Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Relay, glow plug system |
| Number of Connectors / Ports | 9 |
| for OE number | 12 37 783 |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | with lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| for OE number | 1706 426 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Lambda Sensor | Heated |
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| ABS Ring Diameter | 82 mm |
| External Teeth, Wheel Side | 36 |
| Transmission-side joint diameter | 96 mm |
| Min. Length | 992 mm |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 98.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Type | Drive Shaft |
| Additional Information | with Split Pin |
| Function | Drive Shaft |
| Transmission-side joint diameter | 88.8 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 921 mm |
| External Teeth, Diff.Side | 37 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M28 x 1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 30 |
| Min. Length | 630 mm |
| Wheel Sided Joint Diameter | 108.6 mm |
| Transmission-side joint diameter | 95 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 2.0 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Rated Power | 2.3 kW |
| Number of Teeth | 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Upper Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| External Teeth, Diff.Side | 24 |
| Min. Length | 625 mm |
| External Teeth, Wheel Side | 30 |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Wheel Sided Joint Diameter | 90 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 30 |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 89 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 628 mm |
| External Teeth, Diff.Side | 24 |
| Wheel Sided Joint Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M10x1,5 |
| Paired article numbers | 182444 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 918 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 100.5 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 1200 mm |
| Wheel Sided Joint Diameter | 106.1 mm |
| Placement on Vehicle | Front Axle Right |
| Thread Size | M33x1,5 |
| External Teeth, Wheel Side | 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 199020 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41.94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.75
Important compatibility info
| Placement on Vehicle | Right Front, Lower |
| Additional Information | with rubber mounts, with lock nut |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196497 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 23.5 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.74
Important compatibility info
| Additional Information | with cylinder head gasket, with valve stem seals |
| Type | Gasket Kit, cylinder head |
| Function | Gasket Kit, cylinder head |
| Additional Information 2 | with intake manifold gasket(s), with exhaust manifold gasket(s) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.73
Important compatibility info
| Number of Teeth | 160 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Width | 25 mm |
| Replaces | 36894 |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (34126)
- 1x Febi Tensioner Pulley, timing belt (36893)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (34783)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (177911)
£98.68
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 568 mm |
| Steering arm type | Trailing Arm |
| Paired article numbers | 39693 |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.67
Important compatibility info
| Function | Repair Kit, kingpin |
| Outer diameter | 43 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, kingpin |
| Length | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (171963)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (171964)
- 2x Febi Circlip (03729)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Spacer, kingpin (46058)
- 1x Febi Spacer, kingpin (46059)
- 1x Febi Spacer, kingpin (46060)
- 1x Febi Spacer, kingpin (46061)
- 1x Febi Spacer, kingpin (46062)
- 1x Febi Bush, steering knuckle (107409)
- 1x Febi Seal Ring, steering knuckle (46056)
£98.67
Important compatibility info
| Length | 1008 mm |
| Outer diameter | 52 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.65
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Parameter | 6PK + 4PK |
| Outer diameter 2 | 167 mm |
| Outer diameter 1 | 145 mm |
| Number of Ribs | 6 |
| Inner diameter | 13 mm |
| Width | 50 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (36625)
£98.62
Important compatibility info
| Connector Shape | oval |
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.61
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 324 mm |
| Thickness | 77.1 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.60
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Mounting bores distance | 75 mm |
| Shock Absorber Type | Gas Pressure |
| Max. Length | 573 mm |
| Bore Diameter | 14 mm |
| Min. Length | 369 mm |
| Type | Shock Absorber |
| Piston conrod diameter | 28 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Pipe Diameter | 58 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.60
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.55
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05022 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 64.5 mm |
| Outer diameter | 297.5 mm |
| Thickness | 98.5 mm |
| Inner diameter | 254.2 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 79 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 255.6 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 716 mm |
| Min. Length | 433 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023