Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M10x1,5 |
| Paired article numbers | 182444 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 918 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 199020 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41.94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Additional Information | with cylinder head gasket, with valve stem seals |
| Type | Gasket Kit, cylinder head |
| Function | Gasket Kit, cylinder head |
| Additional Information 2 | with intake manifold gasket(s), with exhaust manifold gasket(s) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.73
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39352 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
Technical Information
After mounting the screw of the back-end control arm bush has to be tightened with 55 Nm + 90° + 15°
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36595)
£98.69
Important compatibility info
| Number of Teeth | 160 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Width | 25 mm |
| Replaces | 36894 |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (34126)
- 1x Febi Tensioner Pulley, timing belt (36893)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (34783)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (177911)
£98.68
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 568 mm |
| Steering arm type | Trailing Arm |
| Paired article numbers | 39693 |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.67
Important compatibility info
| Function | Repair Kit, kingpin |
| Outer diameter | 43 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, kingpin |
| Length | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (171963)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (171964)
- 2x Febi Circlip (03729)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Spacer, kingpin (46058)
- 1x Febi Spacer, kingpin (46059)
- 1x Febi Spacer, kingpin (46060)
- 1x Febi Spacer, kingpin (46061)
- 1x Febi Spacer, kingpin (46062)
- 1x Febi Bush, steering knuckle (107409)
- 1x Febi Seal Ring, steering knuckle (46056)
£98.67
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Parameter | 6PK + 4PK |
| Outer diameter 2 | 167 mm |
| Outer diameter 1 | 145 mm |
| Number of Ribs | 6 |
| Inner diameter | 13 mm |
| Width | 50 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (36625)
£98.62
Important compatibility info
| Connector Shape | oval |
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023