Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Sealing Set, air compressor |
| Weight | 0.35 kg |
| Function | Sealing Set, air compressor |
| for OE number | 001 130 36 15 SK1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Width | 25 mm |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Number of Teeth | 97 |
| Units / Pulleys | incl. hydraulic belt tensioner |
| Weight | 0.960 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26847)
- 1x Febi Tensioner, timing belt (18574)
- 1x Febi Tensioner, timing belt (32577)
£93.84
Important compatibility info
| Weight | 9.0 kg |
| Number of Wings | 10 |
| Seal Material | Paper |
| Additional Information | with gaskets/seals |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Function | Solenoid Valve |
| Number of Connectors / Ports | 2 |
| Weight | 0.441 kg |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Bore Diameter | 10.5 mm |
| ABS Ring Diameter | 96 mm |
| Function | Drive Shaft |
| Bolt Hole Circle Diameter | 110 mm |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 90 mm |
| Transmission-side joint diameter | 85 mm |
| Number of mounting bores | 4 |
| Weight | 6.968 kg |
| External Teeth, Wheel Side | 30 |
| Min. Length | 594 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 0.25 kg |
| Length | 697 mm |
| Housing Diameter | 34 mm |
| Mounting points diameter | 18 mm |
| Eject Force | 640 N |
| Stroke | 200 mm |
| Housing length | 426 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | Right Rear |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 1.109 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Operating Mode | Automatic |
| Width of castor bearing surface | 30 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 8.035 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 887 mm |
| Outer diameter | 52 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 37689 |
| Weight | 5.00 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M14 x 1,5 |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.551 kg |
| Type | Hydraulic Hose, steering |
| Function | Hydraulic Hose, steering |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Cone Size | 19 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 37690 |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Weight | 5.00 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Weight | 3.9 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Length | 565 mm |
| Width | 263 mm |
| Material | PP (Polypropylene) |
| Thickness | 390 mm |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Weight | 3.760 kg |
| Fill quantity | 12 l |
| Type | Expansion Tank, coolant |
| Additional Information | with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.34 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 75.3 mm |
| Function | Drive Shaft |
| Paired article numbers | 183389 |
| Weight | 6.604 kg |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 84 mm |
| Min. Length | 956 mm |
| External Teeth, Diff.Side | 25 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 1.4 kW |
| Weight | 4.6 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Function | Starter |
| Weight | 4.7 kg |
| Voltage | 12 V |
| Rated Power | 2.2 kW |
| Number of Teeth | 9 |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 4.2 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Rated Power | 2 kW |
| Type | Starter |
| Voltage | 12 V |
| Weight | 3.79 kg |
| for OE number | 02E 911 023 LX |
| Number of Teeth | 11 |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Weight | 3.99 kg |
| Rated Power | 2.5 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023