm |
| Brake Disc Thickness | 28 mm |
| Type | Brake Disc Rotor |
| Weight | 10.58 kg |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Surface | Coated |
| Centering Diameter | 63.6 mm |
| Thickness | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.84
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, engine oil level |
| Material | Plastic |
| Colour | Black |
| Additional Information | with gasket/seal |
| Extra Description | febi Plus |
| Weight | 0.004 kg |
| Type | Sensor, engine oil level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.83
Important compatibility info
| Weight | 1.98 kg |
| Stabiliser Diameter | 19.6 mm |
| Placement on Vehicle | Rear Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information | with rubber mounts |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171117)
- 2x Febi Link/Coupling Rod, stabiliser bar (102444)
£97.83
Important compatibility info
| Weight | 3.135 kg |
| Material | Cast Aluminium |
| Number of Teeth | 2 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.81
Important compatibility info
| Inner length 1 | 650 mm |
| Inner length 2 | 675 mm |
| Weight | 0.940 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 997 mm |
| Outer length 2 | 927 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Weight | 1.42 kg |
| Seal Material | Rubber |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 168 |
| for OE number | 55210628 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11083)
- 1x Febi Water Pump, engine cooling (10599)
£97.80
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 64.5 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Weight | 3.303 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 27 mm |
| Outer diameter | 83 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 0.55 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gasket/seal |
| Weight | 0.770 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 0.883 kg |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 142 |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR |
| Type | Timing Chain Kit |
| Replaces | 30315; 47326 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (26012)
- 1x Febi Tensioner, timing chain (26751)
- 1x Febi Guide, timing chain (24287)
- 1x Febi Guide, timing chain (24286)
- 1x Febi Holder, timing chain tensioner (38015)
- 1x Febi Lock Cover, timing chain tensioner (mounting hole) (38327)
£97.80
Important compatibility info
| Material | Cast Steel |
| Weight | 6.15 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Steering arm type | Control Arm |
| Paired article numbers | 43092 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17 mm |
| Cone Size 2 | 19 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Inner length 1 | 912 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Weight | 1.358 kg |
| Inner length 2 | 722 mm |
| Outer length 1 | 1070 mm |
| Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 2.0 kW |
| Weight | 4.6 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Paired article numbers | 183908 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| External Teeth, Wheel Side | 28 |
| Weight | 6.930 kg |
| External Teeth, Diff.Side | 28 |
| Max. Length | 617 mm |
| Min. Length | 567 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Length | 150 mm |
| Height | 115 mm |
| Width | 150 mm |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Pressure | 180 bar |
| Function | Hydraulic Pump, steering |
| Weight | 2.162 kg |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Paired article numbers | 178322 |
| Weight | 0.953 kg |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side, Right |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 7.27 kg |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43093 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 17 mm |
| External Thread Size | M16 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size 2 | 19 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Extra Description | Standard Medium Kit |
| Weight | 1.680 kg |
| for OE number | 13506-0R020 S2 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (178893)
- 1x Febi Tensioner, timing chain (178483)
- 1x Febi Guide, timing chain (178814)
- 1x Febi Guide, timing chain (178588)
- 1x Febi Gear/Sprocket, camshaft (182260)
- 1x Febi Sprocket, crankshaft (182261)
£97.80
Important compatibility info
| Weight | 2.442 kg |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
| for OE number | 81.30550.0089 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Internal Thread Size | M14 x 2 |
| Weight | 23.4 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 10 |
| Minimum thickness | 38 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Surface | Coated |
| Type | Brake Disc |
| Function | Brake Disc |
| Additional Information 2 | without ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1.7 kW |
| Weight | 3.5 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Type | Starter |
| Function | Starter |
| Weight | 3.84 kg |
| Number of Teeth | 11 |
| Rated Power | 2.1 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 5.31 kg |
| Paired article numbers | 37350 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Bolt Head Diameter | 17 mm |
| Material | Cast Steel |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holders |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 0.943 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Material | Metal |
| Width of castor bearing surface | 30 mm |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Additional Information 2 | with crown nut |
| Internal Thread Size | M38 x 1,5 |
| Weight | 7.4 kg |
| Length | 669 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 2.24 kg |
| Outer diameter | 153 mm |
| Thickness | 41.5 mm |
| Inner diameter | 30 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023