Proud to be a UK-based company
Contact us
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| Placement on Vehicle | Front Axle |
| Length | 1582 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| External Thread Size | M20 x 1,5 |
| Pipe Diameter | 38 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Width of castor bearing surface | 48 mm |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| for OE number | 50 00 677 276 |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Width of castor bearing surface | 24 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
| Outer diameter | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 522 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 18 mm |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 44 mm |
| Min. Length | 370 mm |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 238 240 21 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 28 |
| Additional Information | with Split Pin |
| External Teeth, Diff.Side | 37 |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Transmission-side joint diameter | 89 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Min. Length | 950 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M24x1,5 |
| Paired article numbers | 188153 |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 685 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle, from intermediate steering lever to front axle |
| Length | 900 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Additional Information | with rubber mounts |
| External Thread Size | M14 x 1,5 |
| Steering arm type | Control Arm |
| Paired article numbers | 185609 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 22 mm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.80
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 384 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.80
Important compatibility info
| Rotor Style | slotted/perforated, internally vented |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 390 mm |
| Thickness | 54.3 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.79
Important compatibility info
| Placement on Vehicle | Front |
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
| Driver Position | for right-hand drive vehicles |
| Voltage | 12 V |
| Additional Information 2 | with cable |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.77
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 23939 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.77
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 23940 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.77
Important compatibility info
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 23.8 mm |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.77
Important compatibility info
| Additional Information | with gasket/seal |
| Colour | Black |
| Material | Plastic |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Placement on Vehicle | Cylinder Head Cover |
| for OE number | 22410-2E000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.77
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023