Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Placement on Vehicle | Centre |
| Length | 485 mm |
| Cone Size | 28.8 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 660 mm |
| Material | Steel |
| Steering arm type | Trailing Arm |
| Bore Diameter | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Additional Information 2 | with rolling bearing |
| Inner diameter | 41 mm |
| Length | 200 mm |
| Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.78
Important compatibility info
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 23.8 mm |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.75
Important compatibility info
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 247 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Pipe Diameter | 82 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Max. Length | 284 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.74
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Outer diameter | 168 mm |
| Additional Information 2 | with bolts/screws |
| Inner diameter | 94 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 4PK + 6PK |
| Width | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (49589)
£95.74
Important compatibility info
| Height | 150 mm |
| Outer diameter | 95 mm |
| Filter type | with connection for water sensor, In-Line Filter, with filter heating |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.74
Important compatibility info
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 25 mm |
| Steering arm type | Control Arm |
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 41732 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 905 mm |
| Width | 52 mm |
| Outer diameter | 42 mm |
| Thickness | 116 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information 2 | with self-locking nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.72
Important compatibility info
| Outer diameter | 390 mm |
| Voltage | 12 V |
| Rated Power | 187 W |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Number of Wings | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.70
Important compatibility info
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Inner diameter | 30 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Thickness | 100 mm |
| Outer diameter | 132 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.69
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.65
Important compatibility info
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Placement on Vehicle | Front Axle |
| Length | 837 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.61
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Placement on Vehicle | transmission sided, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.61
Important compatibility info
| Number of Doors | 4 |
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Paired article numbers | 27345 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.60
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Function | Interior Blower |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.60
Important compatibility info
| Placement on Vehicle | Left, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.60
Important compatibility info
| Length | 565 mm |
| Width | 263 mm |
| Material | PP (Polypropylene) |
| Thickness | 390 mm |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Fill quantity | 12 l |
| Type | Expansion Tank, coolant |
| Additional Information | with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.58
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 37 |
| Number of Teeth, ABS ring | 54 |
| Min. Length | 768 mm |
| ABS Ring Diameter | 110 mm |
| Wheel Sided Joint Diameter | 99 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.58
Important compatibility info
| Material | Plastic |
| for OE number | 2 850 847 |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.58
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 45.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.57
Important compatibility info
| Length | 34 mm |
| External Thread Size | M16 x 1,5 |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with seal ring |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.56
Important compatibility info
| Additional Information | with fastening/mounting material |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| for OE number | 11 61 7 501 566 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (26100)
- 1x Febi Hose, crankcase ventilation (46301)
- 1x Febi Hose, crankcase ventilation (47223)
- 1x Febi Hose, crankcase ventilation (36680)
- 1x Febi Hose, crankcase ventilation (33113)
£95.54
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 36253 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.53
Important compatibility info
| Function | Centre Rod Assembly |
| Rod/Strut | Guide Rod |
| Thread Type | with right-hand thread |
| Placement on Vehicle | Front Axle |
| Length | 946 mm |
| Width | 42 mm |
| Outer diameter | 42 mm |
| Cone Size | 26 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Thickness | 83 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.52
Important compatibility info
| Additional Information | with gasket/seal |
| Function | Throttle body |
| Number of Connectors / Ports | 5 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 72 mm |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.51
Important compatibility info
| Housing Type | without housing |
| Additional Information | with gasket/seal |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.51
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with crown nut |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| External Thread Size | M16 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179167 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.50
Important compatibility info
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 351 mm |
| Core Width | 852 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.46
Important compatibility info
| Type | Selector-/Shift Rod |
| Function | Selector-/Shift Rod |
| External Thread Size | M10 x 1,5 |
| Additional Information 2 | with angled ball joint |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.46
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 755 mm |
| Inner length 2 | 715 mm |
| Outer length 1 | 1083 mm |
| Outer length 2 | 987 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.45
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 174775 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.44
Important compatibility info
| Outer length 1 | 1240 mm |
| Inner length 1 | 890 mm |
| Inner length 2 | 905 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 1120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.44
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter, exhaust control |
| Operating Mode | Electric-pneumatic |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.43
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 19 mm |
| External Thread Size | M16 x 1,5 |
| Material | Aluminium |
| Paired article numbers | 183284 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.42
Important compatibility info
| Function | Fan Wheel, engine cooling |
| Outer diameter | 700 mm |
| Thickness | 90 mm |
| Bolt Hole Circle Diameter | 155 mm |
| Number of Wings | 8 |
| for OE number | 906 205 04 06 |
| Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.40
Important compatibility info
| Rotor Style | Solid |
| Centering Diameter | 52.3 mm |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 260 mm |
| Thickness | 86.2 mm |
| Brake Disc Thickness | 8 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Function | Brake Disc |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.37
Important compatibility info
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x |
| Type | Bellow, air suspension |
| Outer diameter | 310 mm. 250 mm |
| Thickness | 715 mm. 415 mm |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.37
Important compatibility info
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Surface | Oiled |
| Centering Diameter | 52 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Brake Disc Thickness | 8 mm |
| Additional Information 2 | with ABS sensor ring |
| Thickness | 86 mm |
| Outer diameter | 260 mm |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.37
Important compatibility info
| Number of Connectors / Ports | 5 |
| Extra Description | febi Plus |
| Function | Resistor, interior blower |
| Weight | 0.20 kg |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.35
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 301 965 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.35
Important compatibility info
| Type | Cylinder Head Gasket Set, air compressor |
| Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.32
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 36 |
| Min. Length | 799 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 92 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.32
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 31 |
| Number of Teeth, ABS ring | 52 |
| Min. Length | 651 mm |
| ABS Ring Diameter | 88 mm |
| Wheel Sided Joint Diameter | 97.5 mm |
| Transmission-side joint diameter | 92.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.32
Important compatibility info
| Placement on Vehicle | Front |
| Outer diameter | 144 mm |
| Thickness | 38 mm |
| Inner diameter | 14 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Hole Spacing | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.31
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 690 mm |
| Placement on Vehicle | Front Axle |
| Mounting points diameter | 39 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Min. Length | 409 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 40427 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.24
Important compatibility info
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Colour | Black |
| for OE number | 11 12 7 568 581 |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.24
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 334 mm |
| Thickness | 51.6 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.20
Important compatibility info
| Length | 772 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Cone Size | 28.9 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023