Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with gasket/seal |
| Colour | Black |
| Material | Plastic |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Placement on Vehicle | Cylinder Head Cover |
| for OE number | 22410-2E000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.33
Important compatibility info
| Type | Air Dryer, compressed-air system |
| Function | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with integrated oil separator, with dryer |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.31
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.31
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Surface | Coated |
| Outer diameter | 312 mm |
| Thickness | 116 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Centering Diameter | 118 mm |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.31
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 913 mm |
| Inner length 2 | 914 mm |
| Outer length 1 | 1215 mm |
| Outer length 2 | 1207 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.31
Important compatibility info
| Placement on Vehicle | Rear |
| Function | Wiper Motor |
| Voltage | 12 V |
| Type | Wiper Motor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.26
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 43601 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Internal Thread Size | M14 x 2, M12 x 1,75 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.25
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 225 mm |
| Thickness | 195 mm. 340 mm |
| External Thread Size | M24 x 1,5, M16 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Replaces | 37902 |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.21
Important compatibility info
| Thickness | 145 mm. 480 mm |
| Outer diameter | 228 mm. 198 mm |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.19
Important compatibility info
| Placement on Vehicle | Driver side |
| Number of Connectors / Ports | 17 |
| for OE number | 005 545 24 13 |
| Combi Switch Function | Mirror Adjustment, Window Regulator, Safety Switch, Heated wing mirror on/off |
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.17
Important compatibility info
| Additional Information 2 | with screw |
| Paired article numbers | 176771 |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side, Left |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.17
Important compatibility info
| Thickness | 248 mm. 565 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm. 205 mm |
| Function | Bellow, air suspension |
| External Thread Size | M14 x 1,5 |
| Rolling piston material | Steel |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.13
Important compatibility info
| Additional Information | with drive rods |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (34722)
- 1x Febi Drive Shaft, oil pump (34785)
- 1x Febi Drive Shaft, oil pump (34786)
£96.13
Important compatibility info
| Rod/Strut | Push Rod |
| Length | 895.5 mm |
| Function | Centre Rod Assembly |
| Cone Size | 22 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.13
Important compatibility info
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Machining | High-carbon |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 79 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 32 mm |
| Thickness | 62 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 349 mm |
| Brake Disc Thickness | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.13
Important compatibility info
| Number of Teeth | 136 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11222)
- 1x Febi Water Pump, engine cooling (24185)
£96.11
Important compatibility info
| Placement on Vehicle | Right |
| Function | Front Cover Lock |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.11
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 137 |
| for OE number | 028 198 119 C S2 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (01287)
- 1x Febi Timing Belt Kit (14626)
£96.11
Important compatibility info
| Number of Wings | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.10
Important compatibility info
| Width | 30 mm |
| Outer diameter | 158 mm |
| Inner diameter | 39 mm |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.10
Important compatibility info
| Placement on Vehicle | Right |
| Function | Front Cover Lock |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.07
Important compatibility info
| Placement on Vehicle | Left |
| Function | Front Cover Lock |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.07
Important compatibility info
| Length | 222 mm |
| Width | 44 mm |
| Outer diameter | 73 mm |
| Thickness | 140 mm |
| Inner diameter | 47 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.06
Important compatibility info
| Voltage | 12 V |
| Function | Throttle body |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| for OE number | 03F 133 062 B |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.02
Important compatibility info
| Length | 193 mm |
| Additional Information | with fastening/mounting material |
| Bearing Type | Ball Bearing |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Inner diameter | 35 mm |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.98
Important compatibility info
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width | 25 mm |
| Number of Teeth | 145 |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner Pulley, timing belt (47604)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (103622)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (199433)
£95.97
Important compatibility info
| Outer diameter | 252 mm. 311 mm |
| Thickness | 144 mm. 320 mm |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| External Thread Size | M22 x 1,5, M12 x 2, M16 x 2 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.96
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M14 x 1,5 |
| External Teeth, Wheel Side | 33 |
| Min. Length | 596 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 130 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.96
Important compatibility info
| Extra Description | Basic Short Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 170 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 06H 109 158 J S2 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45956)
- 1x Febi Tensioner, timing chain (49551)
- 1x Febi Guide, timing chain (102437)
- 1x Febi Guide, timing chain (102194)
- 1x Febi Guide, timing chain (102427)
£95.93
Important compatibility info
| Seal Material | Paper, Rubber |
| Housing material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 51.06500.6708 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.85
Important compatibility info
| Mounting points diameter | 8 mm |
| for OE number | 82 01 183 788 |
| Internal Thread Size | M16 x 1,5 |
| Number of mounting bores | 3 |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Inner diameter | 11 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.85
Important compatibility info
| Extra Description | Standard Medium Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 03E 198 229 A S1 |
| Timing Chain Size | G53HP, G53HR, G53AM, G53HC |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17617)
- 2x Febi Gear/Sprocket, camshaft (27080)
- 1x Febi Sprocket, crankshaft (27068)
- 1x Febi Tensioner, timing chain (25412)
- 1x Febi Guide, timing chain (25457)
- 1x Febi Guide, timing chain (25467)
- 2x Febi Bolt, camshaft gear (32183)
- 1x Febi Pulley Bolt (32025)
£95.83
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 882 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5, M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.83
Important compatibility info
| for OE number | 11 31 8 618 318 S8 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Tensioner, timing chain (47638)
- 1x Febi Sprocket, crankshaft (30477)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
£95.83
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 361 mm |
| Core Width | 707 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.83
Important compatibility info
| Length | 1735 mm |
| Pipe Diameter | 50 mm |
| Cone Size | 32 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Housing material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 542 200 19 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Housing material | Aluminium |
| Track rollers material | Metal |
| Outer diameter | 70 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Placement on Vehicle | Centre |
| Length | 485 mm |
| Cone Size | 28.8 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 660 mm |
| Material | Steel |
| Steering arm type | Trailing Arm |
| Bore Diameter | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.7 kW |
| for OE number | 0AH 911 023 BX |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Additional Information | with hose |
| Additional Information 2 | with clamps |
| Housing Colour | Black |
| Type | Repair Kit, oil separator (crankcase ventilation) |
| Housing material | Plastic |
| Function | Repair Kit, oil separator (crankcase ventilation) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (38773)
- 1x Febi Hose, crankcase ventilation (181755)
- 2x Febi Hose Clamp (48348)
£95.81
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 37 |
| Number of Teeth, ABS ring | 54 |
| Min. Length | 768 mm |
| ABS Ring Diameter | 110 mm |
| Wheel Sided Joint Diameter | 99 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.81
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 755 mm |
| Inner length 2 | 715 mm |
| Outer length 1 | 1083 mm |
| Outer length 2 | 987 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.81
Important compatibility info
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| for OE number | 059 145 201 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.80
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Additional Information 2 | with rolling bearing |
| Inner diameter | 41 mm |
| Length | 200 mm |
| Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.78
Important compatibility info
| Function | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 23.8 mm |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.75
Important compatibility info
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 247 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Pipe Diameter | 82 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Max. Length | 284 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.74
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Outer diameter | 168 mm |
| Additional Information 2 | with bolts/screws |
| Inner diameter | 94 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 4PK + 6PK |
| Width | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (49589)
£95.74
Important compatibility info
| Outer diameter | 390 mm |
| Voltage | 12 V |
| Rated Power | 187 W |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Number of Wings | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.70
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023